Athena 31.5″ All-Metal Speaker Stands, Heavy Bases, Pair
$95.00
All-steel columns on wide weighted bases, 31.5 inches tall and 10 lbs each, with cable routed through the hollow centre column. Athena built them as the partner for the S.5, so the original screws for the S.5’s rear threaded inserts are included; on anything else the 5 by 3.25 inch top plate takes pads or putty. Radique Audio high-density felt feet fitted. Designed in Toronto; very good condition.
2 in stock
Athena 31.5″ All-Metal Speaker Stands, Heavy Bases, Pair
Designed in Canada.
A solid, heavyweight pair of Athena Technologies 31.5-inch all-metal speaker stands in very good condition — originally engineered as the dedicated partner for the award-winning Athena S.5 satellite/bookshelf speakers, and equally well-suited to other small bookshelf or satellite designs.
Athena Technologies was the high-value performance brand of Audio Products International of Toronto — the same Canadian engineering house behind Mirage and Energy, later acquired by the Klipsch Group. These stands reflect the same engineering-led approach the company brought to its loudspeakers: a tall, stable column on a wide weighted base, with thoughtful details that elevate them well above generic third-party stands at this price point.
Each stand is built entirely from steel, with a substantial weighted base measuring 12.75 x 8 inches and a 5 x 3.25 inch top plate sized perfectly for compact satellite and small bookshelf monitors. The 31.5-inch height places a typical satellite tweeter at the ideal seated ear-level for accurate imaging. The hollow centre column doubles as a concealed cable management channel, keeping speaker wire hidden from view for a clean, finished appearance. At a hefty 10 lbs per stand, they offer genuine real-world stability — the heavy base resists tipping and accidental knocks far better than the lightweight stands typically bundled with sub/sat systems.
A stand-out practical feature for owners of the matched system: each stand includes the original Athena mounting screws that thread directly into the inserts at the rear of the Athena S.5 satellites, providing a secure, drilling-free attachment. These screws are sized specifically for the S.5 and are not intended for use with other speakers; for non-Athena bookshelf or satellite speakers, the top plate works equally well with speaker-stand pads or adhesive putty. The stands are currently fitted with Radique Audio High Density Felt Feet — our own in-house upgrade — ideal for hardwood, tile, laminate, or other hard-floor surfaces where they will not mark or scratch the finish.
Specifications per stand:
Construction: All-steel column and base, heavy-weighted
Height: 31.5 in. (800 mm)
Top plate: 5 x 3.25 in. (127 x 83 mm)
Base: 12.75 x 8 in. (324 x 203 mm)
Cable management: Concealed routing through hollow centre column
Mounting: Original Athena screws included for direct attachment to the Athena S.5 rear-panel threaded inserts (Athena S.5 only); top plate also accepts speaker-stand pads or adhesive putty for non-Athena bookshelf and satellite speakers
Floor interface: Radique Audio High Density Felt Feet fitted, suitable for hardwood, tile, and laminate
Finish: Matte black
Country of design: Canada (Audio Products International / Athena Technologies, Toronto)
Dimensions per stand (W x H x D): 12.75 x 31.5 x 8 inches (324 x 800 x 203 mm)
Weight: 10 lbs (4.5 kg) per stand
An excellent choice for heavy satellite speakers or small high-quality bookshelf monitors, especially for owners of Athena S.5 satellites looking for the dedicated factory-matched stand. Two pairs available, each in very good condition.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence — Canadian-designed, properly built, and ready to anchor your bookshelf system.
| Weight | 22 lbs |
|---|---|
| Dimensions | 18 × 16.75 × 35.5 in |
Related Products
Three-Post 23″ Steel Speaker Stands – Cable Routing, Spiked
The largest of the three posts is hollow, so speaker wire drops in at the top plate and comes out at the base instead of trailing across the floor. A 10 x 12 inch base under a 23 inch column, a 5 x 6.5 inch top plate, 50 lbs per stand, and threaded adjustable spikes with rubber caps. Sold as a pair.
23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair
A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.
Paradigm S-30 29″ Speaker Stands, All-Metal Pair, Black
Heavy die-cast aluminium bases under rectangular steel columns you can fill with dry sand or shot, and a cable channel run up the inside so the speaker wire never shows. The steel top plates measure about 5.5 by 5 inches and carry isolation pads. Fitted here with Radique high-density felt feet for hard floors; spikes can still be added later. Very good condition.
Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair
Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.
Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black
42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.
Angled 16″ Metal Speaker Stands – Compact, Solid Metal
Sixteen inches tall, with angled pillars that still keep the top platforms level and parallel to the floor. The platforms measure about 6.75 by 6.25 inches and the bases 12 by 10, so they hold a compact bookshelf or a satellite steadily without taking much floor. Radique high-density felt feet fitted. Very good condition, light honest wear only.
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet
Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.
Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair
Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.
