Custom Speaker Cable Builder
>🎯 Your specs, your cable — choose cable type, length & connectors
>💰 Live pricing — price updates instantly as you configure
>↔️ Bi-wire capable — available on Kimber 4PR and House Quad
>🔥 Heat-shrink reinforced — colour-coordinated at every termination & joint
>🍁 Hand-assembled in Ottawa — backed by our Bumper-to-Bumper Warranty
Looking for a custom speaker cable builder that lets you order exactly what you need? You’ve found it. The Radique Audio Custom Speaker Cable Builder lets you configure a made-to-order speaker cable online — your cable type, your length, your connectors — with live pricing and no guesswork.
>🎯 Your specs, your cable — choose cable type, length & connectors
>💰 Live pricing — price updates instantly as you configure
>↔️ Bi-wire capable — available on Kimber 4PR, Kimber 4TC and House Quad
>🔥 Heat-shrink reinforced — colour-coordinated at every termination & joint
>🍁 Hand-assembled in Ottawa — backed by our Bumper-to-Bumper Warranty
Choose Your Cable
Each cable is hand-built to order using the conductor type you choose — budget-friendly CCA, OFC House Quad, or Kimber’s legendary 4PR and flagship 4TC.
Our entry-level cable. CCA (copper-clad aluminum) conductors deliver clean, reliable performance — the smart, budget-friendly choice for everyday hi-fi and home theatre.
A step up with OFC (oxygen-free copper) conductors and a discreet white jacket — ideal for running along baseboards. Practical, affordable bi-wire option for dual-binding-post speakers.
The audiophile’s cable. Kimber’s legendary braided OFC design reduces interference and delivers noticeably cleaner, more detailed sound — a favourite in the vintage and hi-fi community for decades.
Our flagship. Kimber’s premium 4TC steps up from the 4PR with a higher conductor count and larger gauge for even greater clarity, dynamics and low-end authority — the reference choice for serious listening rooms.
Choose Your Terminations
Each end is terminated independently using Radique Audio gold-plated connectors. Mix and match freely.
🍌 Banana plugs — best for most modern binding posts; tool-free and quick
🔱 Spades — great for larger, high-end binding posts; audiophile favourite
📌 Pins — for spring-clip terminals or tighter recessed posts
〰️ Bare wire — stripped, twisted and heat-shrink reinforced; the most economical finish
Spring-loaded, tool-free. Most popular choice — works with the vast majority of amps and speakers.
Audiophile favourite. Solid, secure fit — especially suited to higher-end binding posts.
Compact and precise. Ideal for small or recessed binding posts that don’t accept bananas or spades.
Stripped and twisted, then reinforced with colour-coordinated heat-shrink tubing at both ends and at the joints. For amplifiers or speakers with screw-down terminals — our most economical finish.
Every termination and joint is reinforced with colour-coordinated heat-shrink tubing for a clean, professional finish built to last.
What Is Bi-Wire?
Some speakers have two sets of binding posts — one for high frequencies (tweeter) and one for low frequencies (woofer). Bi-wiring connects a single amplifier channel to both sets using one cable: a single connector at the amplifier end, and two connectors at the speaker end. If your speakers support it, bi-wiring can improve clarity and separation. Select Kimber 4PR, Kimber 4TC or Radique House Quad and check “Configure as Bi-Wire” to enable this option.
⚠️ Use bi-wire only if your speakers have dual binding posts with removable jumpers.
How to Use the Custom Speaker Cable Builder
>🔌 Select a cable type — House CCA for budget, House Quad for a discreet OFC option, or Kimber 4PR / 4TC for audiophile-grade.
>📏 Enter your length — in feet or metres, for each cable. Measure amp to speaker and add a little slack. Most setups need 5–20 ft per cable.
>🔢 Choose Pair or Single — a Pair is a matched set of two cables (the default, ideal for stereo). Switch to Single if you only need one run — handy for a subwoofer, centre channel, or a replacement.
>🔗 Choose your End A (Amplifier End) connector — match your amplifier’s binding posts.
>🔊 Choose your End B (Speaker End) connector — can be different from End A.
>↔️ Bi-wire option — if your speakers have dual binding posts, check “Configure as Bi-Wire” and select HF and LF terminations independently.
>💰 Review your live price — updates instantly with every selection, showing your per-pair price and the cost per cable.
>🛒 Add to Cart — your full configuration is saved so our team builds exactly what you ordered.
🎵 Ordering for stereo? Choose Pair for a matched set of two cables — the default and the right choice for most systems. Only need one? Switch to Single.
🔧 Need multiple cables with different lengths or configurations? No problem — build one, add it to your cart, then come back and build the next. Each cable (or pair) is configured and priced independently.
All custom speaker cables are hand-assembled by the Radique Audio team in Ottawa and covered by our Bumper-to-Bumper Warranty. Questions about which cable or connector is right for your system? Email us at [email protected] — we’re happy to help.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 8 × 4 in |
Related Products
Pair of 3′ 12 AWG Radique Speaker wires with Banana Plugs
Pair of 5′ 12 AWG Radique Speaker wires with Banana Plugs
Kimber Kable 4PR Speaker Cable — Bulk by the Foot or Meter
• Genuine Kimber Kable 4PR bulk speaker cable
• Choose Foot or Meter as your purchase unit
• Ships unterminated and un-stripped for DIY customers
• Approx. 2 x 13 AWG braided OFE copper design with polyethylene dielectric
• Want it stripped, prepped, or fully terminated in standard or bi-wire form? Order that version through our Custom Speaker Cable Builder
• Final sale on all custom-length bulk-wire orders — please measure twice before ordering
Kimber Kable 4TC Speaker Cable — Bulk by the Foot or Meter
• Genuine Kimber Kable 4TC bulk speaker cable
• Choose Foot or Meter as your purchase unit
• Ships unterminated and un-stripped for DIY customers
• Approx. 2 x 13 AWG braided OFE copper design with low-loss fluorocarbon dielectric
• Want it stripped and prepped with reinforced split, or fully terminated in standard or bi-wire form? Order that version through our Custom Speaker Cable Builder
• Final sale on all custom-length bulk-wire orders — please measure twice before ordering
