High End Dual Pillar 24.5″ B&W Speaker Stands B&W Stands
$295.00
Out of stock
Get first dibs on the next one
High End Dual Pillar 24.5″ B&W Speaker Stands, extremely heavy, sturdy construction.
Boast 8″ x 7″ Speakers platforms and currently equipped with large, heavy rubber pads suitable for hardwood or ceramic floors. Will not budge with the weight of the stands and your speakers on them.
Stand bases measure 11.75″ x 9.5″
Retail new for $199 each plus HST. $449 with HST. Asking just $295 for the pair.
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!
| Dimensions | 15.75 × 25 × 28.5 in |
|---|
Bowers & Wilkins began in Worthing, England, in 1966, founded by John Bowers. The name comes from the Worthing electrical shop he ran with Roy Wilkins. Its 800 Series monitors have been used at Abbey Road Studios since 1980, Abbey Road says. We carry B&W towers, bookshelf speakers, centre channels and stands. We've had more than 200 B&W listings so far. Every used B&W here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
The Bowers & Wilkins story, 1966 to today
John Bowers founded B&W in Worthing, England, in 1966, after hand-assembling speakers at the electrical shop he ran with Roy Wilkins. Its first speaker, the P1, used B&W's own cabinet and crossover with bought-in drivers, and the DM1 and DM3 "Domestic Monitors" followed in 1968.
Kevlar and the 801. B&W identified Kevlar as a cone material in 1974, and the DM6 of the mid-1970s used Kevlar cones. The original 801 monitor of 1979 to 1980 made its name in recording studios: Abbey Road says it was the first studio to use it, in 1980, and has used the 800 Series ever since.
Matrix and Nautilus. The Matrix cabinet bracing arrived in the mid-to-late 1980s. John Bowers started the project that became the Nautilus, the spiral-shell flagship, before he died in 1987, and it launched in 1993. The first 600 Series followed in 1995, and diamond-dome tweeters arrived in 2005.
New owners. EVA Automation bought B&W in 2016, Sound United in 2020 and Masimo in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 800 Series Diamond D5, unveiled in June 2026, is built in Worthing.
A Canadian connection. Classé Audio of Montreal was part of the B&W Group from 2001 until B&W closed its Montreal headquarters in 2017.
Which B&W is which?
DM (Domestic Monitor), 1968 onward: from the DM1 and DM3 to models such as the DM6 and DM7. The DM prefix carried into early 600 Series names.
600 Series (1995 to today): B&W's entry hi-fi line; the 2020 Anniversary Edition was its seventh generation. The 606 belongs here.
CDM (mid-1990s to about 2003): such as the CDM 1, with a metal-dome tweeter and a Kevlar cone.
700 Series (about 2003 to 2006): Nautilus technology at mainstream prices, such as the 703 and 705.
CM Series (2006 to 2017): such as the CM1 and the CM4 towers, replaced by the 700 Series S2 in 2017.
800 Series (from 1979 to 1980): from the original 801 through the Matrix, Nautilus 800, Diamond, D3, D4 and D5 generations.
Nautilus (1993): the spiral-shell flagship, still made in small numbers.
Buying used B&W: what to check
Tweeter domes. B&W used metal-dome tweeters in the CDM, 600 and CM lines, and owners report squashed domes. Inspect each dome closely.
Original tweeters. Some CDM-era tweeters are discontinued, and rebuilt or substitute tweeters change the sound. Ask whether the originals are fitted.
Woofer surrounds. Owners report rubber surrounds that have hardened with age. Press each surround gently: it should feel supple.
1970s DM models. Expect crossover capacitors in a 40-year-old DM to need replacing.
Where it was made. The 800 Series is built in Worthing; the 600 and 700 Series are made in China. Check the label before calling a B&W "made in England".
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
Related Products
Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair
Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.
Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black
42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.
Angled 16″ Metal Speaker Stands – Compact, Solid Metal
Sixteen inches tall, with angled pillars that still keep the top platforms level and parallel to the floor. The platforms measure about 6.75 by 6.25 inches and the bases 12 by 10, so they hold a compact bookshelf or a satellite steadily without taking much floor. Radique high-density felt feet fitted. Very good condition, light honest wear only.
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet
Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.
Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair
Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.
