35″ Metal Speaker Stands with Concrete Bases
$75.00
Thirty-five inches tall, with metal columns standing on heavy concrete bases — the mass is where it does the most good. The speaker platforms measure 3 inches square and the bases 6 inches square, mounted on high-density felt feet so they sit on a hardwood floor without marking it.
1 in stock
Related Products
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet
Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.
Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair
Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.
Three-Post 23″ Steel Speaker Stands – Cable Routing, Spiked
The largest of the three posts is hollow, so speaker wire drops in at the top plate and comes out at the base instead of trailing across the floor. A 10 x 12 inch base under a 23 inch column, a 5 x 6.5 inch top plate, 50 lbs per stand, and threaded adjustable spikes with rubber caps. Sold as a pair.
23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair
A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.
Paradigm S-30 29″ Speaker Stands, All-Metal Pair, Black
Heavy die-cast aluminium bases under rectangular steel columns you can fill with dry sand or shot, and a cable channel run up the inside so the speaker wire never shows. The steel top plates measure about 5.5 by 5 inches and carry isolation pads. Fitted here with Radique high-density felt feet for hard floors; spikes can still be added later. Very good condition.
Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair
Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.
Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black
42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.
Angled 16″ Metal Speaker Stands – Compact, Solid Metal
Sixteen inches tall, with angled pillars that still keep the top platforms level and parallel to the floor. The platforms measure about 6.75 by 6.25 inches and the bases 12 by 10, so they hold a compact bookshelf or a satellite steadily without taking much floor. Radique high-density felt feet fitted. Very good condition, light honest wear only.
