Good Quality Phono Solutions Phono Pre-amplifier PS1
$145.00
Forty decibels of gain with RIAA accuracy held to ±0.5 dB from 20 Hz to 20 kHz, from a board carrying twenty extra components and 1% tolerance resistors over the standard design. A 7 Hz subsonic filter, gold-plated RCA jacks, 80 dBA signal-to-noise, and an external AC/DC adapter that keeps the supply away from the signal. Five inches wide, in matte black steel.
1 in stock
The Phono Solutions PS-1 is a high-performance phono preamp, custom-designed by Technolink, that delivers exceptional sound quality and value, making it an excellent choice for vinyl enthusiasts.
This compact yet powerful unit features a redesigned circuit board with 20 additional components and 1% tolerance resistors, ensuring superior RIAA accuracy of ±0.5 dB and improved gain performance. It offers 2 dB more gain than comparable units, allowing your amplifier to operate at its ideal level. The PS-1 is housed in an understated black matte steel case with gold-plated RCA jacks for secure connections and includes a subsonic filter to eliminate unwanted low-frequency noise. Its external AC/DC power adapter minimizes hum for a cleaner sound.
Specifications:
RIAA Frequency Response: 20 Hz–20 kHz, ±0.5 dB
Gain: 40 dB
Signal-to-Noise Ratio: 80 dBA
Total Harmonic Distortion: 0.06%
Input Impedance: 47 kOhms/220 pF
Output Impedance: 600 Ohms
Rated Output: 310 mV
Maximum Output: 3.1 Volts
Overload: 30 mV (20 dB)
Subsonic Filter: 7 Hz
Dimensions: (Width x Height x Depth) 127 x 48 x 80 mm (5 x 1.9 x 3.1 inches)
Weight: Approx. 0.7 kg (1.5 lbs)
With its robust construction, accurate performance, and thoughtful design, the Phono Solutions PS-1 is the perfect addition to any vinyl setup. Don’t miss the chance to elevate your analog listening experience!
Includes original packaging. Asking $145.
| Weight | 3 lbs |
|---|---|
| Dimensions | 7.1 × 9 × 6 in |
Related Products
Braun Atelier A1 Slim Integrated Amp — 55 WPC, Pre-Out, Japan
The component that makes the rest of an Atelier system work, and the one people hunting these usually look for first. 55 watts per channel into 8 ohms and 80 into 4, with a preamplifier section that separates from the power stage — engineering that is not an afterthought to the industrial design. 445 mm wide and 70 mm tall, the exact footprint of the T1 tuner and C1 deck, so the stack reads as one machined object. Made in Japan for Braun. Good condition.
NAD C 272 Stereo Power Amplifier 150 WPC, 300 Watts Bridged
Start with the number that is not on the front: 150 watts per channel into 8 ohms and 150 into 4. Most amplifiers quote a comfortable 8 ohm figure and hope you never connect anything harder; this one holds its full rating into half the impedance, from a high-current Holmgren toroidal feeding all-discrete circuitry with NAD's PowerDrive topology behind it. A BRIDGE MODE switch on the back turns it into a single mono channel of roughly 300 watts into 8 ohms, so the system can be rearranged later rather than replaced. Very Good condition.
Sony TAE-20FB Falcon Preamplifier — Bronze, MM/MC Phono, Japan
The control amplifier from Sony's short-lived Falcon range — made in Japan for barely two years and rarely seen on this side of the Pacific. Bronze-anodised aluminium case, a real moving-coil phono input alongside moving-magnet, and a signal path that has been freshly recapped. A couple of light marks on the casework, otherwise Very Good. Ships from Kanata, ON.
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Ortofon Phono MC Pre-Amplifier T-10; Passive 32dB gain, 1:40
A passive step-up transformer, not an active preamp — it takes a low-output moving coil into an MM phono input with no power supply and nothing active in the path. Toroidal transformers with permalloy shielding give 32 dB of gain at a 1:40 ratio, suited to cartridges of 2 to 4 ohms putting out around 0.1 to 0.2 mV. Bandwidth 20 Hz to 45 kHz. Good condition, tested and working.
Jadis Defy DP-60 Tube Preamplifier — MM/MC Phono, Outboard PSU
A full-function valve preamplifier — line stage and a moving-magnet/moving-coil phono section, valves throughout, with the power supply in its own separate chassis. Hand-built in the south of France, in excellent condition, and it comes with the original factory cartons including the shaped foam box for the supply.
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
