Angled 16″ Metal Speaker Stands – Compact, Solid Metal
$95.00
Sixteen inches tall, with angled pillars that still keep the top platforms level and parallel to the floor. The platforms measure about 6.75 by 6.25 inches and the bases 12 by 10, so they hold a compact bookshelf or a satellite steadily without taking much floor. Radique high-density felt feet fitted. Very good condition, light honest wear only.
1 in stock
Angled 16″ Metal Speaker Stands – Compact, Solid Metal
These 16-inch speaker stands use angled metal pillars to add a touch of visual interest while keeping the top platforms level and parallel to the floor, providing a solid, stable perch for compact bookshelf or satellite speakers. They are well suited for small to medium speakers in two-channel or home theater setups where space is limited but proper placement still matters.
Each stand uses a robust metal column and base, giving a reassuring sense of stability despite their compact footprint. The top platforms measure approximately 6.75 x 6.25 inches, ideal for smaller monitors or satellites, while the 12 x 10 inch bases provide a stable foundation without dominating floor space. They have been fitted with Radique Audio High Density felt feet, which help protect hard floors and make sliding and micro-repositioning the stands easy without scratching surfaces.
Cosmetically, this pair is in very good condition, with clean lines and only light signs of careful use visible on close inspection. The angled pillars give the stands a more modern, dynamic look than straight-post designs, while the flat platforms keep speakers level for predictable imaging and alignment with your listening position.
Key details:
Height: 16 inches (stand height)
Construction: Solid metal pillars and base
Top plate: Flat, parallel to floor
Top plate size: 6.75 x 6.25 inches (approx.)
Base size: 12 x 10 inches (approx.)
Weight: 5.5 Lbs per stand
Feet: Radique Audio High Density felt feet, ideal for hard flooring
Condition: Very Good – light, honest wear only
A tidy, space-efficient pair of 16″ metal speaker stands with stylish angled pillars, flat top plates, and Radique’s felt feet, ready to give your satellite or bookshelf speakers a stable, properly supported home.
| Weight | 13 lbs |
|---|---|
| Dimensions | 16 × 22 × 20 in |
Related Products
Paradigm S-30 29″ Speaker Stands, All-Metal Pair, Black
Heavy die-cast aluminium bases under rectangular steel columns you can fill with dry sand or shot, and a cable channel run up the inside so the speaker wire never shows. The steel top plates measure about 5.5 by 5 inches and carry isolation pads. Fitted here with Radique high-density felt feet for hard floors; spikes can still be added later. Very good condition.
Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair
Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.
Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black
42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet
Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.
Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair
Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.
Three-Post 23″ Steel Speaker Stands – Cable Routing, Spiked
The largest of the three posts is hollow, so speaker wire drops in at the top plate and comes out at the base instead of trailing across the floor. A 10 x 12 inch base under a 23 inch column, a 5 x 6.5 inch top plate, 50 lbs per stand, and threaded adjustable spikes with rubber caps. Sold as a pair.
B&W 24″ Dual-Pillar All-Metal Speaker Stands, Pair, Like-New
Twenty-four inches, which puts a bookshelf tweeter at seated ear height, on twin steel pillars that are hollow and meant to be filled — sand or shot adds 10 to 15 lb a stand. The complete original spike set is here, top plate and bottom, though the pair currently wears Radique high-density felt feet for hard floors. Assembled and ready. Excellent cosmetic condition.
