Mirage
Showing 25–25 of 25 resultsSorted by price: high to low
Mirage OMNI 350 Omnipolar Towers – Designed in Canada, Black Ash
A pair of slim Mirage towers built around the company's Omnipolar design, in very good condition, that fill a room with sound instead of aiming it at one chair.
✔️ Very Good condition — black ash cabinets, drivers and grilles present cleanly
✔️ Designed and engineered in Canada around Mirage's room-filling Omnipolar sound
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
High-Fidelity Canadian Mirage Floorstanding Speakers 460
A 1-inch dome tweeter and an 8-inch woofer in a heavily braced, rear-ported cabinet — 35 Hz to 20 kHz, 88 dB sensitivity, 8 ohms, and 33 lbs apiece. The ports fire rearward and the grilles are inset and non-diffracting; binding posts take banana, spade or bare wire. Rated for 20 to 100 watts a channel. Tested and working perfectly.
Mirage MX HT Satellite Speakers – Omnipolar Technology, 2 Prs
The smallest speaker Mirage ever made: a 0.625-inch titanium dome and a 2.5-inch aluminum woofer firing into an Omniguide deflector that spreads sound through 360 degrees. 110 Hz to 20 kHz, 87 dB, 8 ohms, 4.3 inches tall and 1.5 lbs each. High-gloss black with magnetic grilles. Like new condition; two pairs and a single available.
Mirage Nano S8 8″ Subwoofer 200W Peak – Downward Firing
A down-firing 8-inch driver with Mirage's Ribbed Elliptical Surround, 200 watts dynamic peak, and a front-ported cabinet running 33 to 120Hz. The rear panel carries a continuously variable low-pass filter, 40 to 150Hz at 18dB per octave, which the fixed-crossover Nano never had — it will cross to almost any satellite. Level 1 serviced here; very good cosmetic condition in dark grey.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite – Made in Canada
Both drivers fire upward into spoon-shaped reflectors Mirage calls OMNIGUIDEs, throwing sound through a full 360 degrees with a deliberate bias toward the front — which is what takes the sweet spot off a single chair. This is the original version at a genuine 7 lbs each, with a cast aluminium baffle and butyl rubber surrounds rather than foam. Built in Canada; condition very good.
Mirage Nano sysPB-1 8″ Powered Subwoofer – Platinum
An 8-inch down-firing woofer in a rounded cabinet, built as the bass module for Mirage's Nanosat 5.1 system and factory-crossed at 120 Hz to suit it. Line-level and speaker-level inputs both, so it will connect to a receiver that has no sub output. Auto power on and off. Two units available: one rated 9 out of 10 on performance, one rated 7 after an amplifier-board repair. Both very good cosmetically.
Mirage Nanosat Satellite Speaker — Stereo Pair | Refurbished | Radique
- Matched stereo pair of refurbished Mirage Nanosat Omnipolar® satellite speakers
- Full 360° Omnipolar® soundstage — fills any room from any position 🎵
- Individually inspected, tested, and refurbished by the Radique team
- Covered by our Bumper-to-Bumper Warranty 🔵
- 📸 Photos show the stereo pair — exactly what you receive
🔩 Want to mount these on a wall or ceiling? Compatible mounts available here →
Mirage Nanosat Satellite Speaker — Refurbished | Radique
The Mirage Nanosat is one of the most capable compact speakers ever made — a palm-sized powerhouse delivering a full 360° Omnipolar® soundstage that fills any room, from any position. 🎵
-
- >Available as a single speaker or a stereo pair
>Individually inspected, tested, and refurbished by the Radique team
>Covered by our Bumper-to-Bumper Warranty 🔵
>Optional wall/ceiling mount available — select from the options below
>📸 Photos show a stereo pair. Singles and pairs available — select your quantity below.
Mirage Omnisat V2 Wall/Ceiling Mount Bracket (OS v2B-1)
The factory bracket for the Omnisat v2, model OS v2B-1, for wall or ceiling. A single bolt threads into the base of the speaker and the plate anchors to the surface, keeping the satellite close in and correctly aimed — tidier and safer than a universal mount. The screw is included. Some paint transfer on the wall-facing side; the hardware itself is very good.
Mirage Omnisat Wall & Ceiling Mount Clip – Original Factory Part
The factory clip supplied with the first-generation Omnisat, and the part its moulded base was shaped to accept. The clip goes on the wall or ceiling first and the speaker slides down onto it under its own weight — a one-person job, and the speaker lifts off again in seconds. Three-quarters of an inch of profile. Not the v2 bracket; the two do not interchange. Very good condition.






































