Tower Speakers

36 Pairs of Tower/Floorstanding Speakers Available

Last Update:

Klipsch Heresy 1Specifications:
Frequency Response: 50 to 17,000 Hz
Crossover: 700 Hz, 6000 Hz
Sound Pressure Level: 96 dB
Power input Maximum 105 Watts (Program)
Impedance: 8 Ohms nominal
Dimensions: Height: 21 3/8", Width: 15 1/2", Depth 13 1/8", Weight: 44.7lb (each)
Pricing: Our pair has been beautifully refinished in solid cherry veneer. Grills have been freshly re-clothed, and we special ordered replica Klipsch "Laser" badges to complete the look. We made the conscious decision to leave the back panels original so as to not cover the original labels. They are not sequentially numbered, but they are a beautiful pair, and they sound fantastic, with all drivers doing their jobs perfectly. They also look fantastic on our Radique Audio Hand-Crafted 14" Cherry Finished Speakers stands (sold separately).
Includes soft copy of original 2-Page Klipsch Spec-Sheet in PDF. Asking $1895 for these gorgeous, custom refinished Klipsch Heresy 1's in beautiful condition, and sounding fantastic.
Our price is firm on this pair, as our costs were very high, and they are quite special.

Handsome 4-Way NHT Towers in High Glossy Black Finish 2.9Handsome (pics don't do this pair justice) Distinctive 4-Way NHT Towers in High Glossy Black Finish with very impressive performance.
The NHT 2.9 while not bulky, still can't be described as a "small" speaker, and at 78lbs each, they are certainly not light. However, because they are so slim, they provide a better than average "Spouse Approval Factor", while boasting a truly impressive depth and range of sonic reproduction, particularly for their scant 7" in cabinet width.
Radique's Take: Mark has had a chance to do some critical listening with these NHT's, and was very impressed. He wanted to keep them, but as usually happens here, he was vetoed.
A narrow, fairly deep floorstanding design, the 2.9 is designed to be positioned slightly out from the wall, more closely than most audiophile speakers. It also is intended to be positioned at right angles to the wall behind it, with the front baffle's built-in inward slant providing the needed toe-in. (NHT calls this design FIG, for Focused Image Geometry.) The 2.9s are mirror-imaged, or "handed," with the woofers mounted on the inside edges.
The 2.9's upper-range driver configuration consists of 6.5" and 4" mid and upper-mid drivers, and a 1" metal-dome tweeter. It incorporates a 10-incher positioned low and to the rear on the cabinet's inner side panel. The 10" drive-unit uses an impressive motor design and is claimed to have a peak-peak excursion of more than 1". Two sets of rear-panel terminals allow for biwiring or bi-amping. The heavy, solidly built cabinet is constructed of 1" MDF, finished in glossy black.
Because the 2.9's cabinet is so narrow, metal brackets are provided to improve its stability. These fasten to the bottom of the enclosure and extend its footprint at the base by about 4"—enough to prevent it from easily tipping over. Metal cones screw into the ends of these brackets to provide additional sonic isolation.
Description: Four-way, floorstanding, acoustic-suspension loudspeaker. Drive-units: 1" fluid-cooled aluminum-dome tweeter, 4" polypropylene-cone upper-midrange unit, 6.5" polypropylene-cone lower-midrange unit; 10" long-throw polypropylene-cone woofer.
Crossover frequencies: 100Hz, 320Hz, 3.5kHz.
Frequency response: 26Hz-26kHz, ±3dB.
Sensitivity: 87dB/W/m.
Impedance: 6 ohms nominal, 3.1 ohms minimum.
Recommended amplifier power: 30-250 Wpc.
Dimensions: 39.5" H by 7" W by 21.5" D. Weight: 78 lbs each.
Retailed new for $2675 USD ~ $4100 Cnd with HST. Asking $1495 for these attractive, great sounding NHT Floorstanders. Please note, we have the metal out-rigger's for these speakers, but did not include them in our pictures, as the speakers are difficult to transport with the stability brackets attached.

Impressive, Hand Crafted Compact Totem Towers ArroImpressive, Hand Crafted Compact Totem Towers in Black Ash Finish
From Totem:
"Straight to the heart
The Totem Arro shoots straight to the heart. The Arro’s strong frequency extension and broad-spectrum harmonics blend in a phase-perfect conjunction that transmits the true essence of music. With its ultra-slim design, the alluring and versatile Arro speaker is an aesthetic room-pleaser that allows endless placement possibilities.
Omni-directional in character, the Arro defies the laws of physics with extreme bass extension and holographic sound imaging. If you like authentic-sounding performances that reach beyond the realm of space and time, experience the streamlined beauty of the Totem Arro.
Customized Drivers
Every single driver is completely unique to Totem and proprietary in design, engineered by Totem and then manufactured to the strictest standards to meet our parameters by the finest raw driver suppliers in the world. In some cases, where the technology is beyond the capabilities of suppliers or is wished to kept secret, Totem can and will build our own drivers. Every driver exhibits phase linearity, speed, emotion, off axis natural presentation, and spatial articulation.
Handmade Crossovers
Totem crossovers don’t require many parts because of the synergy between our customized drivers, but the components are the world’s best. Our crossovers aren’t built on PCB’s because the laminated conductive tracks are weak and inconsistent. Instead they are secured to a thin piece of fiberboard or insulated polymers and components are mechanically crimped together because it simply sounds better. When we must solder, we choose WBT Silver Solder, the purest in the industry.
Artisanal Cabinet Construction
Meticulously hand crafted for peak performance that lasts decades. Lock-Miter assembly is an intricate woodworking procedure where edges physically interlock together. The resulting cabinet is up to 5 times stronger than conventional V Groove cabinets. Internal and external veneering resists warping, structurally fortifies, and ensures consistent peak performance. Industry unique Borosilicate damping manages dissipation, keeps the cabinet musically alive, and never deteriorates. Popular materials like poly fillers eventually decay, dramatically affecting the performance. Variable Density Fiberboard is denser at the extremities than the interior to reduce repetitive nodes and resonances.
Two sets of high conductivity gold plated connectors efficiently capture the incoming signal for superior speaker performance and allow traditional, bi-wire, or even bi-amplification options. They accommodate a variety of connection options such as bare wire, banana plugs, and spades."
Design Highlights:
Ultra slim design
Aesthetic compactness
Easily installed close to back walls
Absolute surreal imaging
Great bass extension with speed, alacrity and phase correctness
Full monocoque chassis
Interlocking mitred joints
Borosilicate damping
Specially modified proprietary drivers
Frequency Response 40 Hz - 20 kHz ± 3 dB
Impedance 4 ohms
Crossover Frequency 2.4 kHz, 2nd order, Linkwitz-Riley (optimized)
Recommended Power 20 - 80 W
Sensitivity 87 dB
Woofer 4.5” / 11.43 cm sandwich cone double magnet
Tweeter 1 impregnated textile dome 0.75” / 1.9 cm (low resonance freq.)
Dimensions: Width 5.1” / 13 cm, Height 33.5” / 85 cm, Depth 7.1” / 18 cm
If you're looking for a high quality, small footprint speaker with excellent SAF (Spouse Approval Factor), then look no further.
This current model Totem speaker retails new for $3000 plus HST. Asking $1395 for this hand-crafted pair of Canadian floorstanders.

Attractive, Current Model KEF Floor-Standers Black Q750Attractive, Current Model KEF Floor-Standers with Uni-Q technology, Black
Room-filling sound from KEF
If you're hip to the high level of craftsmanship that goes into KEF's speakers, then you might be intrigued by the Q750, the medium-sized tower in the British hi-fi company's value-oriented Q Series lineup. It combines an elegant, grille-less design with exceptional musical performance. A pair of these floor-standers can fill even large rooms with accurate, ear-pleasing sound.
A room-filling "sweet spot," thanks to Uni-Q® technology
KEF's patented Uni-Q technology places the Q750's 1" aluminum dome tweeter into the acoustic centre of the cabinet's topmost 6-1/2" woofer. This concentric design allows sound to originate from a single point source, making the speaker's "sweet spot" (the ideal listening position) much larger.
Ideal for music, movies, and more
The speaker's 6-1/2" Uni-Q driver is joined by a separate 6-1/2" woofer dedicated to reproducing low frequencies. These two woofers team up with a pair of passive radiators to deliver accurate, punchy bass with your favourite albums, movies, sports broadcasts, and video game soundtracks.
Product highlights:
1" vented aluminum dome tweeter with waveguide
Dual 6-1/2" aluminum woofers
The tweeter and topmost woofer use KEF's Uni-Q technology, which places the tweeter in the center of the woofer this specialized positioning creates a large listening "sweet spot" in your room
Dual 6-1/2" aluminum passive radiators for enhanced bass performance
Frequency response: 48-28,000 Hz (±3 dB)
Sensitivity: 88 dB
Impedance: 8 ohms
Recommended amplifier power: 15-150 watts
Bass-reflex (passive radiator) design
Binding post speaker terminals
Optional magnetic grille available separately
Dimensions: 12-3/4"W x 38-1/2"H x 12-1/4"D (with plinth and spikes), weight: 36.5 lbs. each
These attractive, current model speakers originally listed for $999 each, and are currently on sale at some of the big box stores for $699 each ~$1580 with HST.
Included: outriggers with mounting hardware, carpet spikes and printed manual.
Asking just $1195 for this mint condition pair, complete with original packaging, and Radique's Perpetual Trade-Back & Warranty.
Carver Cinema 5.2Specifications: (Towers)

Power Handling: 350 Watts (200 Watts for the top 3 drivers in each towers, 150 Watts for each subwoofer (provided by the Lightstar Power Amplifier)
Nominal Impedance: 4 Ohms
Frequency Response: 24 Hz - 21 kHz
Sensitivity: 89 dB
Dimensions: (W x D x H) 8" x 15" x 42", Weight: 65 lbs each.

Specifications: (Center Speaker)
2 x 5.5" Midrange Drivers, 1 x 1" Tweeter
High Stiffness, Multi-fiber cabinet for reducing unwanted acoustical vibrations, Magnetically Shielded.
Power Handling: 200 Watts
Nominal Impedance: 4 Ohms
Frequency Response: 80 Hz - 21 kHz
Sensitivity: 91 dB
Dimensions: (W x D x H) 20" x 7.75" x 9.25", Weight: 30 lbs each.
Includes soft copy of manual in PDF. These three speakers are being sold as a package only.
Definitive Technology BP 7004Product highlights:
Bipolar speaker technology
Frequency response 16-30,000 Hz
Sensitivity 92 dB
8-ohm impedance
Handles up to 300 watts
Video-shielded for safe placement next to any TV
Front array: one 5-1/4" woofer and 1" pure aluminum dome tweeter
Rear array: one 5-1/4" woofer and 1" pure aluminum dome tweeter
One 10" long-throw subwoofer coupled to two 10" low bass radiators
Built-in 300-watt subwoofer amplifier with adjustable volume control
Subwoofer auto on/off
One pair of 5-way binding posts
Line-level LFE input (optional connection for use with receivers with LFE output)
6-foot AC power cord
Piano-gloss black finish
Dimensions: 5-5/8"W x 42-3/4"H x 14-1/8"D, Weight: 59lbs each
Speakers are in great cosmetic condition and are working perfectly, providing very impressive, full-range sound for their modest size. Includes set of matching carpet spikes.

ELAC's Debut 2.0 Series Flagship 4 Driver Tower Speakers DF62-BkELAC's Debut 2.0 Series Flagship 3-Way, 4 Driver Tower Speakers
ELAC's original Debut F6 floor-standing speaker was a true customer favourite, garnering high praise and stellar reviews. The newly designed Debut 2.0 F6.2 offers even better performance in a taller, slimmer cabinet. This new tower also sports an improved 1" silk dome tweeter for extended high-frequency response, and a trio of updated 6-1/2" aramid-fibre woofers for smooth mids and punchy bass.
Custom-built for excellent sound
Fans of ELAC know that renowned speaker designer Andrew Jones has been at the helm of the Debut series since the beginning. Jones himself designs the magnets, woofers, crossovers, and enclosures for each Debut speaker, which allows for high-quality components without the added cost of outsourcing parts and supplies.
A high-quality crossover directs traffic
One of the F6.2's performance secrets is its custom-designed multi-element crossover. Jones uses this important component to ensure smooth frequency distribution between each of the drivers. The result is full, natural sound from a floor-stander that won't wreak havoc on your budget. Use a pair of the F6.2s as part of a great-sounding stereo or Debut 2.0 Series home theatre system.
Product highlights:
3-way design
1" silk dome tweeter with wide-dispersion waveguide for smooth, accurate highs and extended high-frequency response
6-1/2" aramid-fiber dedicated midrange driver with oversized magnet and vented pole piece
Dual 6-1/2" aramid-fiber woofers for punchy bass
Frequency response: 39-35,000 Hz
Sensitivity: 87 dB
Impedance: 6 ohms
Recommended amplifier power: up to 140 watts
Bass-reflex (ported) cabinet with rear-firing ports
Custom multi-element crossovers with high-grade components to ensure smooth transition between drivers
5-way binding post speaker terminals
Thick MDF cabinet walls with black ash vinyl finish
Cabinet walls are internally braced for reduced resonance and improved stability
Dimensions: 8-1/8"W x 44-5/16"H x 11-5/8"D, Weight: 44 lbs.
MSRP of $999 per speaker, this current model is selling right now for $899 per speaker at Crutchfield ~ $2030 with HST. Asking just $995 for this pair of recent model ELAC towers, in very good condition.

Attractive, Great Sounding B&W 3-Driver Floor-Standers DM603These are audiophile-grade reproducers.
The 600 series takes its place in a distinguished family tree that includes the world renowned Matrix 801 and the Matrix 802. Something of this superb pedigree was bound to rub off in the same way that a luxury car benefits from racing technology, a 600 series loudspeaker speaker system brings with it the pleasure of acquiring the worlds leading acoustic expertise with inherent good value.
The DM603 delivers unexpected power from a moderately sized speaker. Its enclosure accommodates two 8” low frequency units. The bass performance is further enhanced by the use of heavier Cobex cones in the low-frequency drivers delivering a lower fundamental resonance frequency.
The build quality is fantastic- very heavy with lots of internal bracing. They can be bi-amped.
While these speakers are rated for use with amplifiers from 25W to 150W, I would recommend driving them with at least 75 Watts per channel, as less than that seems to run the risk of damaging the tweeters at volume. These tweeters sound great, but they definitely "like" higher power amplifiers.
Boast Dual pairs of Gold-plated 5-Way bindings suitable for bi-wiring.
Enclosure type fourth-order vented box
Drive units two 180mm (one bass, one bass/midrange); 26mm tweeter
Frequency range 37Hz to 30kHz (-6dB)
Frequency response 48Hz-20kHz ±3dB
Crossover frequencies 150Hz and 4kHz
Sensitivity 90dB spl for 283V at 1
Nominal impedance 8 ohms
Power handling suitable for use with amplifiers rated at between 25-150W
Dimensions 850H x 236W x 306D mm, Weight 19kg (42lbs each)
Manufacturer B&W Loudspeakers (UK Sales) Limited, Marlborough
Asking just $895 for this great sounding pair of B&W tower speakers in very good condition.
Klipsch R-28FKlipsch Reference floorstanding speakers feature a front-firing port that is perfectly matched to the cabinet and drivers. This design is precisely flared to minimize turbulence even at the lowest frequencies.
Strong, Flexible, Removable Grille: Adds a rich, refined look that is acoustically transparent, while being less prone to damage then more rigid designs.

Fills medium to large rooms with powerful, lifelike performances
High Frequency Driver: 1" (2.54cm) Aluminum diaphragm compression driver mated to 90° x 90° square Tractrix® Horn
Low Frequency Drivers: Dual 8" (20.3cm), copper spun magnetically shielded IMG woofers
Brushed black polymer veneer cabinet
Dual pairs of quality 5-Way bindings suitable for bi-wiring.
Frequency Response: 35Hz - 24kHz +/- 3dB,
Sensitivity: 98dB @ 2.83V / 1m
Power Handling (Continuous/Peak) 150Watts/600Watts,
Nominal Impedance: 8 Ohms Compatible
Dimensions: 42" H x 9.5" W x 15.7" D, Weight: 56.7 lbs
Canadian MSRP of $699 per speaker (over $1570 with tax per pair).
Energy Connoisseur C-8Legendary Energy Connoisseur C-8 Tower speakers, in high gloss Piano Black.
System Type: Vented, tapered 3 way
Tweeters: 1 - 25mm aluminum dome with cloth suspension
Woofers: 2 - 20.3 cm injection molded aluminum/ polypropylene woofers with polypropylene diaphragm and rubber suspension.
Frequency Response (+/-3dB): 28Hz - 27kHz
Crossover Points: 1800Hz
Room Efficiency: 90dB
Impedance: 8 ohms nominal, 4.5 ohms minimum
Recommended Amp Power: 30 - 300 watts (RMS/Chnl.)
Maximum power handling 300watts
Dimensions: H x W x D (cm) 99.1 x 24.4 x 40.6 Weight: 68 lbs each.
Klipsch RF-62 Ref IVAvailable in a black vinyl finish, the RF-62 comes with a low-diffraction, magnetically attached grille to further accentuate the elegance of this speaker.
Driver Complement:
HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression driver mated to 90˚x 60˚ square Tractrix® Horn
LOW FREQUENCY DRIVERS Dual 6.5" (16.5cm) Cerametallic™ cone woofers
ENCLOSURE TYPE Bass-reflex via dual rear-firing ports
SENSITIVITY 97dB @ 2.83V / 1m
NOMINAL IMPEDANCE 8 ohms compatible
Dimensions: HEIGHT 40.6" (103.1cm) (w/feet), WIDTH 8.5" (21.6cm), DEPTH 15.5" (39.4cm), WEIGHT 54 lbs (24.5kg)
Originally listed for $700 each plus tax.

Heavy Klipsch Towers w/ Dual 8" Woofers 600 Watts RF3 IIHeavy, Horn-Loaded Klipsch Towers with Dual 8" Woofers 600 Watts Peak Power Handling. These made in the USA RF3 II's are extremely efficient, provide lots of bass and are in very good condition.
These rear-ported speakers boast dual pairs of 5-Way bindings suitable for bi-wiring / bi-amping.
SENSITIVITY: 98dB @ 1watt/1meter
POWER HANDLING: 150 watts maximum continuous (600 watts peak)
TWEETER: K-124-K 1" (2.54cm) Titanium dome compression driver
HIGH FREQUENCY HORN: 6" square 90(o)x60(o) Tractrix(r) Horn
WOOFER: Two K-1083-SB 8" (20.32cm) Cerametallic(r) cone / cast polymer frame
ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF)
ENCLOSURE TYPE: Bass reflex via rear-mounted port
DIMENSIONS: 38.5" (97.8cm) x 9" (22.9cm) x 16.2" (41cm)
WEIGHT: 56 lbs. (25.5kg) each
Asking just $695 for these impressive, powerful, horn-loaded Klipsch towers, made in the USA.

High End PSB Tower Speakers in High Gloss Black Stratus SilverHigh End PSB Tower Speakers in High Gloss Black. These speakers sound fantastic, but the cabinets on them are only in "Fair to Good" condition, and we do not have the grills for them. Hence the $300 lower price as we would normally list them for $995. The Stratus Silvers used to be the 2nd best speakers in PSB’s lineup (after the Stratus Golds). However, compared to the Stratus Golds which were very power hungry and required a high current amp to sound their best, the Silvers are quite efficient and sound great with a wide variety of amplifiers from quality receivers to high end amps.
Another advantage the Silvers have over their bigger brother is that they are not nearly as sensitive to placement. Put the Golds too close to the back wall & they're almost certainly sound boomy whereas the Silvers are significantly more versatile, placement-wise. For these reasons, many audiophiles actually prefer the Silvers over the Golds.
Frequency Range
Response (Anechoic Chamber)
On Axis @ 0° ±3dB 35-21000 Hz
On Axis @ 0° ±1.5dB 40-20000 Hz
Off Axis @ 30° ±1.5dB 40-10000 Hz
Lf Cutoff -10dB 26 Hz
Sensitivity (1w (2.83V) @ 1m IEC-filtered Pink Noise C-weighted)
Anechoic Chamber 89 dB, Typical Listening Room 91 dB
Impedance: Nominal 4 Ohms, Minimum 4 Ohms
Input Power (RMS Clipping < 10% of the Time)
Recommended 15-250 Watts
Program 200 Watts
Dynamic Peak 400 W
Acoustic Design
(Nominal) 1" (25 mm)
Aluminum Dome with Ferrofluid
(Nominal) 2 x 6 1/2" (165 mm)
Polypropylene Cone
Rubber Surround
1 1/2" Voice Coil
20 oz (794 g) Magnet)
2100 Hz, 24 dB/octave Linkwitz-Riley
500 Hz, 18 dB/octave Butterworth
Internal Volume
200 cu ft (56.27 liter)
Design Type: Bass Reflex, 2 1/2" Front Port
Dimensions: Size (W x H x D) Millimeters 241 x 990 x 349 mm with 25 mm base, Inches 9 1/2 x 39 x 13 ¾" with 1" base
Net Weight: Kilograms 25.2 kg /each, Pounds 56 lb /each
Original Price (CAN MSRP): $2399.00/pair + Tax
Asking just $695 for these fabulous sounding, Canadian-made floor-standers from PSB.
Focal Sib XXLFrance's Focal is famous for making fantastic speakers.
Aluminum dome tweeter with OAL (Optimum Acoustic Louding) phase plug: Exceptional bandwidth up to 35kHz for wide dispersion, smooth and dynamic treble, compatible with new high performances audio format.
Polyflex cone woofers: high performance synthetic cone for high dynamic bass impact and detailed mid-range.
OPC (Optimum Phase Crossover): phase optimization for a precise, natural and stable sondstage.
Braced curved precision MDF cabinets: rigid cabinet without any internal resonance for lower coloration.
Front laminar port: for a vigorous bass reproduction.
Magnetic shielded: SiB XXL can be safely placed near your TV without fear of generating any distortion.
Woofer: Two x 5" Polyflex cone
Tweeter: 3/4" OAL aluminum dome
Frequency response (+/-3dB): 55Hz - 35kHz
Sensitivity (2.83 V/1 m): 90dB
Power handling: 120W
Crossover: OPC 12dB/oct, 3.5kHz
Nominale/minimum impedance: 8ohms/3.3ohms @ 250Hz
Dimensions (HxWxD): 33-1/2x7-7/12x9" (851x193x230mm), Net weight: 17.2lbs (7.8kg)
They listed new for $1499 plus tax
NHT Super TwoExcellent NHT 3-Way Tower Speakers in High Gloss Piano Black Finish
Its small footprint lets you place it in even the tightest spaces.
Video-shielded (upper drivers)
Frequency response 35-25,000 Hz (±3dB)
8-ohm impedance
Sensitivity 87 dB
Each handles up to 175 watts
5-way binding post connectors
High-gloss black laminate finish
Dimensions: 39-1/4"H x 11"W (includes outriggers) x 11-1/4"D
Retailed new for $750 USD ~ $1100 CND with HST.
Infinity Beta 40The Betas are our favourite mid-range series from Infinity. We've been using a pair of trusty Beta 50's in our primary listening area for the past several years, and we'd used Beta 40's previously for the same application. We had them set up in a bi-wired configuration, and they sound extremely impressive for this price point.
Music and movie lovers will find a lot to like in Infinity's Beta 40. This slender tower speaker uses Infinity's most advanced drivers to produce a wide soundstage and precise imaging. Its solid MDF cabinet houses a 1" tweeter, a 5" midrange, and dual 6-1/2" woofers. You'll enjoy detailed, accurate highs and mids plus distinct, musical bass.
This speaker owes its open, natural sound to Infinity's patented Ceramic Metal Matrix Diaphragm driver material — the same material Infinity uses in their top-of-the-line models. CMMD™ combines layers of ceramic with a stiff metal core for crystal-clear sonic performance. It's strong and durable, yet incredibly lightweight and responsive.
Features: video-shielded, bass-reflex (ported) enclosure, two sets of quality 5-way binding posts for bi-wiring, innovative metal grills (great for preventing small hands from denting the domes or cones)
Power Handling of 200 Watts at 8 Ohms impedance, Frequency response 45-20,000 Hz (±3dB), Sensitivity of 91 dB
Drivers: 3-way design featuring: 1" CMMD tweeter, 5" CMMD midrange driver, dual 6-1/2" CMMD woofers
Dimensions: 8-7/8"W x 38-5/16"H x 13-3/8"D. Weight: 50.26 pounds each.
MSRP of $800 USD.
Infinity SM 115Infinity Studio Monitor Series Super High Efficiency Speakers.
These superb speakers were under-valued in their day, priced to compete with lower-quality offerings, but truly deserving of their "Studio Monitor Series" designation. Their smooth and transparent response make them ideal for classical music or jazz - without the "jukebox" bass suited to rock or disco music.
They're also perfect for building a home theater system on a budget, able to provide clear dialog without a center-channel speaker and all the necessary explosions and earthquakes without a sub-woofer. And due their super-high efficiency (see specs below) they can do it all without a high-powered amplifier.
Type: 3 way, 3 driver loudspeaker system
Frequency Response: 35Hz to 27kHz
Recommended Amplifier: 10 to 175W
Crossover Frequency: 900, 5500Hz
Impedance: 8Ω
Sensitivity: 100dB/1m/1W (!)
Bass: 1 x 10"
Midrange: 1 x 4.5"
Tweeter: 1 x 1"
Dimensions: 13.5 x 30 x 12.5 inches
Mission 752Fantastic 90's Vintage Small Footprint Mission Towers, Finished in an attractive real-wood veneer.
Bass: 1 x 170mm Aerogel paper
Tweeter: 1 x 26mm ferrofluid cooled
Enclosure: 28 litre, bass reflex
Frequency Response: 40Hz to 20kHz
Recommended Amplifier: 35 to 150W
Impedance: 8Ω
Sensitivity: 90dB
Finish: real wood veneer
Dimensions: 875 x 198 x 255mm, Weight: 18.5kg

Paradigm Slim Towers Monitor 7 v2Beautiful slim tower speakers from Paradigm, made in Canada.
They are working beautifully and are in very good cosmetic condition. Excellent sound with tight bass. Bi-wireable.
3-driver, 2 1/2-way bass reflex,
Quasi-3rd order resistive port
Crossover 3rd order electro/acoustic at 2.0kHz
2nd-order electro/acoustic at 400 Hz
High-Frequency Driver: 25mm (1 in) PTD™ pure-titanium dome and former, ferro-fluid damped cooled.
Bass/Midrange Drivers: Two 165mm (6.5 in) with dicast chassis, ICP™ injection - moulded co-polymer poly - propylene cone, Apical™ former
Low Frequency Extension 33Hz (DIN)
Frequency Response On Axis-0 degrees +/-2db from 47Hz-20kHz
Off Axis-30degrees +/-2db from 47Hz-18kH
Sensitivity Room/Anechoic 93dB/90dB
Suitable Amplifier Power Range 15-175 watts
Maximum Input Power 120 watts
Impedance Compatible with 8 ohms
Internal Volume 45 L/1.60 cu ft
Height, Width, Depth 101.6cm X 19.4cm X 39.1cm; 38.5" X 7 5/8" X 14 3/8"
Weight 34.5 kg/76 lb per pair
Finished in Black Ash
Asking $495 for this great sounding pair of Paradigm tower speakers, made in Canada.

Highly Sought After Vintage Polk 4 Driver Floor-Standers Monitor 10BHighly Sought After Vintage Polk 4 Driver Floor-Standers
Polk’s clever design uses 2 smaller woofers instead of a single large one to maximize the quality of the all-important mid-frequencies and coupled these woofers with a 10” passive radiator to deliver solid deep bass. The result is a smooth, realistic wide-range response.
Nearly identical to Polk Audio Monitor 7 but sized like a Monitor 10, the Monitor 10B's are heavy, solidly built speakers in an attractive Walnut Finish. These acoustic suspension speakers were made in the USA in the early 80's, and they still have an avid following to this day.
Type: 4 driver loudspeaker system
Frequency Response: 25Hz to 26kHz
Recommended Amplifier: 20 to 250W
Impedance: 6Ω
Sensitivity: 89dB
Bass Radiator: 1 x 10" fluid coupled
Midbass: 2 x 6.5" cone
Tweeter: 1 x 1" dome
Dimensions: 28 x 16 x 11.5 inches, Weight: 48lbs
Asking just $495 for these wonderful vintage Polk floor-standers in very good condition and working perfectly.
Realistic Optimus 5B4 Driver, 3-Way Vintage Realistic Speakers with Real Walnut Cabinets
The Optimus 5B's are great sounding Floor-Standers / Stand-Mount Speakers from Realistic, circa 1976, and were made in Japan.
They feature REAL walnut veneered cabinets containing a single woofer with durable rubber surround, two mid range drivers, and a single tweeter.
Speaker Complement:
1 x 12" Acoustic suspension heavy magnet woofer with Brass Voice Coil
1 x extended range high compliance tweeter
2 x midrange speakers
Enclosure: Sealed oiled walnut & non-resonant chip board, internally braced. Removable grill
Controls: 3 Position Midrange level switch, 3 Position Tweeter level switch
Power Rating: 15 Watt Min - 100 Watt Max
Frequency Response: 20 Hz to 20 kHz
Impedance: 8 ohms
Dimensions: 25"H x 14"W x 11.5"D, Weight: 37 lbs
We have had this pair refinished, and they now look as good as they sound. Gorgeous vintage speakers with real wood cabinets in excellent condition, and grill logos intact. Asking $495 for this pair.

Made in Canada Paradigm Slim Towers in Black Ash Monitor 7Attractive slim tower Monitor 7 v1 speakers from Paradigm in Black Ash Finish.
These Monitor 7's were the first of 7 iterations (at the time of this writing) of this long standing model from Paradigm. They are in good cosmetic condition, and still offer great sound for this form factor and price point.
3-driver, 2 1/2-way bass reflex,
Quasi-3rd order resistive port
Crossover 3rd order electro/acoustic at 2.0kHz
2nd-order electro/acoustic at 400 Hz
High-Frequency Driver 25mm (1") PTD
Bass/Midrange Driver 165mm (6 1/2") ICP cone, die-cast chassis
Bass Driver 165mm (6 1/2") carbon- infused cone die-cast chassis
Low Frequency Extension 34Hz (DIN)
Frequency Response On Axis-0 degrees +/-2db from 48Hz-20kHz
Off Axis-30degrees +/-2db from 48Hz-18kH
Sensitivity Room/Anechoic 92dB/89dB
Suitable Amplifier Power Range 15-175 watts
Impedance Compatible with 8 ohms
Internal Volume 45 L/1.60 cu ft
Height, Width, Depth 34.5" × 8" × 14.25", (88cm × 21cm × 37cm)
Weight 39 kg/86 lb per pair
Finished in Black Ash.
Asking $445 for this great sounding pair of made in Canada slim towers from Paradigm.

PSB Image Series Slim Tower Speakers Image 4TGorgeous, great sounding, slim profile 3-Driver tower speakers from PSB in excellent condition.
Description: Floorstanding, video-shielded, biwirable, front-ported loudspeaker, finished in black ash, boasting Dual pairs of 5-Way Gold Plated Binding Posts.
Drive-units: 1" aluminum-dome, ferrofluid-cooled tweeter, two reflex-loaded 5.25" polypropylene-cone woofers with rubber surrounds.
Recommended power: 10-150W.
Nominal impedance: 6 ohms (minimum 4 ohms).
Crossover frequencies: 500Hz, 2.2kHz.
Frequency response: 38Hz-21kHz ±3dB.
Sensitivity (anechoic): 89dB/2.83V/m.
Dimensions: 36" H by 6.5" W by 14.25" D. Weight: 37 lbs each.
Includes PSB outrider stabilizers
Asking just $445 for these quality speakers from legendary Canadian Speaker Company, PSB.
Tannoy mercury mx4-MThe Tannoy mx4-M's are tall, slim and handsome floorstanders, designed to be easy to drive thus giving them compatibility with a wide range of amplification. Twin 145mm bass drivers deliver impactful bass and high power handling - ideal for home cinema and rich, quality hi-fi sounds.
These Tannoy's are Rear-Ported, Magnetically shielded and Biwireable, with dual pairs of Gold-plated 4MM 5-Way Bindings on each speaker, and are finished in beautiful Dark Oak.
Drivers: Tweeter: 25mm soft dome type, Bass: 2 x 145mm ceramic coated paper cone
Power handling: 180 watts,
Sensitivity: 91 dB,
Impedance: 8 ohms,
Frequency response: 31 - 20,000 Hz
Dimensions: Width 7.3 in. Depth 9.7 in. Height 37 in. Weight 24.2 lb each.
Originally listed at $1100. Two pairs available. We normally ask $495 for this model but this pair, which is in good cosmetic condition, has a few blemishes, but still working perfectly and sounding great.
Mission m33iThe Mission M33i is a compact floor standing loudspeaker with powerful extended bass, natural sounding midrange, and finely detailed treble. The combination of high efficiency and wide bandwidth give this speaker impressive power handling and an ease of drive that maximises dynamic performance from a wide range of amplifiers. The M33i is ideally suited for stereo reproduction or as front channels in an AV home theatre system, reproducing movie soundtracks with stunning clarity and impact.
2 way reflex loaded speakers in graphite finish. Boasting Dual pairs of gold-plated 5-Way bindings suitable for bi-wiring / bi-amping.
Frequency Response at 3dB: 48Hz to 20kHz,
Sensitivity SPL/m/2.83V: 90dB,
Crossover Frequency: 2.7kHz
Amplifier Power Range: 25 to 100 watts,
Nominal Impedance: 8 ohm (minimum 3.6 ohms)
Dimensions (HxWxD) in mm: 850x200x325, Weight: 29.4kgs, Effective Volume: 17.7 litres
Original MSRP of $799
Asking just $395 for these high quality, made in England towers, in excellent condition.
DCM TF350A rare pair of DCM Time Frame Model 350 vintage speakers circa 1988.
DCM in their earlier days made their speakers with a Transmission Line design. This extended the bass lower than one would expect considering the small footprint of the speakers. They image wonderfully and are quite sonically transparent.
DCM TF350's have that distinctive Time Window sonic signature. DCM did not stray far from the Time Window success and enjoyed a cult like following in the 1980's. The musical presentation is near holographic. First and foremost is the much improved sound-stage. The depth is quite profound. Although they don't disappear altogether, the cabinets just about go away when listening. So, instead of closing one's eyes and hearing music coming from two distinct places, it's now more of a wall of sound in front of the listener.
The Time Frame speakers are mirror imaged speakers. Meaning there is a left and right to them. By placing the DCM Logo to the inside edges of the pair, this accomplished the mirror image effect. Like the Time Windows they have a fabric sock covering that encircles the entire speaker, with wood trim at the top and bottom of the speaker. They weigh about 32 pounds each and measure 15 inches across the base, stand 38 inches tall and have a depth of about 6 inches. Construction is first rate, these are very sturdy speakers. The base has a fold out pedestal for additional support, a very nice touch.
They have a 6 1/2" woofer and .75 inch kick ass Phillips dome tweeter.
Rated for amplifiers; 20 to 150 watts per channel, and nicely efficient at 90db/1watt/1meter
These speakers excel at Jazz and Classical music as well as vocals. The DCM TF350 can rock, make no mistake about that, but for the over the edge rocker, it won't be mistaking them for Cerwin Vega's or JBL's.
Radique's Take: after listening to these TF 350's extensively, their sound belies their modest driver size; listening blind would have guessed them to be 10" woofers. If you're looking for attractive, great sounding vintage speakers for your music listening system, these might be the ideal choice for you!
Made in the USA in Ann Arbor MI. Asking just $375 for these wonderful vintage floor-standers.
Heavy Vintage Legacy 3-Way Floor-Standers 300BHeavy Vintage Legacy 3-Way Floor-Standers; look great with beautiful wood veneer cabinets.
They are very efficient, boasting good bass response and full, balanced sound.

These 300B's boast 12" Woofers, 5" Mids and 1" Dome Tweeters, and they are rated for 8 Ohms impedance.

Dimensions: 31" H x 16" W x 12" D, Weight: 50Lb's each

Asking just $345 for these gorgeous, great sounding vintage speakers.

Great Sounding NHT 3-Driver Slim Towers VT-1Great Sounding NHT 3-Driver Slim Towers finished in NHT's Distinctive high Gloss Piano Black
The VT-1's are impressive speakers, particularly for their modest / modern form factor. When driven with a good quality amplifier, they sound much larger than they look.
They are magnetically shielded, rear ported, and boast gold-plated 5-Way bindings suitable for banana plugs, and removeable metal carpet Spikes.
2-Way Shielded Tuned Column Loading Floor Standers
Driver Complement: 2 x 4.5" High Compliance Woofers, 1" Fabric Dome Tweeter
Crossover: 2.8 KHz, using low loss, low distortion components.
Sensitivity: 90 dB
Power Handling of 120 Watts @ 8 Ohms Impedance (5 Ohms minimum)
Frequency Range: 65Hz to 21KHz +/- 3dB
Dimensions: 40" H x 5.5" W x 5.5" D, Weight: 21 lbs each.
We normally list this model for $395, but have reduced this pair as they do not include speaker grills. Asking just $345 for these attractive and great sounding towers from California's Well-Regarded Now Hear This (NHT)

Made in England Mission Floor Standing Speakers 763The smallest of Mission's bi-wirable, floor-standing systems, the 763 builds on the reputation of one of Hi-Fi's true legends, the Mission 770.
Using the latest version of that speaker's 200mm polypropylene bass unit, Mission exploits the driver's full potential by pairing it with the fabric dome ferry-fluid cooled tweeter of the 762 in a superbly crafted, resonance-controlled cabinet of elegant styling and proportion.
The 763, with its high sensitivity, broad bandwidth and spectacular soundstage, is a cost-effective way of filling rooms of ample dimension, while requiring an amplifier of only medium power.
Equipped with Dual pairs of 5-Way bindings suitable for banana plugs and supporting bi-wiring / bi-amping. Finish: black ash
Type: 2 way, 2 driver loudspeaker system, Bass: 1 x 200mm polypropylene cone, Tweeter: 1 x fabric dome
Frequency Response: 45Hz to 20kHz
Recommended Amplifier: 20 to 125W
Sensitivity: 89dB
Dimensions: 770 x 250 x 338mm, Weight: 16 KG (35lbs) each.
Asking just $295 for these great sounding made in England floor-standers in very good condition.
Sinclair Sculptura Series AV4Attractive Sinclair Sculptura Series 5-Driver Slim Towers The AV4's are the top of the line model in this series. We also have the smaller AV2's in stock listed at $195, will bundle the two pairs together for a special discounted price of just $395.
Capable of powerful output for dynamic home theater effects, the Sculptura AV4 is also sophisticated and precise allowing it to provide a wonderful audiophile music experience. Nothing else will provide this kind of performance and stunning cosmetics, making the AV4 a truly incredible speaker.
Woofers: Quadruple 3” Fusion Drivers
Tweeter: 1" Clarity Soft Dome
Impedance: 8 ohms
Sensitivity: 90dB
Power Handling: 150 Watts
Frequency Response: 75Hz-20kHz
Dimensions HxWxD (inches): 45” x 11.5” x 11” (with base)
Dimensions HxWxD (mm): 1143 x 292 x 280mm (with base)
Asking just $295 for these slim, attractive speakers from Canadian speaker company Sinclair. Bundle them with our matching AV2's for just $100 more.

Solid Acoustic Profiles Tower Speakers, made in Canada PSL-8.4Solidly Built Acoustic Profiles Tower Speakers, made in Canada and in very good cosmetic condition.
These mirror imaged speakers are rear ported, and provide an impressive bass response with plenty of power handling. (We estimate 150 Watts at 8 Ohms, based on the larger model in this series being rated at 200 Watts @ 8 Ohms.)
The PSL-8.4's Boast 8" Woofers with rubber surrounds, and 1" soft dome tweeters, and feature 5-Way bindings suitable for banana plugs.
Dimensions: 32" Height x 15" Depth x 10" Width, Weight: 37 lbs each.
These made in Canada Acoustic Profile Speakers offer great performance for this price point, asking just $245 for this pair of PSL-8.4's in very good condition.
The Focal Sib XL loudspeaker was created to harmonize with flat panel displays.
Designed to be easy to integrate into all interiors, Sib XL is adapted to your everyday needs, whether you are watching films on home cinema systems or listening to your favourite music.
The Sib satellite loudspeaker, the range’s first foray into the universe of high-fidelity sound, can now look back on an impressive longevity as an entry-level compact acoustic speaker. No compromises were made on the acoustic performance, as shown by the impressive list of awards the speaker has won around the world.
Sib was designed to simplify daily life, for all types of music or video content. Thanks to its exceptionally practical design and the multiple ways it can be mounted – the speaker can be positioned on the floor, on furniture or on the wall around your screen – Sib is simplicity itself to install.
Type 2-way bass-reflex LCR speaker.
Drivers 2x5" (2x13cm) Polyflex mid-bass.
OAL 3/4" (19mm) aluminum tweeter dome
Frequency response (+/- 3dB) 67Hz - 35kHz
Low frequency point (- 6dB) 59Hz
Sensitivity (2.83V/1m) 91dB
Nom. impedance 8 ohms
Crossover frequency 3 500Hz
Recommended amplifier power 15 - 150W
Dimensions (HxWxD) 197/8x55/8x41/4", (505x142x108mm), Net weight 8.8lbs (4kg) each.
Pair of matching Focal Hop (tall) stands with required mounting hardware are listed separately for $195.
Fantastic performance from these extremely impressive, over-sized satellite speakers from Focal.
5 Available. Asking $245 each.
Mounting hardware not included. We do have third party wall mounts available separately that can work with them. Also, we have two pairs of our matching Focal "Hop" stands include mounting hardware to mount a pair of these Sib XL's to the stands.
Polk Audio Monitor 50Polk Audio 3 Driver Tower Speakers with good bass response for their compact size.
Get big tower sound at an affordable price. The high-performance Monitor 50, features Polk's famous Dynamic Balance® drivers — a 1" dome tweeter and dual 5-1/4" woofers dish out rich, vibrant sound all across the audio spectrum. Get a pair for pristine reproduction of stereo music, or make this impressive tower speaker an integral part of a voice-matched Monitor home theater setup, either as a front or a surround speaker.
The Monitor 50 is constructed with non-resonant MDF, and includes front-to-back and side-to-side internal bracings for cleaner, clearer, more lifelike sound. Bold, fat stabilizer feet keep this tall, slender tower speaker steady on carpet or hardwood floors. And dual 5-way binding posts allow for bi-wiring or bi-amping.
Bass-reflex design (Front ported for versatile placement)
Frequency response 57-24,000 Hz (-3dB)
8-ohm impedance
Sensitivity 89 dB
Handles up to 150 watts
Dual 5-way binding post terminals
Black oak vinyl finish
Dimensions: 8-1/8"W x 36-1/4"H x 10-3/4"D
These Polk Monitor 50's perform very well for this price point. We normally list this model for $295, but this pair is only "Fair" cosmetically (drivers are all perfect), so we have discounted them down to $245.
Advance Model A5 - 120 Watts at 8 Ohms, 37.5" x 14" x 10.5"$195.00
Sinclair Sculptura Series AV2Attractive Sinclair Sculptura Series Slim Towers: 2-WAY, 3-Drive Dual 3" Loudspeakers
The versatile Sculptura AV2 tower is more than strong and dynamic enough to be used as a main channel but is also timbre matched to serve as the ultimate surround channel in a system anchored by larger Sinclair Speakers.
Woofers: Dual 3” Fusion Drivers
Tweeter: 1" Clarity Soft Dome
Impedance: 8 ohms
Sensitivity: 90dB
Power Handling: 100 Watts
Frequency Response: 85Hz-20kHz
Dimensions HxWxD (inches): 41” x 11.5” x 11” (with base), Dimensions HxWxD (mm): 1042 x 292 x 280mm (with base)
MSRP of $449, asking just $195 for the pair.

Vintage 3-Way Audiosphere Research Tower Speakers SP-803Vintage 3-Way Audiosphere Research Tower Speakers, Made in Canada
These 80's vintage floor standers were entry level when new, but have stood the test of time surprisingly well, and today offer good budget performance in a compact form-factor.
Driver Complement: 8" Woofer, 5" Midrange, 2.5" Tweeter
System: Bass Reflex
Protection: Circuit Breaker
Operative Power Range: 5 - 90 Watts
Recommended Amplifier Power: 5 - 50 Watts RMS
Frequency Response: 28 - 20,000 Hz
Crossover Frequency: 2000 & 6000 Hz
Impedance: 8 Ohms
Dimensions: 32" H x 10.5" W x 8.75" D.
Asking just $145 for these vintage, made in Canada floor-standers working perfectly and in very good condition.
Sony SS-C240Clean Pair of Budget Sony 3-Way Tower Speakers, made in Canada
Rated to handle up to 200 Watts at 8 Ohms Impedance

Dimensions: 13.5 x 9 x 35 inches, Weight: 24lbs each

Asking $145 for these decent sounding Sony 3-Way Floor-Standers in very good condition.
Realistic Optimus T-70(Cabinet Damage)$125.00