Audio/Video Receivers

49 AVRs Available

Last Update:

12/10/2024

ModelDescriptionPrice






Loaded Pioneer Elite 9.2 AVR 140 WPC, 8 x 4K HDMI 4 Zn! SC-68Loaded Pioneer Elite 9.2 AVR 140 WPC, 8 x 4K HDMI, 4 Zones! 11.2 Pre-Outs
32-bit asynchronous USB DAC • D3 Class D amplification • All the Apple trimmings • THX Certified: Ultra2 Plus
The SC-68, scion of Pioneer's upper-crust Elite line, uses a new generation of switching amplification Pioneer calls D3. And its feature roster is as long as a mobster’s rap sheet. It has virtually everything a receiver could possibly have, plus a few things no one but Pioneer has, such as AIR Studios Monitor Certification.
Perhaps most impressively, this receiver’s USB DAC, which can accept direct input from a computer, essentially turning the receiver into a 32-bit, 192-kilohertz, asynchronous, jitter-busting, digital-to-analog conversion machine, one that can turn a chaotically clocked bitstream into something musical. In theory, this might put Pioneer in the same category as the high-end USB component-DAC makers.
Now, computers tend to make lousy audio sources. They’re often so unsuitable for playback of high-resolution content that they practically negate the purpose of buying it. Besides being cumbersome objects, they tend to multitask, resulting in jitter— with audible timing errors in the bitstream. The receiver’s asynchronous DAC wrestles the clocking function away from the PC and cleans up the sound considerably. Even plain ol’ MP3s benefit—but what’s especially gratifying is that you can now use the computer to download lossless FLAC or uncompressed WAV files, play them on the computer itself, and hear the benefit of their higher resolution on your primary theater speakers. The DAC offers the option of requantizing 16-, 20-, and 24-bit material to 32 bits to achieve what the manual calls “smoother, more subtle musical expression.” Its digital filter can be set as follows: “slow (soft and warm), sharp (solid and tight), and short (quick and forward).” You can easily toggle these two functions on or off via remote buttons.
D3 is the third generation of Pioneer’s switching amplification strategy. Class D, in general, is more energy efficient than the Class AB used in most receivers because it dissipates less energy in the form of heat. Pioneer says D3 uses 44 percent less energy than its previous version of Class D, and 50 percent less than Class AB, while providing a wider dynamic range and supporting speaker impedances down to 4 ohms, even when more than one zone is operating.
The amp also benefits from a newly designed heat sink, discrete seven- and nine-channel inputs, and more direct signal paths, eliminating EMI filtering, feedback loops, impedance selectors, and current limiters. Pioneer says this reduces coloration, ringing, and noise, especially at high frequencies.
Just 7.25 inches tall, this 9.2-channel receiver is rated at 140 watts into 8 ohms with two channels driven. Surround is at heart a 5.1-channel medium, so you have two extra pairs of amp channels to play with, plus provision for a second sub. You might use the extra amp channels to run front-height and back-surround speakers simultaneously. But they have other potential uses, including biamplification of the front left/right channels and multiple zones. Mix and match to your heart’s content: This receiver will let you set up to 10 output configurations. And it facilitates multiple wiring schemes, with 11.2-channel preamp outs and 11 sets of binding posts. If you like having high def in more than one place, note that one of the four zones is associated with an HDMI output, another with component out, and two more with composite outs—so half the total is HD capable.

Want to get music from your smartphone or tablet into the receiver? Pioneer offers multiple wireless and wired paths. Prominent among them is Apple AirPlay. It’s oh so easy to use: Just enable Network Standby in the GUI. But you’re not limited to that. Pioneer now supports the HTC Connect standard for music streaming from HTC One smartphones, pushing album art and metadata to the video display. This receiver accommodates MHL (Mobile High-definition Link)–compatible devices via the front-panel HDMI jack—and it’s noteworthy that MHL has at least the potential to offer better-than-CD resolution.
Via USB, the receiver supports FLAC, WAV, MP3, WMA, and various iPod formats. Via network, the list also includes LPCM. FLAC and WAV are both supported at 192 kHz. The front USB jack accepts direct dockless plug-in of all but the oldest iPads, iPhones, and iPods. Interestingly, in another industry first for AVRs, the USB jack also accepts the
DSD DFF files that give the Super Audio CD its high resolution. Legal DFF downloads are available from a few small music labels such as Blue Coast, Channel Classics, and 2L. It’s also possible to rip SACDs to DFF, FLAC, or WAV if you have the appropriate third-party software.
Specifications:
Audio Decoding:
Dolby: TrueHD, Digital, EX, Pro Logic II/IIx/IIz
DTS: DTS-HD MA, HRA, DTS, ES, 96/24, Neo: 6
Lossy File Formats: AAC, MP3, WMA
High-Res File Formats: FLAC, WAV
Streaming: Pandora, vTuner
Other: 12 DSP modes, Full Stage Surround Advance (Focus/Wide), Sound Retriever AIR, Auto Sound Retriever, Phones Surround
3D: Yes
THX Certified: Ultra2 Plus
Number of Amp Channels: 9
Rated Power (Watts Per Channel): 140 into 8 ohms, two channels driven
Specified Frequency Response: 5 Hz to 100 kHz, +1/–3 dB
Video Processing: Qdeo with 4K x 2K passthrough
Connections:
Inputs: Video: HDMI 1.4a (8), component video (3), composite video (5)
Audio: Coaxial digital (2), optical digital (2), analog stereo (5), 7.1-channel analog (1), phono (1),
Additional: Ethernet (1), USB (1), USB-DAC in (1), Sirius (1), AM (1), FM (1), IR remote (2) Accessory: Wi-Fi adapter port (1), Bluetooth adapter port (1)
Outputs: Video: HDMI 1.4a (3), component video (2), composite video (3)
Audio: Optical digital (1), 11.2-channel pre out (1), analog stereo (2), subwoofer (Z2), 0.25-inch headphone
Additional: RS-232 (1), IR remote (1), RF remote extension (1), 12-volt trigger (2)
Dimensions (W x H x D, Inches): 17.13 x 7.25 x 17.38, Weight (Pounds): 39.2
Includes original Pioneer remote, and soft copy of manual in PDF. Retailed new for $2500 USD ~$3950 CND with HST. Asking just $895 CND for this extremely impressive Pioneer Elite SC-68, thoroughly tested and working perfectly.		$895.00


High Quality Cambridge Audio 600 Watt 6.1 AVR Azur 540R V2Fantastic sound, great looks, and Cambridge Audio Build Quality in a sleek, compact form factor. At this price point, It's hard to beat the performance of this Azur 540R v2 for your music / home theater system.
From Cambridge:
"The 540R V2.0 is designed to maximise multi-channel performance without compromising on stereo reproduction. As such, the six discrete amplifiers are kept as separate as possible from the processing
and input stages. An oversized power supply ensures that the 540R V2.0 can maintain a high power output into even difficult speaker loads to ensure a powerful and effortless sound.
For this V2.0 model we have fitted an improved volume control IC, larger PSU capacitors and made various improvements to the circuitry further elevating the sound quality of the unit. The Video switching has also
been completely re-designed to give higher bandwidth compatible with HDTV and the unit now features full On Screen Display.
A full range of digital and analog inputs are fitted to the 540R V2.0. Digital inputs allow for the connection of suitably equipped DVD players, satellite boxes and games consoles for decoding into stereo or digital
surround formats. Conventional analog stereo inputs allow the connection of CD players and the like to ensure the best possible stereo reproduction. The 540R V2.0 is also capable of decoding analog stereo
sources in Dolby Pro Logic® II and DTS Neo:6, for a convincing and effective surround experience from an analog source.
All this proprietary engineering is housed within our low resonance, acoustically damped chassis. An Azur Navigator remote control is also provided, giving full remote control of your AV receiver in an attractive
and easy to use handset."
6 x 100 Watt per channel @ 8 Ohms impedance
Dimensions (W x D x H) 350 x 430 x 150, Weight 15.8kg
Includes soft copy of manual in PDF.
Asking $345 for this beautifully designed, high fidelity AVR from Cambridge Audio.

$345.00




Pioneer Elite 500 Watt 5.1 AVR with Phono VSX-26TXPioneer Elite VSX-26TX 500 Watt 5.1 AVR with Phono
This Heavy, high quality Pioneer Elite AVR incorporates 5 independent 100 watt built in power amplifiers, all with high-performance Hex power MOS FET output transistors. This construction provides improved linearity and accurate reproduction of each channel for true high fidelity reproduction from even the most demanding Dolby Digital and DTS program
sources.
True Home Cinema with THX® Certification
The HOME THX CINEMA surround mode employs special processing to allow you to enjoy movie soundtracks with the same level of power and realism you experience in well designed movie theaters. You can enjoy this effect with both Dolby Digital, Dolby Surround and DTS sources.
The VSX-26TX boasts a full set of 5.1 Pre-Outs, 5.1 Pre-Ins, 4 Digital Inputs, 7 pairs of analog inputs plus a dedicated Phono stage, and of course, beefy Pioneer Elite 5-Way bindings for all speaker outputs.
Other features include switchable impedance, midnight mode for late night listening, multi-room / multi-source operation, dimmable display, direct mode, and button concealing Pioneer Elite Front panel.
Specifications:
Power output: 100 watts per channel into 8Ω (stereo)
Surround output: 100W (front), 100W (center), 100W (rear)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 0.09%
Input sensitivity: 4.7mV (MM), 335mV (line)
Signal to noise ratio: 80dB (MM), 101dB (line)
Output: 335mV (line)
Video Connections: composite
Dimensions: 420 x 173 x 470mm, Weight: 14.1kg (31 lbs)
Includes Pioneer Remote and soft copy of manual in PDF. Asking just $345 for this high fidelity Pioneer Elite 5.1 AVR with Phono, in very good condition.		$345.00


High-End Yamaha 630 Watt 7.2 AVR 6 x 4K HDMI, 2 Zn RX-V673High-End Yamaha 630 Watt 7.2 AVR 6 x 4K HDMI, 2 Zone.
Past Winner of What HiFi Product of the Year award!
It's horror movie night. The unfolding scenes on your HDTV are palpable, like you're actually in the house with that ghost. Your ears are finely tuned for the least sound of movement. But your TV speakers are pitifully tuned to provide the least sound of anything. Never fear. Yamaha's RX-V673 will have the very air around you crackling with sonic excitement. This high-def-friendly receiver comes loaded with the power and processing you need to transform your living room into a full-fledged home theater. You get seven channels of amplification plus the latest surround sound decoding — including Dolby® TrueHD and DTS-HD™ Master Audio — for an engulfing wraparound experience to deliver thrills and chills by the ton.
The right place to get connected
The 'V673 has HDMI inputs for connecting six high-definition video components. Plus the front-panel USB input is perfect for your iPod® or iPhone®. The 'V673's digital-to-analog converter takes over and Yamaha's Compressed Music Enhancer makes your selections sound superb. You'll even see your song titles on the front-panel display.
AirPlay® for ultra-convenient playback of iTunes®
Apple's AirPlay technology lets you stream music from your iTunes library directly to the receiver, either from a networked computer or right from your iPhone®, iPad®, or iPod touch®. Not only do you get a fast and convenient way to listen to your favorites, but anyone in your home can stream from their player to share their latest find.
Power and Processing:
7-channel amplifier
90 watts per channel into 8 ohms (20-20,000 Hz) at 0.09% THD, with 2 channels driven
Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio
Cinema DSP modes
Adaptive Dynamic Range Control keeps a lid on explosive sound effects for more discreet late-night listening
Silent Cinema for simulated surround sound using standard stereo headphones
Digital Music Options:
direct digital connection for iPod® or iPhone® through front-panel USB input bypasses the iPod's digital-to-analog converter for better sound
access Internet radio stations and digital streaming services (broadband connection required)
Compressed Music Enhancer for better sounding MP3s and other digital music files
built-in Apple AirPlay® for ultra-convenient iTunes® music playback
Ethernet port for music and JPEG streaming from a wired PC network
Wi-Fi®-ready with optional Yamaha adapter
DLNA (Digital Living Network Alliance) certified to ensure optimal compatibility with other network-enabled equipment
Multi-room Audio:
dual-room/dual-source output
powered and line-level stereo audio output for 2nd room (using powered 2nd-room output allows 5.1 home theater in main room)
only analog sources can be played in the 2nd room
Audio Performance Features:
192kHz/24-bit Burr-Brown digital-to-analog converters for all channels
back surround channels re-assignable to bi-amp compatible front speakers
direct mode switches off unnecessary circuitry to provide cleaner sound
Connections:
1080p-compatible HDMI digital video switching (6 in, 1 out) with 4K upscaling and 4K Pass-through
front panel HDMI connection for HD camcorders and cameras
HDMI version 1.4a with support for 3D video, Audio Return Channel, Deep Color, x.v.Color, auto lip-sync, and HDMI-CEC
analog and HDMI video upscaling to 1080p
Audio Return Channel function receives digital audio signals from a compatible HDTV's tuner via HDMI
component video switching (2 in, 1 out)
digital audio inputs: 2 optical and 2 coaxial
5 audio/video inputs with composite video (including 1 front-panel)
line-level outputs for two powered subwoofers
1 pair of main speaker outputs
General Features:
free Yamaha remote app lets you use your iPod touch®, iPhone® or Android™ device as a Wi-Fi® remote
four SCENE presets for easier source switching
easy to use on-screen display (via HDMI only)
HDMI standby pass-through allows HDMI switching without powering up receiver
40 AM/FM presets
Dimensions: 17-1/8"W x 6-3/4"H x 14-5/8"D, weight: 22.5 lbs.
Includes Yamaha remote and soft copy of manual in PDF. Retailed new for $650 USD ~ $1029 CND with HST. Asking just $345 for this well equipped Yamaha 7.2 AVR.		$345.00




Denon 735 Watt 7.1 AVR w/ 5 x HDMI, Phono AVR-2310CIDenon 735 Watt 7.1 AVR with 5 x HDMI, Phono, Dual Room, Bi-Amping
Brains and brawn deliver enhanced home theater realism
Fill your home with rich, enveloping surround sound. Denon's versatile AVR-2310CI teams high-current power for seven speakers with sophisticated digital processing to deliver a riveting home theater experience. You get decoding for the superior high-resolution surround sound formats available with many newer Blu-ray players and discs.
Denon also included the very latest Dolby technology — Dolby® Pro Logic® IIz. This cool new processing lets you add an optional pair of front "height" speakers to create a larger soundstage with an expanded vertical dimension — an exciting sonic enhancement for movies and video games.
Versatile video connections and maximum picture quality
The '2310CI provides 1080p HDMI switching for your five best high-def video components. Analog-to-HDMI conversion lets you send all your video sources to an HDMI-capable TV using a single digital cable, simplifying hookup and maximizing picture quality for each source. The receiver's high-performance Anchor Bay VRS™ video processor delivers superior video scaling and deinterlacing — it can upconvert all your video sources to resolutions as high as 1080p. You'll see improved detail and cleaner images from all your video components.
Flexible entertainment options
Dual-room/dual-source audio capability lets you enjoy home theater in your main room while a housemate enjoys stereo music in a second room. You can integrate your iPod® by adding one of Denon's control docks, and tune in to SIRIUS Satellite radio with the addition of an optional SiriusConnect™ home tuner kit. And if you've recently discovered — or would like to rediscover — the sonic bliss of vinyl records, the AVR-2310CI includes a phono input.
Product highlights:
105 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD
Dolby® TrueHD, DTS-HD™ Master Audio, Dolby® Digital Plus, DTS-HD™ High Resolution Audio, Dolby® Digital EX, DTS-ES™, Pro Logic® IIx, Pro Logic® IIz and DTS Neo:6 decoding
Compressed Audio Restorer for better sound with compressed music sources
Audyssey Dynamic Volume mode to keep listening levels steady
Audyssey Dynamic EQ™ for fuller sound at lower listening levels
dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room)
Pure Direct modes switch off all unused circuitry for the cleanest possible sound
on-screen GUI (Graphical User Interface) superimposed on HDMI output (up to 1080p)
multibrand A/V remote
Connections:
1080p-compatible HDMI switching: 5 in, 1 out
analog-to-HDMI video upconversion (up to 1080p/24/60 output via HDMI) with Anchor Bay Technologies VRS advanced video processing and scaling
HDMI version 1.3a with support for Deep Color, x.v.Color, lip-sync, 1080/24p video, 7.1 uncompressed 24/96 audio, DVD-Audio, and HDMI-CEC with compatible video sources and TVs
HDMI-to-HDMI video conversion with scaling up to 1080p resolution
component video switching: 2 in, 1 out
component video conversion (composite to S-video, or composite and S-video to component)
digital audio inputs: 3 optical (including 1 front-panel), 2 coaxial
digital audio outputs: 1 optical
3 audio/video inputs, including:
1 front-panel input with composite and S-video
2 rear-panel inputs with composite and S-video
2 audio-only inputs (including phono)
7.1-channel analog audio preamp input
RS-232C port for automated control systems
detachable power cord
2 switched AC outlets
2 sets of main speaker outputs
back surround speaker channels re-assignable for bi-amping front left and right speakers
17-1/8"W x 6-3/4"H x 16-1/"D, weight: 24 lbs.
Includes Denon Remote, Denon Calibration Mic, Printed manual, and soft copy of manual in PDF.
Asking just $325 for this versatile, good quality Denon AVR, perfect for both home theater and music applications.		$325.00


High Quality Denon 400 Watt 5.1 AVR w/ Phono AVR-3200High Quality Denon 400 Watt 5.1 AVR with Phono. New MSRP on this one was $1200 USD ~ $1850 CND with HST.
This is one of those early high-end surround sound AVR's, making it a perfect candidate for a double duty system with excellent audiophile quality sound for your music listening, and competent 5.1 surround functionality.
If you're looking for "bleeding edge" Atmos/Bluetooth/WiFi in your AVR, then best to look at one of our many other in-stock options (we can also supply you with brand new Denon and Marantz AVR's for *very* competitive prices.)
However if you're looking for excellent fidelity for your music, coupled with solid 5.1 home theater performance, this could be the perfect solution for you; particularly if you value (as we do) rotary bass & treble controls on the front of your amplifier, and a built in Phono-stage. As an added bonus, this 1998 model is also quite a bit easier to configure than many newer offerings.
Dimensions: Dimensions: 434 x 161 x 416mm, Weight: 14.8kg (32.5 lbs)
Includes original Denon Remote, and soft copy of manual in PDF. Asking just $295 for this very well built Denon 5.1 AVR.		$295.00






Full Digital Path! Harman Kardon 350 Watt 7.1 AVR DPR-1001Leave it to Harman Kardon to develop a groundbreaking full digital path receiver.
The DPR 1001 takes you boldly forward into the future of A/V entertainment — audio signals from DVDs and CDs remain in the digital domain from disc to digital amplifier! With no A/D and D/A conversion in the interim, extremely rigorous standards of signal purity are maintained, for an ultra-faithful re-creation of the cinematic or musical experience in your living room.
Best of all, you don't sacrifice an iota of home theater versatility or convenience in exchange for this innovative design. You get a full arsenal of surround decoding, including Dolby® Digital EX, DTS-ES® and Pro Logic™ II. H/K's Logic 7 Cinema and Music modes let you transform any stereo or Dolby Surround source into convincing 7.1-channel sound. Dual-room/dual-source capability lets you enjoy 5.1 surround sound in your main listening room, while simultaneously powering a pair of speakers in another room, so a housemate can enjoy a different stereo audio source! A separate remote is included for second-room use.
This receiver's all-digital amplifier section drives your home theater with 50 full-bandwidth-rated watts x 7 channels of ultra-clean power. While 50 watts per channel might pale on paper next to the power ratings of conventional receivers, once you hear the DPR 1001 in action, you'll be blown away by the purity and precision its all-digital design makes possible.
For precise control over your sound you get exclusive H/K technologies like the Triple X-Over system. This lets you set individual crossover points for each of three sets of speakers: front L/R, center channel, and surrounds (side L/R and back L/R). You can even assign unique Triple X-Over settings to each input source. The DPR 1001's multichannel digital bass manager, another H/K first, digitizes the direct analog input from an SACD or DVD-Audio player. This lets you apply Triple X-Over settings to these high-resolution signals, protecting your smaller speakers from potentially damaging low frequencies, and redirecting these room-shaking lows to your subwoofer. Two great features for anyone who's surround speaker system doesn't consist of 5 to 7 identical speakers!
The DPR 1001 features MP3 decoding for use with H/K's DAL 150 or other components that can send an MP3 bitstream through an optical or coaxial digital connection. Its back panel offers plenty of inputs and outputs for connecting all your sources, including HDTV-compatible component video switching for 2 sources. For easy connectivity with camcorders and portable audio devices, the front panel offers a switchable A/V input/output (with S-video), a switchable coaxial digital input/output, and an optical input.
The learning/multibrand EzSet™ remote features a built-in SPL sensor that lets it automatically balance the levels of your home theater speakers for optimum sound at your favorite seat. It also offers programmable macros and an LCD for handy control of your entire A/V system. And check out the DPR 1001's unique, handsomely sleek black and silver exterior!
Details:
PWM digital amplifiers
full digital path from input to amplifier
50 x 7 into 8 ohms (20-20,000 Hz) at 0.15% THD
Dolby Digital EX, DTS-ES, and Pro Logic II decoding
DTS Neo:6 modes
5.1 and 7.1-channel Logic 7 Cinema and Music modes
learning/multibrand EzSet LCD remote with macros
dual-room/dual-source output (speaker-level stereo audio output for 2nd room)
separate A/V remote for 2nd room
Triple X-Over system
multichannel digital bass management
MP3 decoding (for use with gear that can send MP3 via an optical or coax digital connection)
192kHz/24-bit DACs
7.1-channel input
7.1-channel preamp out
component video switching: 2 in, 1 out (30MHz bandwidth)
front-panel A/V with S-video input/output (switchable)
front-panel digital jacks: 1 optical in, 1 coaxial input/output (switchable)
back-panel digital inputs: 2 optical, 2 coaxial
back-panel digital outputs: 1 optical, 1 coaxial
2 audio, 5 A/V (including 5 S-video and 1 front-panel) inputs
on-screen display (requires TV with direct video input)
30 AM/FM presets
1 set of main speaker outputs
Dimensions: 17-3/4"W x 4-3/4"H x 20-1/4"D
Includes Harman Kardon Remote, and soft copy of manual in PDF. Retailed new for $1200 USD.
Asking just $295 for this impressive HK with full digital path implementation.		$295.00


High Quality NAD 250 Watt 5.1 Receiver w/ Remote AVR T744The NAD T744 is heir to many generations of award winning NAD designs.
This exceptional pedigree is evident in both the look and the feel of the T744, and it is unmistakable the moment you listen. Based on the highly successful T743, the T744 boasts improvements in virtually every area of the receiver, for a cumulative effect that is fully deserving of the new model number. Starting with a revised internal layout and connectors, selected DACs and other key components further reduces noise and distortion. Finally, we have converted to lead-free solder and components for a cleaner environment.
The T744 offers remarkable performance and flexibility in a compact and simple to operate package. This multi-channel powerhouse will bring your favorite music and movies to life in your home entertainment room with an absolute minimum of fuss and a maximum of pure enjoyment.
T744 A/V Receiver Features:
5 x 50W Minimum Continuous Power into 4/8O, all channels driven simultaneously (20Hz – 20kHz, with <0.08% THD)
105W, 145W, 165W IHF Dynamic Power into 8, 4 and 2 ohms
Dolby Digital, DTS, ProLogic II (Movies and music), EARS and Stereo Enhanced Surround Modes
5 A/V Custom Presets store unique speaker level and tone control settings
Direct speaker level adjustment for surround, center and sub.
NAD Soft Clipping™
6 A/V Inputs, 3 with S-Video, 2 full tape loops
Component Video on 2 Inputs and 1 Output, HDTV Compatible
2 Audio inputs, 1 tape out
6 Digital Inputs, 4 Coaxial, 2 TOS Link freely assignable
5.1 Analogue Input (for DVD Audio)
Speaker A + B switching (Speakers B stereo only)
IR input, 2 x IR outputs, 2 x 12V output triggers, 1 x 12V input
Preamp Outputs for all 5.2 channels (2 Subwoofers)
Amplifier Input for 3 amplifier channels
RDS FM/AM Tuner with 30 direct access presets
Includes NAD Remote Control and soft copy of manual in PDF.
Originally retailed for $799 USD. Asking just $295 for this quality NAD 5.1 Receiver		$295.00


Impressive 3-Zn Yamaha 770 Watt 7.1 AVR w/Phono RX-V1400The RX-V1400 is a top-grade receiver that will provide all the power and control necessary for any high quality home theater system.
It boasts 110 "true" Watts per channel, 3 Zones, and a Phono input, so ideal for music/movie hybrid applications.
Other major features include 7-channel discrete amplification (110W x 7), Yamaha's Digital ToP-ART design concept, Quad-Field CINEMA DSP, 31 surround programs including 2 THX programs, full movie sound format compatibility such as Dolby Pro Logic IIx, SILENT CINEMA, Night Listening Mode, and component video up conversion for optimum video quality.
Features for convenient operation include extensive menus, front panel Video Aux optical input terminal, Zone 2 and Zone 3 outputs for custom installation, 9-channel speaker output terminals and Speaker A/B and A+B selection.
This high end Yamaha boasts an impressive 7 Digital inputs (4 x Optical, 3 x Coaxial), 2 Digital Outputs (Optical), a quality Phono Stage, 5.1 Analog Inputs, 7.1 Pre-outs and a plethora of excellent features.
Originally Retailed for $1300, asking just $295 for this high-quality Yamaha AVR. Includes Yamaha remote and soft copy of manual in PDF.		$295.00


Marantz 500 Watt 5.1 AVR Made in Japan SR7000The Marantz SR7000 MADE IN JAPAN, is designed from the ground up in consultation with custom installers.
It incorporates advanced digital technologies including 24-bit/96kHz audio capability for exceptional multi-channel movie soundtrack and music reproduction.
In addition to its superb surround sound quality, the SR7000 offers outstanding operational flexibility, with an extensive complement of performance and convenience features. "This was by far the most musical A/V receiver I’ve ever heard. Track after track, I noted a very open and transparent soundstage. The SR7000 didn’t seem to taint the sound like other integrated receivers do; Offers outstanding flexibility for virtually any system one could think up." - Clint Walker, Home Theater Magazine
FEATURES
• Dolby Digital, DTS surround sound decoding plus Dolby Pro Logic I decoding and a variety of additional surround modes
• 96kHz/24-bit D/A converters provide the highest possible fidelity
• 100 watts (into 8 ohms) into each of the five main channels
• Wide variety of digital and analog audio and video inputs, outputs and switching facilities including S-video switching, front-panel A/V inputs and five digital inputs
• Precision AM/FM tuner with 50-station preset memory and auto preset tuning
• Multi-room operation provides control of a second zone audio/video system
• Six-channel direct inputs and six-channel preamp outputs
• Programmable learning remote control
• Fluorescent front panel display and user friendly on-screen menu system
• Headphone jack
• AC convenience outlets
• D-BUS remote connection
• Dimensions: 6.25" h. x 17.25" w. x 18" d., • Weight: 30.5 lbs.
Includes original Marantz "Learning" Remote, and soft copy of manual in PDF. MSRP of $800+ Great deal for just $245 for this made in Japan Marantz AVR.		$245.00




Yamaha 500 Watt 5.1 AVR w/ Phono, Pre-Outs, Main-Ins RX-V1000Yamaha 500 Watt 5.1 AVR w/ Phono, Pre-Outs, Main-Ins
Versatile, audiophile grade Yamaha model, perfect for double duty in a budget music + home theater system.
Yamaha RX-V1000 is a 5-channel receiver providing the finest performance and processing available for music and video sound. 5 channels are: L/R Main, Front Ctr, L / R Rear Effects. It has a pre-out for Rear Center to deliver the newest 6-channel formats Dolby Digital Matrix 6.1 and DTS ES. Features Yamaha's Digital Sound Field Processing, Cinema DSP, Tri-Field Processing, still very popular Dolby Surround Pro Logic, Dolby Digital processing, Digital ToP-ART design for signal integrity. It is compatible with Panja and Crestron for easy set-up. Yamaha's Digital ToP-ART, the Total Purity Audio Reproduction design philosophy maximizes digital quality and minimizes analog circuitry. Specifics include high performance digital circuitry using 24-bit DACs for all output channels, a digitally regulated volume control, processor direct switch, high density Cinema DSP circuitry, utilizing Yamaha's 32-bit YS-928 LSI, two decoding LSIs, and low impedance drive amplifier featuring superior power transistors and gigantic heat sink. Yamaha's exclusive Tri-Field Processing, which applies Digital Sound Field Processing technology to Dolby digital and DTS, creates a true movie theater experience in the home. It develops independent enhanced sound fields for the front signals as well as for left and right surround. Great for casual listening and parties, Yamaha's All-Channel stereo puts music through all speakers in the system and maintains stereo imaging.
Key Features
Channels 5.1
Output Power 500 Watt
Amplifier Output Details 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.04% - 2 channel(s) ( main ), 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.04% - 2 channel(s) ( rear ), 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.04% - 2 channel(s) ( surround ), 100 Watt - 8 Ohm - 20 - 22000 Hz - THD 0.04% - 1 channel(s) ( center )
Sound Effects BASS EXTENSION
Surround Sound Effects Digital Cinema Sound Virtual 3D, Virtual CINEMA DSP
Sound Output Type Surround Sound
HDMI No
Built-in Decoders DTS-ES decoder, Dolby Digital, Dolby Digital Matrix 6.1, Dolby Pro Logic
Receiver Tuner Type Digital
Receiver Tuner Bands AM/FM
Response Bandwidth 10 - 100000 Hz
Connectivity
Connectors Type 1 X AM Tuner Antenna input - rear, 1 X Component output - rear, 1 X Composite (Video) output - rear, 1 X Digital Optical input - front, 1 X FM Tuner Antenna input - rear, 1 X Headphones output - front, 1 X Multichannel Analog Audio input - rear, 1 X RCA (2 Audio Channels) input - front, 1 X S-Video input - front, 1 x AM antenna ( click-fit x 2 ) - rear, 1 x FM antenna ( F connector ) - rear, 2 X Analog Audio output - rear, 2 X Component input - rear, 2 X Digital Coaxial input - rear, 2 X Digital Optical output - rear, 3 X RCA (2 Audio Channels) output - rear, 3 X S-Video output - rear, 3 x composite video/audio output ( RCA phono x 3 ) - rear, 4 X Analog Audio input - rear, 4 X Digital Optical input - rear, 5 X RCA (2 Audio Channels) input - rear, 5 X S-Video input - rear
Coaxial Digital Input Yes
Optical Digital Input Yes
Optical Digital Output Yes
Headphone Jack Yes
Dimensions: Height 6.73 in., Width 17.13 in., Length 15.39., Weight 33.07 lb.
Includes Yamaha Remote and soft copy of manual in PDF. Asking just $245 for this versatile, audiophile grade AVR with Phono and full set of pre-ins and main-outs.		$245.00
High Quality AMC 525 Watt 5.1 AVR R9Less common, high quality AMC 5.1 AVR.
Power output: 100 watts per channel into 8Ω (stereo), and 5 Channel Surround
Frequency response: 10Hz to 60kHz
Discrete Amplifier Design
4 x Assignable Digital Inputs: (2 Optical & 2 Coaxial Digital),
6-Ch Preamp Inputs & Outputs,
S-Video & Composite Video, On-Screen Display
Tone Direct mode, Very convenient rotary Bass, Treble, and Balance Controls, and direct Center, Sub, and Rear volume controls (great feature!)
AM/FM Stereo Quartz PLL digital Tuner with 30 Presets
Quality Binding post connectors for all speakers
Dimensions: 440 x 140 x 391mm, Weight: 11kg
MSRP of $699 USD, asking just $225 for this very good quality receiver.		$225.00


High Quality Yamaha 480 Watt 6.2 AVR w/ Phono RX-V992High Quality 30lb Yamaha 480 Watt 6.2 AVR good quality Phono stage.
Notable features include:
Dual Subwoofer Outputs, Impedance Selector, Full set of 6.2 pre-outs, Front mounted rotary Bass, Treble, and Balance Controls, 5-Way bindings suitable for banana plugs for all speaker outputs. 3 x Digital Inputs (1 x Optical, 2 x Coaxial)
Power output: 80 watts per channel into 8Ω (stereo)
Surround output: 80W (front), 80W (center), 80W (rear), 80 W (rear center)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.025%
Damping factor: 160
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 86dB (MM), 96dB (line)
Channel separation: 55dB (MM), 45dB (line)
Output: 150mV (line), 2.6V (Pre out)
Speaker load impedance: 4Ω (minimum)
Digital inputs: coaxial, optical
Video Connections: composite, SVHS
Dimensions: 435 x 171 x 391mm, Weight: 13.8kg, 30.5 lbs
Includes Yamaha remote, soft copy of manual in PDF.
Retailed new for $999 USD! Asking just $225 for this heavy, great sounding Yamaha AVR w/ good power and phono stage, perfect for double duty home theater / music applications.		$225.00




Denon 375 Watt 5.1 AVR with 4 x HDMI, ARC AVR-591Denon 375 Watt 5.1 AVR with 4 x HDMI and ARC
Denon AVR-591: 5.1-Channel AV Receiver with Advanced Features and 4 x HDMI inputs.
The Denon AVR-591 is a versatile and feature-rich 5.1-channel AV receiver that offers exceptional value for home theater enthusiasts. This model combines robust power output with advanced audio processing capabilities, making it an ideal choice for those seeking high-quality surround sound performance.
The AVR-591 boasts a true 75 watts per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD), providing ample power to drive most speaker systems effectively. Its 5.1-channel configuration is perfect for creating an immersive audio experience in small to medium-sized rooms.
Key features of the Denon AVR-591 include:
• 4 HDMI 1.4a inputs, ensuring compatibility with 3D content and various broadcast formats
• Decoding of high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio
• Audyssey MultEQ room calibration technology for optimized sound performance
• HDMI video upconversion, allowing for a true one-cable solution
• On-screen display via HDMI for easy setup and configuration
• Pre Outs for Dolby ProLogic IIz height channels or Surround Back speakers
• iPod compatibility (with optional dock)
The AVR-591 incorporates Analog Devices 24-bit/192 kHz DACs, ensuring high-quality digital-to-analog conversion for your audio sources. It also features Audyssey Dynamic Volume and Dynamic EQ technologies, which help maintain consistent volume levels and tonal balance across various content.
For music lovers, the receiver's ability to work seamlessly with devices like the Logitech Squeezebox Touch makes it an excellent choice for streaming high-fidelity audio.
Dimensions: (Width x Height x Depth) 435 x 161 x 379 mm (17.1 x 6.3 x 14.9 inches), Weight: 9.8 kg (21.6 lbs)
The Denon AVR-591 offers an impressive array of features and performance at an attractive price point. Whether you're building a new home theater system or upgrading your existing setup, this receiver delivers powerful, high-quality audio that will enhance your entertainment experience. Don't miss the opportunity to own this versatile AV receiver.
Includes Denon Remote, Calibration Mic and original Box. Asking just $195 for this very competent Denon 5.1 AVR.		$195.00


Denon 540 Watt 6.1 AVR w/ 2nd Zone & Phono AVR-2802Denon 540 Watt 6.1 AVR with 2nd Zone, Phono, & Remote
Perfect, high quality component for pulling double duty between home theater and stereo music roles.
Every time you watch a DVD, or listen to your favorite music, the AVR-2802 can make it a 6.1-channel, 360º surround sound experience! It has built-in decoding for DTS-ES Discrete 6.1 and DTS-ES Matrix 6.1 encoded sources, plus DTS Neo:6 modes for turning stereo music and Dolby soundtracks into full 6.1-channel audio.
Denon's high-current amplification with 90 full-bandwidth-rated watts x 6 channels (front left/center/rear, surround left/rear, and back surround) drives your speakers with clarity and authority. The impressive back-panel lets you hook up 4 digital audio, 3 analog audio, and 5 A/V components, plus 2 sources with component video output and a 5.1 audio source like DVD-Audio.
Cinema EQ corrects movie soundtracks for home theater-sized rooms. And dual-room/dual-source capability lets you thrill to 6.1-channel sound in your main listening room while a housemate enjoys a different stereo source in another.
Details:
90 watts x 6 into 8 ohms (20-20k Hz) at 0.05% THD
DTS-ES, Dolby Digital, and Dolby Pro Logic II decoding
DTS Neo:6 modes
dual-room/dual-source output (preamp outputs for second room)
digital inputs: 3 optical, 1 coax
optical digital output
component video switching: 2 in, 1 out (27MHz bandwidth)
3 audio (including phono) and 5 A/V (including 5 S-video) inputs
5.1-channel input
7.1-channel preamp output
on-screen display (requires TV with direct video input)
variable low-pass crossover
96kHz/24-bit D/A converters
high-current, low-impedance amp design
speaker binding posts for all channels
40 AM/FM presets
Dimensions: 17-1/8"W x 6-3/4"H x 16-15/16"D
Includes soft copy of manual in PDF and pre-programmed Universal Remote.
Listed new for $799 USD ~$1100 Cdn w/ taxes. Asking just $195 for this great quality Denon AVR in very good condition.		$195.00
Harman Kardon 150 Watt 5.1 AVR with HDMI AVR 146The AVR-146's sonic quality and sophisticated features make it an exceptional value. If A/V receivers are the heart of a home entertainment system, then Harman/Kardon AVRs are both heart and mind.
They take the vast array of audio/video formats and sources, and make it easy for you to select a source, tailor it to the requirements of your listening room and then play it back without skipping a beat.
It pumps 30 Watts of conservatively-rated power through each of its 5 channels, employing Logic 7 processing and EzSet/EQ technology to ensure that you always have crisp audio.
With two-input Simplay HD™-verified HDMI™ switching and a wealth of digital audio inputs, the AVR-146 lets you connect and command virtually any home theater source.
As with the tradition of Harman/Kardon's revered audio receivers, the AVR-146 features true high current capability, ultra wide-bandwidth amplifier design with low negative feedback and all-discrete amplifier circuitry. Dual independent power supplies, for front and surround channels ensure that the power is present. The surround processing is handled by 24-bit, Twin-core Cirrus Logic 49500 series DSP, Logic 7 processing, A/V Sync delay and 100MHz component video switching, the AVR-146 is high in performance.
Use the A/V sync delay to match the audio processing to the audio delay of digital displays. 6 Digital Inputs Dolby Digital EX & Surround Sound Dolby Pro Logic & II DTS & ES Front AV Jacks Headphone Jack High Current Subwoofer Preamp Outputs 7 Device, Pre-Programmed Remote Control 4 Inputs, 2 Outputs S-Video Dimensions -
Dimensions: Width 44 x Height 15 x Depth 35 cm Weight - 10 kg / 22lbs
Includes original HK Remote Control, and soft copy of user manual in PDF.
Asking just $195 for this good quality Harman Kardon AVR.		$195.00
NAD T 751Grey, 70 WPC AVR$195.00


Sony ES 260 Watt 5.1 Receiver with Phono STR-GX700ESSony Elevated Standard Series 5.1 Receiver. In addition to the usual higher fidelity amplification found in Sony's ES series, the STR-GX700ES also offers a good quality Phono Stage, and switchable impedance for the mains.
This Sony also boasts no less than 8 additional pairs of RCA inputs (4 pairs with output loops), decent AM/FM Stereo Tuner, and a full-range stereo pre-out that can be used for a subwoofer with its own crossover.
While the STR-GX700ES may be of limited use as a surround sound receiver due to its somewhat dated technology in that area, it does offer excellent sound quality and more than adequate power for most applications.
Fantastic choice for driving a primary music system with light duty home theater duty.
Specifications:
Power output: 70 watts per channel into 8Ω (stereo)
Surround output: 70W (front), 70W (center), 25W (rear)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.15%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 300mV (line)
Signal to noise ratio: 75dB (MM), 82dB (line)
Dimensions: 430 x 148 x 365mm, Weight: 10kg, 22 lbs
Includes soft copy of manual in PDF, and 3rd Party pre-programmed universal remote.
Asking $195 for this great sounding Sony ES Receiver.		$195.00


Denon 595 Watt 7.1 AVR w/ 2nd Zone AVR-1906The AVR-1906 not only delivers great home theater sound, but also offers plenty of convenience features that make your entertainment system easy to use and enjoy.
Denon's acclaimed high-current amplification drives up to 7 home theater speakers with power and precision. And thanks to a wealth of built-in surround decoding options, you can enjoy high-impact surround sound from virtually all of your movies, music, TV shows, and video games.
Component video conversion provides easier TV hookup and simpler switching between sources. All video signals can be passed from the '1906 to your TV via a single component video connection. That means you can switch from your cable box to your DVD player with the press of a single button on this receiver's remote — no more fumbling through input menus on your TV. Component video conversion also preserves the highest possible picture quality for each source.
An icon-based display appears on your TV screen, providing easy navigation of the '1906's control menus. And dual-room/dual-source capability lets you enjoy home theater in your main room while a housemate listens to music in another room — this receiver can even power stereo speakers in your second room.
85 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD
Dolby® Digital EX, DTS-ES®, DTS 96/24, Dolby Pro Logic® IIx, and DTS Neo:6 processing
192kHz/24-bit DACs
dual-room/dual-source output (powered and fixed line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room)
component video conversion
on-screen display
digital inputs: 3 optical (including one front-panel), 2 coaxial
optical digital output
component video switching: 3 in, 1 out (100MHz bandwidth)
3 audio and 4 audio/video (including 3 S-video and one front-panel) inputs
5.1-channel preamp input for connecting an Super Audio CD (SACD) or DVD-Audio player
7.1-channel preamp output for system expansion
High-current, low-impedance amplifier design
56 AM/FM presets
2 sets of main speaker outputs
Dimensions: 17-1/8"W x 5-3/4"H x 17-5/16"D
Asking just $175 for this great sounding 7.1 AVR from Denon with handy powered second zone output.		$175.00




Harman Kardon 240 Watt 6.1 AVR w/ Remote AVR 135Harman Kardon's attractive AVR 135 6.1 audio/video surround receiver decodes an array of 5.1- and 6.1-channel surround formats, bringing you great sound from many sources.
The AVR 135 features a discrete-output amplifier that pumps 6 channels of high-current (+/-25 amps), ultrawide-bandwidth power: (conservatively rated) 6 x 40 watts into 8 ohms, 20 to 20,000 Hz with less than 0.07 percent THD. The receiver uses state-of-the-art 192 kHz/24-bit audio digital-to-analog converters and a high-power Cirrus 32-bit DSP processor for clear, dynamic presentations from music and movies.
Surround sound features include traditional Dolby Pro Logic, Dolby Digital 5.1, and DTS surround, including 6.1 DTS-ES Discrete, DTS-ES Matrix, and DTS Neo:6 (Cinema 6.1/5.1 and Music 6.1/5.1). You also get Harman's proprietary Logic 7 audio for enhanced multichannel reproduction from both matrix-encoded and 2-channel recordings.
As part of its broad video hookup options, the receiver offers wide-bandwidth, HDTV-compatible component-video inputs and an array of digital and analog audio connections, including three coaxial and two optical digital audio inputs and 1 of each type of digital output. It sports both analog and digital front-panel inputs, and 6-channel direct audio inputs to accommodate a DVD-Video, DVD-Audio, SACD, or universal player.
The AVR 135's cutting-edge technologies also include triple-crossover bass management and automatic digital input polling. Digital input polling is a Harman Kardon feature that detects whether the selected audio source is digital or analog in nature and automatically configures the receiver to provide the required audio output. This means you won't have to manually switch the receiver's input from digital to analog when changing from, say, an SACD-capable DVD player's coaxial digital output (for Dolby/DTS) and its multichannel analog outputs (to appreciate the SACD audio). You can switch the feature off when desired. (Awesome Feature!)
Triple-crossover bass-management system lets you choose from multiple crossover frequencies for the front L/R, center, surround L/R, and surround back L/R speakers. Most receivers and DVD players have far more limited crossover filtering or none at all. Moreover, you can set different speaker-size configurations for different AVR 135 input sources according to your needs.
You get a high-quality FM/AM tuner with 30 station presets and a Listener Preference System that lets you specify a surround mode according to the program source. You can also set speaker-channel levels for each program source and DSP format (for example, the sub-woofer level can be set differently for multichannel movie viewing and 2-channel CD music listening).
Measures 17.3 x 6.3 x 15 inches (W x H x D)
Includes Harman Kardon Remote, and soft copy of manual in PDF.
Asking $175 for this good quality Harman Kardon AVR.		$175.00
Harmon Kardon AVR130Black 450 Watts 5.1 AVR$145.00
JVC RX-552VBlack, 80 WPC at 8 Ohms$145.00


JVC 500 Watt 5.1 AVR RX-6020VBK500 Watt 5.1 Receiver from JVC includes High-Rigidity Z-Chassis, and 2 x Assignable Digital inputs.
100 watts x 2 min. RMS, both channels driven into 8 ohms from 40Hz to 20kHz with no more than 0.8% THD
100 watts x 5 min. RMS, into 8 ohms, 1kHz, 0.8% THD
Dolby Pro Logic II in Full Digital Processing
Dolby Digital and DTS decoders built-in for theater quality surround from digital sources
Fully Discrete Outputs to ensure greater fidelity and longer life
Digital Acoustics Processor (DAP) with 5 preset sound fields digitally recreates these venues in your own home.
Enhanced COMPU LINK Control System
Fluorescent Display
Line level Sub Out
5.1 in
2 Composite Video Inputs
2 Assignable Digital Inputs (1 Optical, 1 Coaxial) that you can designate to any digital source
2 Composite Video Outputs
2 Main Speaker Terminals
15 AM and 30 FM station memory
Dimensions: Weight: 19.0 lbs, Width: 17 3/16", Height: 5 13/16", Depth: 16 7/16"
This RX-6020VBK is in excellent condition, and includes an universal remote.
Asking just $145.		$145.00
JVC RX-662VBlack, 550 Watt 5.1 with Phono$145.00


Kenwood 500 Watt 5.1 AVR with Phono VR-507Kenwood 500 Watt 5.1 AVR with Phono
From Kenwood:
"A/V fans, get ready to cheer: Kenwood's VR-507 offers Dolby® Pro Logic II processing. Pro Logic II takes a giant step forward from Pro Logic's 4-channel format by creating a convincing 5.1-channel experience — with stereo, full-bandwidth surround channels — for Dolby Surround film soundtracks, and even stereo music sources. With over 12,000 Dolby-encoded movies, and limitless stereo music and TV broadcasts, there are lots of reasons to love Pro Logic II!
Of course you also get built-in Dolby® Digital and DTS® decoding to enjoy the multichannel digital sound on thousands of DVD movie soundtracks. 100 watts x 5 channels of power (with a frequency bandwidth of 20-20,000 Hz) and 24-bit digital signal processing ensure powerful, dynamic surround performance. And to expand your opportunities for surround sound fun, Circle Surround mode produces 5.1-channel sound from 2-channel sources.
This versatile receiver has plenty of inputs for all of your A/V gear: 4 digital inputs, 3 audio inputs (including one for a turntable), and 5 A/V inputs (including 5 S-video for high-resolution sources like DVD, S-VHS and DBS, plus a 5.1-channel input for formats like DVD-Audio). The VR-507 is ready to accommodate your home audio/video desires now and down the road!"
Details:
Dolby Digital, DTS, and Dolby Pro Logic II decoding
digital inputs: 2 optical, 2 coaxial
3 audio inputs (including phono), and 5 A/V inputs (including 5 S-video, 1 front-panel, and one 5.1-channel)
100 watts x 5 into 8 ohms (20-20,000 Hz) at 0.7% THD
24-bit DSP, A/D & D/A converters
5 audio DSP modes (Arena, Theater, Jazz Club, Stadium, Disco)
Circle Surround mode
Midnight Theater mode
preamp-level subwoofer output
2 sets of main speaker outputs
banana plug-compatible binding posts for front left/center/right speakers
multibrand A/V remote control
40 AM/FM presets
Dimensions: 17-3/8"W x 5-11/16"H x 16-1/2"D
Includes Kenwood Remote and printed manual. Asking $145 for this versatile Kenwood 5.1 AVR with decent power and a nice range of features for both home theater and music, including Phono input.		$145.00
Onkyo 275 Watt 5.1 AVR w/ Phono & Remote TX-DS494The handsome TX-DS494 pumps out a respectable 55 watts of high-current, FTC-rated, full-bandwidth power to each of the five channels - more than enough for a thrilling home-theater experience in most entertainment rooms.
It also offers an extensive list of features extremely rare in this price range:
low-impedance drive to handle higher quality speaker systems (testimony of high-grade parts and engineering excellence),
Phono input so you can connect your turntable,
three assignable digital inputs for setup flexibility,
a 100-kHz frequency response to support DVD-Audio,
heavy-duty dual-banana-plug compatible binding posts for all channels to deliver high-quality, loss-free speaker connection,
a 5.1 channel input to accommodate multichannel formats,
Dolby Pro Logic II to bring some of the excitement and spatial experience of Dolby Digital 5.1 to your stereo CDs & Dolby Surround material,
a brushed, anodized-aluminum front panel to ensure chassis rigidity,
world-renowned
Wide-Range Amplifier Technology (WRAT) to provide better delivery of momentary power peaks from all software, including regular CDs and analog sources,
and an intuitive "Easy-Set" feature to make speaker configuration swift, straightforward and simple.
All in all, it's an incredible features/performance package for this price.
Includes original Onkyo remote, and soft copy of manual in PDF.
Asking just $145		$145.00
Sony 600 Watt 6.1 AVR STR-K870PGreat power for your home theater with this 100 Watt per channel 6.1 AVR from Sony.
Featuring 5-Way Banana Plugs for the primary 6 speakers, plus spring clip connectors for the Front B Speakers.
Antenna Terminal(s): Yes (FM 75 ohm, AM Loop)
Composite Video Output(s): 2 (Rear)
Composite Video Input(s): 4 (1 Front/3 Rear)
RCA Audio Output(s): 2 (Rear)
Analog Audio Input(s): 3 (1 Front/2 Rear)
Subwoofer Output(s): 1 (Rear Pre-out)
Coaxial Audio Digital Input(s): 1 (Rear)
Optical Audio Input(s): 2 (Rear)
Station Preset(s): 10 AM/20 FM
Sound Mode: Dolby® Digital, dts®, Dolby® Pro
Logic® IIX, Dolby® Digital EX, dts® ES Neo 6
96/24 Decoding, Digital Cinema Sound™
Technology - Cinema Studio EX, A/V Sync
(simple)
Dimensions (WHD): Receiver Approx: 16-13/14" x 6-2/11" x 12-1/5"
Includes PDF soft copy of manual, and universal Remote.
Asking $145 for this nicely equipped Sony AVR.		$145.00
Yamaha HTR 5590Yamaha 600 Watt 6.1 AVR$145.00


Good Quality, Powerful Yamaha 630 Watt 6.1 AVR HTR-5750High powered Yamaha AVR in Silver finish, with above average sound quality and a good feature set, boasting 5.1 inputs, 4 x Digital inputs (3 x Optical, 1 x Coax), impedance switching, and 8 Pairs of Banana plug speaker outputs.
Other Features:
S-Video Up Conversion
HDTV (720p/1080i) Compatibility
Wide-Range Video Bandwidth (60MHz -3 dB)
Analog Mixdown
Direct Stereo Mode
Straight/Effect Switch
2-Channel Mode
High Dynamic Power, Low Impedance Drive Capability
Audio Delay for adjusting Lip Sinc (0-160ms)
29 Surround Programs (51 Variations)
Night Listening Enhancer (Cinema/Music) and SILENT CINEMA
Linear Damping
Wide-Range Audio Frequency Response for
DVD-Audio/SA-CD Compatibility
Subwoofer Output
Subwoofer Phase Select
Speaker A, B, and A+B Selection (Front L/R)
Easy Menu Setup (Basic Mode)
Program Name and Sound Field Indications
Center Graphic Equalizer
Virtual CINEMA DSP
Sleep Timer
Auto Preset Tuning
Digital ToP-ART
SILENT CINEMA and Virtual CINEMA DSP
Dimensions: 435 x 161 x 416mm / 17.13" x 6.38" x 16.38", Weight: 11 kg / 24 lbs. 4 oz.
Includes soft copy of manual in PDF, and pre-programmed Universal remote
Asking $145		$145.00


Yamaha 500 Watt 5.1 AVR w/ Remote HTR-6030Yamaha's HTR-6030 5.1 Channel Digital Home Theater Receiver is the heart of your new home theater system.
It can reliably support the performance of your HDTV with 5.1 channel surround sound and take your audio/video performance to an all-new level. Richer, more detailed audio is finally here with Dolby Digital, Dolby Pro Logic II, and DTS. Multiple component, S-Video, and fiber-optic inputs provide maximum flexibility. New SCENE buttons let you access every piece of your home theater system with the press of a button. It's also XM Ready, so you can get 150 channels of satellite radio through your 5.1 system. Cinema DSP Digital lets you feel every sound effect, while Silent Cinema and Virtual Cinema DSP lets you hear large-scale surround sound through ordinary headphones.
Product Description:
AV Receiver performance taken to a new level with high-end features including Yamaha's new SCENE. Compressed Music Enhancer, XM Ready with XM HD Surround, and front panel mini jack for portable audio players.
Product Features:
500 watts of total output power
Dolby Digital, Dolby Pro Logic II, and DTS decoding
3 HDTV-compatible component video inputs
XM-ready with XM HD Surround powered by Neural Surround
4 SCENE buttons offer easier operation
Product Dimensions: 12.5 x 17.1 x 5.9 inches ; 18.3 pounds
Asking just $145 for this well-equipped Yamaha AVR in very good condition.		$145.00


Yamaha 350 Watt 5.1 AVR with Remote RX-V595Yamaha 350 Watt 5.1 AVR with Remote RX-V595 High Quality Yamaha 350 Watt AVR with excellent feature set
5-CHANNEL H/T RECEIVER W/DOLBY DIGITAL,CINEMA DSP AND TRI-FIELD PROCESSING*
The RX-V595 is a 5-channel receiver providing Dolby Digital and Dolby Pro Logic processing and Yamaha's Digital Sound Field Processing, Cinema DSP, and Tri-Field Processing.
Yamaha's exclusive Tri-Field Processing which applies Digital Sound Field Processing technology to Dolby Digital and DTS to create a true movie theater experience in the home. It develops independent enhanced sound fields for the front signals as well as for left and right surround.
Discrete power transistors rather than IC chips are used in the amplifier section to provide the cleanest sound possible. The amp delivers 70 watts to all five channels.
Yamaha's YSS-908 chip provides Dolby Digital and Pro Logic with full channel separation and no front-to-back bleedthrough in addition to Music and Cinema DSP and Tri-Field Processing.
Yamaha's exclusive Digital Sound Field Processing for music recreates the acoustic personalities of actual concert halls and other venues, such as the Roxy Theatre in Los Angeles, Village Gate in New York, Anaheim Stadium, and concert halls and churches in Europe. Cinema DSP multiplies the effects of Dolby Pro Logic and Yamaha DSP to provide the best possible Pro Logic movie theater recreation in your home. Tri-Field Processing DSP does the same for Dolby Digital.
The RX-V595's rear panel has input jacks to accommodate an external 6-channel decoder. So the receiver is ready for any other 5.1 channel format, should one be developed.
The RX-V595 can accommodate two digital sources DVD/LD and CD. The DVD/LD input has both optical and coaxial digital connections.
AUTO PRIORITY INPUT SELECTION
When different input formats are connected from the same source, the RX-V595 automatically prioritizes them and selects PCM, and finally the analog input.
AUTO SOUND DECODER
The RX-V595 senses a Dolby Digital signal and will automatically switch the receiver to that mode when the signal is detected.
NEW YAMAHA UNIVERSAL REMOTE CONTROL
The advanced remote control with the RX-V595 has preset codes for most brands of VCRs, TVs, etc.
THREE AUDIO AND FOUR AUDIO/VIDEO INPUTS*
The RX-V595 is a versatile receiver incorporating three sets of audio-only inputs and four pairs of A/V inputs, including one set of A/V inputs on the front panel for fast and easy connection.
LOW IMPEDANCE DRIVE CAPABILITY AND IMPEDANCE SWITCHING
Yamaha's famed low impedance drive circuitry is included in this receiver so that it can handle virtually all loads and a wide variety of speakers. For further speaker matching, the receiver's back-panel switches can be set for either 4- or 8-ohm speakers.
The advantage of full range, 20 to 20,000 Hz, damping is that it improves the definition and resolution of the sound output throughout the audible frequency range.
A/B SPEAKER SELECTOR Allows selection of either a first set of speakers or a second -- or both.
SLEEP TIMER: Permits a delayed receiver turn off. You can set it for up to two hours in 30 minute increments.
40-STATION DIRECT ACCESS PRESET TUNING
Up to 40 preset AM and FM stations can be grouped in five groups of eight stations. These groupings make it easy for family members to easily access their favorite stations or to have musical genres, such as all the jazz stations, grouped together.
Yamaha's heavy-duty binding post speaker terminals accept banana plugs, spade connectors, and a variety of speaker wire, including heavy gauge cable.
Includes pre-programmed universal remote and soft copy of manual in PDF. Originally retailed for $499, asking just $145.		$145.00


Yamaha RX-V596Good Quality Yamaha 500 Watt 5.1 AVR with Phono
The RX-V596 is a solidly built audio/video receiver from the Yamaha company that is designed to be used in conjunction with speakers and subwoofers for high-quality home theater entertainment systems. Utilizing a five-channel design with 100-watts available per output, this model incorporates a number of "natural sound" technologies that help to achieve the highest possible quality audio signals.
These include Dolby Digital and DTS (Digital Theater Systems) decoding systems, as well as Dolby Pro Logic and Yamaha's DSP processors that include Cinema and Tri-field settings for an optimal audio experience. The DTS technology functions as a 5.1 system, handling content from common formats such as DVDs, CDs and other user-created laser discs.
24-bit digital-to-analog signal conversion ensures maximum potential quality from all possible inputs, and working with the unit's discrete power transistors to provide a clean, unhindered signal. Full-channel separation is achieved via Yamaha's IC chips, preventing front-to-back surround sound bleed for a richer, more authentic home theater experience.
The RX-V596 comes pre-loaded with 24 sound program presets and with AM/FM radio functionality allowing for up to 40 user-created presets. A/B speaker switching makes multi-system setup possible with one-button toggling, and low impedance drive switching makes the receiver functional with almost all standalone speaker and subwoofer models on the market. In addition, the unit features a sleep timer function for late-night energy conservation, programmable in half-hour increments up to two hours.
This Yamaha boasts a Phono input, three optical digital and two coaxial digital inputs, and subwoofer Pre-out, in addition to S-Video Handling.
Key Features
Channels 5.1
Channel Output Power 500 Watt
Amplifier Output Details 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.06% - 2 channel(s) ( main ), 100 Watt - 8 Ohm - 20 - 20000 Hz - THD 0.06% - 2 channel(s) ( surround ), 100 Watt - 8 Ohm - 20 - 22000 Hz - THD 0.06% - 1 channel(s) ( center )
Surround Sound Effects Digital Cinema Sound Virtual 3D
Sound Output Type Surround Sound
Built-in Decoders DTS, Dolby Digital, Dolby Pro Logic
Receiver Tuner Type Digital Receiver Tuner Bands AM/FM
Dimensions
Height 5.94 in. Width 17.13 in. Depth 15.4 in
Weight 24.69 lb.
Includes Yamaha Remote and soft copy of manual in PDF. Asking just $145.		$145.00
Harman Kardon 200 Watt 5.1 AVR w/ Remote AVR 120From Harman Kardon:
"The AVR 120 is among the most versatile and multi featured A/V receivers available, incorporating a wide range of listening options. In addition to Dolby Digital and DTS decoding for digital sources, a broad choice of analog surround modes are available for use with sources such as CD, VCR, TV broadcasts and the AVR 120’s own FM/AM tuner. Along with the latest Dolby Pro Logic* II decoding technology, Dolby 3 Stereo and custom Hall and Theater modes, only Harman Kardon receivers offer Logic 7® to create a wider, more enveloping field environment and more defined fly-overs and pans. Another Harman Kardon exclusive is VMAx®, which uses proprietary processing to create an open, spacious sound field even when only two front speakers are available. Finally, the AVR 120 is among the very few A/V receivers that offer decoding of MP3 data, so that you may listen to the latest music selections directly from compatible computers or playback devices with the power and fidelity you expect from Harman Kardon."
The AVR 120 boasts no less than 6 (SIX!) Digital Inputs (3 Optical, 3 Coaxial), a pair of digital outputs, a Sub-woofer Pre-out, and Color-Coded Input, Output and Speaker Terminals which comply with the latest CEA standards for easy installation.
If you're looking for a versatile, high quality, easy to use AVR at a reasonable price then look no further.
Product Dimensions: 17.3 x 17.1 x 6.5 inches, Weight: 30.8 pounds
Includes original HK Remote and soft copy of manual in PDF.		$125.00


JVC 500 Watt 5.1 AVR RX-6042JVC 500 Watt 5.1 AVR in excellent condition. Features full set of 5.1 Pre-inputs, 3 digital inputs. Great choice for budget Home theater system with decent power.
Features:
100 watts x 2 min. RMS, both channels driven into 8 ohms from 40Hz to 20kHz with no more than 0.8% THD
100 watts x 5 min. RMS, into 8 ohms, 1kHz, 0.8% THD
5.1 channel pre in/DVD Multi-Channel audio compatible
High-Performance Motorola 160-MIPS 24/48-bit DSP
DSP Digital Equalizer
Dolby Digital, dts, and dts 96/24 decoders built-in for theater quality surround from digital sources
Dolby Pro Logic II in Full Digital Processing
Fully Discrete Outputs to ensure greater fidelity and longer life
Digital Acoustics Processor (DAP): 7 presets for Multi-Channel Digital Sources (Theater 1, Theater 2, Hall 1, Hall 2, Dance Club, Live Club, Pavillion) 9 presets for 2-Channel sources (Mono Film, Theater 1, Theater 2, Hall 1, Hall 2, Dance Club, Live Club, Pavilion, All CH Stereo)
3D-Phonic
A/V COMPU LINK
Enhanced COMPU LINK Control System
Fluorescent Display with Dimmer
Sub-woofer Preout
2 Component Inputs, 2 S-video Inputs, 2 Composite Video Inputs
1 Component Outputs, 2 S-Video Outputs, 2 Composite Outputs
3 Assignable Digital Inputs (2 Optical, 1 Coaxial) that you can designate to any digital source
Screw-type speaker terminals (Suitable for banana plugs): Front L/R, Center, Surround L/R
15 AM and 30 FM station memory
Dimensions: Width: 17 3/16", Height: 5 13/16", Depth: 16 1/8", Weight: 19.5 lbs
With JVC remote and soft copy of manual in PDF. Asking just $125.		$125.00
JVC RX-7520VBlack, 500 Watt 5.1$125.00


Good Quality Kenwood 500 Watt 5.1 AVR VR-410Kenwood's VR-410 offers the kind of cool, forward-thinking features that A/V fans love! SRS Circle Surround 5.1 gives you more ways than ever to enjoy 5.1-channel sound.
If you're a fan of older movies but wish you could experience them in spacious surround, or you just want bigger impact from your favorite recorded programs, your wish has come true. This unique feature produces 5.1-channel surround sound from almost any source — even from stereo-encoded broadcasts!
This Kenwood is loaded with goodies — the list goes on and on: 100 watts x 5 channels for powerful music and home theater; an anti-resonant aluminum front panel; built-in Dolby® Digital and DTS decoding to unlock the 5.1-channel discrete digital sound on thousands of DVD movie soundtracks; 3 audio DSP modes with user adjustments that let you customize the sound to your tastes; and a 5.1-channel input for compatibility with future multichannel formats. Preamp outputs for all channels let you upgrade your system with separate amps. There's also an optical output for direct digital recording to CD-R or MiniDisc.
Details:
Dolby Digital, DTS, and Pro Logic™ decoding
SRS Circle Surround 5.1
3 audio DSP modes
4 digital inputs (2 optical, 2 coaxial)
optical digital output
3 audio, 5 A/V (including one 5.1-channel, 1 front-panel, and 5 S-video) inputs
preamp outputs for all channels
100 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.7% THD — or 100 watts x 5 in home theater mode
anti-resonant aluminum front panel
40 AM/FM presets
Dimensions: 17-5/16"W x 5-3/4"H x 16-1/2"D
Includes soft copy of manual in PDF, but no remote. This is a great Kenwood AVR for an excellent price of just $125.		$125.00
SLS QG-500AVRBlack$125.00


Sony 100 WPC Stereo Receiver STR-DE197Don't be fooled by the affordable price tag — since the STR-DE197 is made by the experts at Sony, you can count on clear, dynamic stereo sound and rock-solid dependability.
For music fans — and for rooms where you don't need a complete home theater system — this receiver delivers the audio "basics" and more. It treats your music right with 100 watts per channel for smooth, low-distortion sound.
You get four audio inputs for your music sources (such as CD, MiniDisc, and cassette). You can select AM/FM stations using the 30 memory presets, or tune them in directly via the number buttons on the front panel. The included remote gives you easy control of this receiver and any other compatible Sony audio components you've got in your system.
Details:
100 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.09% THD
built-in AM/FM tuner, Presets : 20 FM - 10 AM
4 audio inputs
front-panel switching for 2 pairs of main speakers (8 - 16 ohm speakers only)
headphone jack, AC Outlet : 1 Switched
Dimensions: 16-7/8"W x 5-1/4"H x 12-15/16"D
Nice clean Stereo Receiver from Sony. Pumps out 100 Watts per channel. Supports A + B mode (can support 4 main speakers simultaneously, .) Also offers Composite Video switching,
Includes pre-programmed universal remote, soft copy of manual in PDF.
Asking just $125		$125.00


Sony 500 Watt 5.1 AVR with Remote STR-DE545 2 AVBLBeautiful Sony 500 Watt 5.1 AVR featuring:
3 x Digital Inputs (2 x Optical, 1 x Coaxial),
Subwoofer Pre-out, Front A + B Channels, Speaker Impedance selector (4 Ohms or 8 Ohms)
Composite and S-Video Handling, 5.1 Channel Inputs, Adjustable screen brightness/dimming, Bass Boost, Test Tone Generator,
Nameable Sources / Stations, Dolby Pro Logic, Dolby Digital, Customizable Sound Fields, Sleep Timer,
2 Available.
Includes original Sony remote, soft copy of manual in PDF.
Asking $125 each		$125.00
Yamaha RX-V396Black, 300 Watts 5.1 AVR$125.00


Budget Yamaha 375 Watt 5.1 AVR with Remote RX-V430Budget, feature loaded 375 Watt 5.1 AVR from Yamaha
Features:
The RX-V430 is a powerful and versatile 5-channel receiver, delivering 75 watts to each channel. The receiver provides plenty of processing and a host of Yamaha features.
With powerful and varied sound processing, the RX-V430 provides Dolby Digital, Dolby ProLogic II, and DTS Digital Surround decoding. Yamaha's Quad-Field CINEMA DSP allows enjoyment of Dolby Digital EX and DTS-ES Matrix 6.1 sound formats in the Phantom mode (using 5.1 channels). The RX-V430 provides 21 surround programs and offers a total of 41 surround environment variations.
Yamaha's proprietary ASIC LSI, the 32-bit YSS-938, assures top quality audio performance.
The RX-V430 has two audio-only inputs and one audio-only output. Including the audio portion of A/V source inputs, the receiver provides 1 optical and 1 coaxial digital input.
When a source is selected, the receiver automatically chooses the best quality input connected - digital audio rather than analog audio, etc. The receiver also makes the same automatic selection for decoding, down the hierarchy from discrete multi-channel, to matrix, and then stereo.
Building on technology incorporated into its world famous "silent" musical instruments, Yamaha has added HRTF and "Virtual" technology to create a realistic surround movie effect using standard, two-channel headphones.
The RX-V430's rear panel has input jacks to accommodate an external decoder. The receiver is ready for any other 5.1 multi-channel format, should one be developed.
Yamaha's famed low impedance drive circuitry is included in this receiver so that it can handle virtually all loads and a wide variety of speakers. For further speaker matching, the amplifier can be set for either 4- or 8-ohm speakers.
The new receiver provides a subwoofer pre-out so that the low frequency signals can go directly to your powered subwoofer.
The advantage of full range, 20 to 20,000 Hz, damping is that it improves the definition and resolution of the sound output throughout the audible frequency range.
Permits a delayed receiver turn off. It can be set for up to two hours in 30 minute increments.
Up to 40 preset AM and FM stations can be grouped in five groups of eight stations. These groupings make it easy for family members to easily access their favorite stations or to have musical genres, such as all the jazz stations, grouped together.
Includes Pre-programmed Universal Remote, and soft copy of manual in PDF. Asking just $125 for this well equipped budget Yamaha AVR, fully tested and working well.		$125.00


Yamaha 400 Watt 5.1 AVR 5 Digital Inputs, Remote RX-V520Yamaha 400 Watt 5.1 AVR with 5 Digital Inputs and Yamaha Remote
Specifications
Tuning range: FM, MW
Power output: 80 watts per channel into 8Ω (stereo)
Surround output: 80W (front), 80W (center), 80W (rear)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.06%
Damping factor: 60
Input sensitivity: 150mV (line)
Signal to noise ratio: 98dB (line)
Channel separation: 45dB (line)
Output: 150mV (line)
Speaker load impedance: 4Ω (minimum)
Digital inputs 5: 1 x coaxial, 4 x optical
6-channel direct audio inputs to accommodate a DVD-Video, DVD-Audio, SACD, or universal player.
Dimensions: 435 x 151 x 390mm, Weight: 10kg (22 lbs)
Includes Yamaha remote, and soft copy of manual in PDF. Asking just $125.		$125.00


Harman Kardon 200 Watt 5.1 AVR, AVR 110You want Dolby® Digital home theater, from a top brand, with excellent sound quality and innovative features, all at an irresistible price.
Done! The experts at H/K packed their AVR 110 with 40 high-current watts x 5 channels (50 x 2 stereo) for clean reproduction of today's cutting-edge digital sources.
Built-in processing is impressive: Dolby Digital, DTS, and Pro Logic™ decoding; exclusive 5.1 Logic 7® modes (Music and Cinema) that produce 5.1-channel sound from 2-channel analog, digital (PCM), or surround-encoded sources; 192kHz/24-bit digital-to-analog converters; and MP3 decoding for use with compatible components (or PC sound cards) that can send an MP3 bitstream through an optical or coaxial digital connection. And how's this for a rare and very convenient treat: front-panel digital inputs for quick hookup of portables and other gear with digital output!
Details:
Dolby Digital, DTS, and Dolby Pro Logic decoding, MP3 decoding, 192kHz/24-bit DACs, 5.1 Logic 7® Cinema and Music modes
Conservatively rated 50 watts x 2 (stereo) into 8 ohms (20-20,000 Hz) at 0.07% THD — or 40 watts x 5 channels into 8 ohms (20-20,000 Hz) at 0.07% THD (surround mode)
Front-panel digital inputs: 1 optical, 1 coaxial, back-panel digital inputs: 2 optical, 2 coaxial, back-panel digital outputs: 1 optical, 1 coaxial
2 audio and 5 A/V (including 5 S-video and 1 front-panel) inputs
Multi Brand remote (controls up to 6 devices), VMAx virtual surround processing, high-current, ultrawide-bandwidth amp design, preamp-level subwoofer output
Binding posts for all speakers, one set of main speaker outputs, 30 AM/FM presets
Dimensions: 17-5/16"W x 6-1/2"H x 17-1/8"D, 31 lbs
Includes universal remote and soft copy of manual in PDF.
Asking just $110.		$110.00

Screenshot



Screenshot

Sony STR-DE405Sony 400 Watt 5.0 AVR w/ Phono$95.00


Yamaha 400 Watt 5.1 AVR Supports Passive Sub HTR-5920Yamaha AVR in great condition, featuring 80 Watts Per Channel across 5 Channels, plus 2 x Digital Inputs, Component Video Handling,
Less common feature on this one is a Dedicated Subwoofer powered output for a Passive Sub, in addition to a more standard Subwoofer Pre-out for use with Active Sub.
Also features Sleep Timer and Night Listening Mode to improve "listenability" at lower volumes or at night.
With pre-programmed universal Remote and Soft Copy of Manual in PDF.
Asking just $95 for this simple Yamaha 5.1 AVR.		$95.00


Yamaha 400 Watt 5.1 AVR with Phono - Please read RX-V1200Yamaha 400 Watt 5.1 AVR with Phono - Please see below.
This is a good quality 33lb Yamaha AVR, with a true 80 Watt per channel output in both stereo mode and in surround sound modes.
We normally list this model for $245, however, this particular unit has a failed display. (It is "stuck" on a particular screen). We have tested remaining functions, and everything seems to be working nicely, sound and power are very good. While some of the features are challenging to locate without the use of the screen, we are including a universal remote to help navigate settings.
Specifications
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.04%
Damping factor: 80
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 86dB (MM), 100dB (line)
Channel separation: 55dB (MM), 45dB (line)
Dimensions: 435 x 171 x 431.5mm (17.1 x 6.7 x 17 inches)
Weight: 15kg (33 lbs)
Heavily discounted to just $95. If you are patient, or are comfortable just using it in stereo mode where the display is much less important, this could be a great deal for you. Great sounding budget option for an inexpensive but powerful 2 channel music listening system (perfect for vinyl)		$95.00
Pioneer VSX-402Black, main, centre only$75.00




Harman Kardon 350 Watt 7.1 AVR For Parts or Repair AVR 254Harman Kardon 350 Watt 7.1 AVR For Parts or Repair
Normally a great model, but this one is completely non-functional

Please don't ask what is wrong with it, as absolutely nothing is working.

Being sold as is for just $45		$45.00


Sony 100 WPC AVR **3.1 Only, please see Description** STR-DE585Sony 100 WPC AVR **3.1 Only, please see Description**
This 20 year old Sony has limited functionality, and is being sold "as-is" for someone looking for an inexpensive budget amplifier.
Front Left and Right, Center Channel and subwoofer outputs are all working correctly.
If you're looking for an inexpensive 3.1 surround amplifier or stereo only amplifier with subwoofer, then it might be a good option for you.
Some of the front mounted buttons are temperamental, and the tuner (Radio) has a background hum.
Unfortunately this model is not valuable enough to warrant the time / parts required to repair it, but we try hard to keep as many electronic components out of the landfill as possible.
So, asking just $25 for this Sony that has seen better days, but hopefully will find a new home and be able to provide years more of good use, albeit in a more limited capacity.
Will be auditioned for you at time of purchase.		$25.00
Post Views: 179