Showing 1–12 of 39 resultsSorted by price: high to low

Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair

$211.00

Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.

23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair

$104.00

A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.

Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black

$104.00

42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.

Paradigm S-30 29″ Speaker Stands, All-Metal Pair, Black

$104.00

Heavy die-cast aluminium bases under rectangular steel columns you can fill with dry sand or shot, and a cable channel run up the inside so the speaker wire never shows. The steel top plates measure about 5.5 by 5 inches and carry isolation pads. Fitted here with Radique high-density felt feet for hard floors; spikes can still be added later. Very good condition.

Attractive 22.5″ Speaker Stands — Glass & Metal, Black

$90.00

Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.

Silver Metal 22.5″ Platform Speaker Stands

$90.00

Angled metal stands 22.5 inches tall, with 6-inch square platforms and 12 by 10 inch bases, and the cable routing concealed inside the pillar. High-density felt feet are fitted underneath, and a set of removable height-adjustable rounded metal feet is included as well.

Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet

$68.00

Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.

Angled 16″ Metal Speaker Stands – Compact, Solid Metal

$68.00

Sixteen inches tall, with angled pillars that still keep the top platforms level and parallel to the floor. The platforms measure about 6.75 by 6.25 inches and the bases 12 by 10, so they hold a compact bookshelf or a satellite steadily without taking much floor. Radique high-density felt feet fitted. Very good condition, light honest wear only.

Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair

$68.00

Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.

Athena 31.5″ All-Metal Speaker Stands, Heavy Bases, Pair

$68.00

All-steel columns on wide weighted bases, 31.5 inches tall and 10 lbs each, with cable routed through the hollow centre column. Athena built them as the partner for the S.5, so the original screws for the S.5's rear threaded inserts are included; on anything else the 5 by 3.25 inch top plate takes pads or putty. Radique Audio high-density felt feet fitted. Designed in Toronto; very good condition.

MDF Tri-Pillar Speaker Stands 29.5″, Solidly Built

$68.00

Tri-pillar MDF construction, 29.5 inches to the top plate, which puts most bookshelf speakers near seated ear level. Six-inch square plates on a 10.5 by 12 inch base, 8 lbs a stand. High-density Radique felt feet underneath, so they go straight onto tile or hardwood without marking it.

Heavy round-base 30″ metal Platform Speaker Stands

$54.00

Thirty inches fixed, which puts a satellite or a small bookshelf at seated ear height, on 12-inch round bases heavy enough to stay where you put them. The cable runs inside the column from base to top plate, so nothing shows. Top plates measure 3.75 by 3.5 inches. Felt feet for hardwood, tile or laminate, semi-gloss black. Very good condition, light signs of use.