Top Metal Cover for Pioneer SX-550 (3 Available)
$45.00
The top metal cover only, and this is a replacement part rather than the receiver. It fits the Pioneer SX-550, and this one is in very good cosmetic condition. Three are available and they are sold individually. If yours is dented, scratched or missing, this is what replaces it.
3 in stock
Related Products
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet
Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.
Mirage Omnisat Wall & Ceiling Mount Clip – Original Factory Part
The factory clip supplied with the first-generation Omnisat, and the part its moulded base was shaped to accept. The clip goes on the wall or ceiling first and the speaker slides down onto it under its own weight — a one-person job, and the speaker lifts off again in seconds. Three-quarters of an inch of profile. Not the v2 bracket; the two do not interchange. Very good condition.
Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair
Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.
23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair
A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.
Marantz WC-10 Walnut Cabinet – Fits 1070, 1060, 112 and More
The original Marantz wood case for the slim-chassis components, and we have two of them.
✔️ Two available, both Very Good — the price is per cabinet
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
