IsoAcoustics GAIA I Speaker Isolators (Set of 4)
$649.99
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 isolators for one heavy floor-standing speaker or subwoofer up to 220 lb (100 kg)
- ✔️ Screws in place of your spikes: M8-1.25, M12-1.25 and 1/4″-20 adaptors included
- ✔️ Machined stainless steel, dark chrome, 2.5 × 1.9 in (62 × 49 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
GAIA I: for big speakers, up to 220 lb
The largest of the original GAIA isolators, for heavy floor-standing speakers and subwoofers. It’s the GAIA you’ll find under big towers, including in a symphony orchestra’s control room.
The short answer
IsoAcoustics GAIA I is a set of four isolators that screw into a heavy floor-standing speaker or subwoofer in place of its spikes or feet. One set carries a speaker of up to 220 lb (100 kg), so a pair of speakers needs two sets. Each isolator is 2.5 in wide and 1.9 in tall (62 × 49 mm), machined stainless steel with a dark chrome finish. Note the threads: GAIA I comes with M8-1.25, M12-1.25 and 1/4″-20 adaptors, where the smaller GAIAs have M6 instead of M12.
Pick your GAIA by speaker weight
One set of four goes under one speaker, so a pair of speakers takes two sets. Weigh one speaker, not the pair, and choose the model rated above it. Close to a limit? IsoAcoustics recommends moving up a size. All figures are IsoAcoustics’ own.
| Model | Speaker weight (one set of 4 per speaker) | Isolator size (W × H) | Thread adaptors |
|---|---|---|---|
| GAIA III | 70 lb (32 kg) | 1.7 × 1.5 in (43 × 39 mm) | M6-1.0 · M8-1.25 · 1/4″-20 |
| GAIA II | 120 lb (54 kg) | 2 × 1.7 in (51 × 43 mm) | M6-1.0 · M8-1.25 · 1/4″-20 |
| GAIA I (this one) | 220 lb (100 kg) | 2.5 × 1.9 in (62 × 49 mm) | M8-1.25 · M12-1.25 · 1/4″-20 |
| GAIA-TITAN Theis | 320 lb (145 kg) | 2.75 × 2 in (70 × 50 mm) | 1/2″-13 · M8-1.25 · M14-2.0 |
What GAIA I does
Decouples the speaker
Spikes tie a speaker’s cabinet to the floor. GAIA isolates it instead, which IsoAcoustics says cuts the reflected energy and structure-borne resonance that blur bass, imaging and low-level detail.
In a control room near you
IsoAcoustics shows the Boston Symphony Orchestra’s control room running B&W 802 speakers on GAIA. It’s built for that class of speaker.
An award-winning line
The GAIA line holds an EISA Best Product award (Hi-Fi Upgrade, 2019–2020), Stereophile’s 2019 accessory Product of the Year and a 2020 Absolute Sound Golden Ear.
Specifications
From IsoAcoustics’ published data.
| IsoAcoustics GAIA I | |
|---|---|
| Rated load | 220 lb (100 kg) per set of 4, one set per speaker |
| For | Heavy floor-standing speakers and subwoofers |
| Isolator size | 2.5 × 1.9 in (62 × 49 mm), W × H |
| Construction | Machined stainless steel, dark chrome finish |
| Thread adaptors | M8-1.25 · M12-1.25 · 1/4″-20 (other sizes on request) |
| In the box | 4 isolators and thread adaptors |
| Orientation | Logo toward the listening position, or turned 180° |
| On carpet | Works as is; GAIA Carpet Discs (sold separately) for thick pile or underpad |
| Warranty | 2 years, IsoAcoustics manufacturer’s warranty in Canada |
Why buy IsoAcoustics from Radique
Genuine, from an authorized dealer
Radique is an authorized Canadian IsoAcoustics dealer, so this is the real thing, brand new in IsoAcoustics’ retail box, with the manufacturer’s warranty intact.
Sized for your gear
Tell us what it is going under and roughly what it weighs, and we’ll point you to the right model, or tell you when you don’t need one at all.
Pick up in Kanata, or have it shipped
Collect your order free in Kanata by appointment, or have it shipped across Canada and internationally: enter your city and postal code on the cart page to see live carrier rates before you commit. Buying it with one of our pre-owned speakers or components? It rides along in the same order at no extra shipping cost.
A Canadian company, like us
IsoAcoustics is based in Markham, Ontario. We like selling gear from people who answer the phone in the same time zone.
IsoAcoustics at Radique, on video
Our IsoAcoustics launch
Filmed the day we hit 500 subscribers: Mark and La-Donna unbox and talk through the IsoAcoustics line we carry, from the GAIA III to the Aperta Sub.
How we pack every order
Every order ships in our 275 lb-test double-wall packaging, engineered to protect your gear in transit. Here it is, start to finish.
Questions we get about this one
How many sets do you need?
One set of four per speaker, so two sets for a pair. Each set is rated for one speaker.
How do you choose between GAIA sizes?
Weigh one speaker. Up to 70 lb (32 kg) is GAIA III, up to 120 lb (54 kg) is GAIA II, up to 220 lb (100 kg) is GAIA I, and up to 320 lb (145 kg) is the GAIA-TITAN Theis. Close to a limit? Go up a size, as IsoAcoustics recommends.
Will it fit your speaker’s threads?
GAIA I comes with M8-1.25, M12-1.25 and 1/4″-20 adaptors, which cover most speakers with threaded spike inserts. Check what your current spikes screw into, or send us the make and model and we’ll check before you order. IsoAcoustics’ online product selector can help too.
Got B&W 800-series or Sonus faber speakers?
IsoAcoustics makes GAIA adaptor plates for B&W’s 800 D3 and D4 series and its Nautilus and Diamond models, and an M8 spacer for some Sonus faber speakers. We can order them in: ask us.
Does it work on carpet?
Yes. IsoAcoustics says GAIA works on carpet as it is, but on thick pile or carpet with underpad it does its best on GAIA Carpet Discs (choose the GAIA I size): solid stainless discs with 0.6 in (15 mm) spikes that give the isolators a firm base.
GAIA I or GAIA I Neo?
Same rating. GAIA I Neo adds up to 8.5 mm of height adjustment through a rotating lower ring, which helps level a speaker on an uneven floor, plus a pivoting bottom isolator and a choice of black or dark chrome. IsoAcoustics says Neo is not a replacement: the original GAIA I carries on.
Which way round does it go?
With the IsoAcoustics logo facing your listening position, or turned 180°, so the isolator lines up with the speaker’s forward and back motion.
What warranty does it have?
Brand new in IsoAcoustics’ retail box, with IsoAcoustics’ 2-year manufacturer’s warranty in Canada against defects in materials and workmanship. If anything is wrong, contact us and we’ll handle it with IsoAcoustics. More in our warranty FAQ.
What does shipping cost? Is pickup possible?
Pickup in Kanata is free, by appointment. To have it shipped, add it to your cart and enter your city and postal code on the cart page: you’ll see live carrier rates before you commit. We ship across Canada and internationally. Buying it with one of our pre-owned speakers or components? Then it rides along in the same order at no extra shipping cost.
Not sure which GAIA your speakers need?
Send us the make and model, or the weight of one speaker, and we’ll tell you which GAIA fits and which adaptor to use.
| Weight | 4.8 lbs |
|---|---|
| Dimensions | 8.5 × 8.0 × 2.8 in |
IsoAcoustics at Radique
Radique is an authorized Canadian IsoAcoustics dealer. Everything below is new and genuine: GAIA speaker isolators, OREA isolation feet, zaZen and DELOS platforms, ISO and Aperta stands, ISO-PUCKs and the Aperta Sub. Pre-owned IsoAcoustics turns up here too, marked Used/Vintage. Pick it up in Kanata by appointment, or have it shipped across Canada and internationally: enter your city and postal code on the cart page to see live rates. Bought with one of our pre-owned speakers or components, it rides along in the same order at no extra shipping cost. Not sure which one you need? Our IsoAcoustics product guide walks through the range, or ask us for a recommendation.
Under floor-standing speakers
GAIA isolators screw in place of your spikes, one set of four per speaker: GAIA III to 70 lb, GAIA II to 120 lb, GAIA I to 220 lb and the GAIA-TITAN Theis to 320 lb. Subwoofers sit on the Aperta Sub.
You may also like…
IsoAcoustics GAIA-TITAN Theis Speaker Isolators (Pack of 4)
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 heavy-duty isolators for one speaker or subwoofer up to 320 lb (145 kg)
- ✔️ Threaded studs in 1/2″-13, M8-1.25 and M14-2.0
- ✔️ Machined stainless steel, 2.75 × 2 in (70 × 50 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
IsoAcoustics GAIA I Neo Speaker Isolators (Pack of 4)
- ✔️ Genuine IsoAcoustics GAIA I Neo speaker isolators, brand new in box
- ✔️ Designed for floor-standing speakers and subwoofers up to 220 lbs (100 kg) per set of 4
- ✔️ Includes 4 isolators, 4 floor sliders, and thread adaptor kits in M12-1.25, M8-1.25, and 1/4”-20
- ✔️ Seamless height adjustment plus improved isolation for greater clarity, openness, and bass control
- ✔️ Backed by a 2-year manufacturer’s warranty in Canada
Related Products
- ✔️ Genuine IsoAcoustics GAIA I Neo speaker isolators, brand new in box
- ✔️ Designed for floor-standing speakers and subwoofers up to 220 lbs (100 kg) per set of 4
- ✔️ Includes 4 isolators, 4 floor sliders, and thread adaptor kits in M12-1.25, M8-1.25, and 1/4”-20
- ✔️ Seamless height adjustment plus improved isolation for greater clarity, openness, and bass control
- ✔️ Backed by a 2-year manufacturer’s warranty in Canada
- ✔️ Genuine IsoAcoustics GAIA III Neo speaker isolators, brand new in box
- ✔️ Designed for floor-standing speakers and subwoofers up to 70 lbs (32 kg) per set of 4
- ✔️ Includes 4 isolators, 4 floor sliders, and thread adaptor kits in M8-1.25, M6-1.0, and 1/4”-20
- ✔️ Seamless height adjustment plus improved isolation for greater clarity, openness, and bass control
- ✔️ Backed by a 2-year manufacturer’s warranty in Canada
- ✔️ Genuine IsoAcoustics GAIA II Neo speaker isolators, brand new in box
- ✔️ Designed for floor-standing speakers and subwoofers up to 121 lbs (55 kg) per set of 4
- ✔️ Includes 4 isolators, 4 floor sliders, and thread adaptor kits in M8-1.25, M6-1.0, and 1/4”-20
- ✔️ Seamless height adjustment plus improved isolation for greater clarity, openness, and bass control
- ✔️ Backed by a 2-year manufacturer’s warranty in Canada
- ✔️ Genuine IsoAcoustics DELOS 1815M1 maple isolation platform, brand new in box
- ✔️ Thick 1 3/4" maple butcher block with 4 integrated isolators
- ✔️ Designed for high-end turntables and sensitive audio components up to 65 lbs (29.5 kg)
- ✔️ Helps lower the noise floor and reduce structure-borne vibration for greater clarity and detail
- ✔️ Backed by a 2-year manufacturer's warranty in Canada
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A pair of isolation stands for large speakers and studio monitors
- ✔️ Rated to 75 lb (34 kg) short or 60 lb (27 kg) tall
- ✔️ Short 3.75 in (95 mm) or tall 8.5 in (215 mm), up to 6.5° of tilt
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A pair of isolation stands for medium speakers and studio monitors
- ✔️ Rated to 40 lb (18 kg) short or 35 lb (16 kg) tall
- ✔️ Short 3 in (76 mm) or tall 8.25 in (210 mm), up to 6.5° of tilt
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- ✔️ Genuine IsoAcoustics Aperta 300 center channel isolation stand, brand new in box
- ✔️ Single stand for center-channel speakers and similar applications up to 60 lbs (27.2 kg)
- ✔️ Available in Black or Silver with up to 6.5 degrees of tilt adjustment
- ✔️ Helps reduce cabinet resonance and improve clarity, focus, and dialogue intelligibility
- ✔️ Backed by a 2-year manufacturer's warranty in Canada
- ✔️ Genuine IsoAcoustics, brand new, from an authorized Canadian dealer
- ✔️ A set of 4 heavy-duty isolators for one speaker or subwoofer up to 320 lb (145 kg)
- ✔️ Threaded studs in 1/2″-13, M8-1.25 and M14-2.0
- ✔️ Machined stainless steel, 2.75 × 2 in (70 × 50 mm) per isolator
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- ✔️ Genuine IsoAcoustics GAIA Carpet Discs, brand new in box
- ✔️ Set of 4 stainless steel carpet discs for GAIA speaker isolators on carpeted floors
- ✔️ Available for GAIA I, GAIA II, or GAIA III — choose the size that matches your model
- ✔️ 0.6" spikes help anchor through carpet pile for a more stable support surface
- ✔️ Backed by a 2-year manufacturer's warranty in Canada
- ✔️ Genuine IsoAcoustics DELOS 1815W1 walnut isolation platform, brand new in box
- ✔️ Thick 1 3/4" walnut butcher block with 4 integrated isolators
- ✔️ Designed for high-end turntables and sensitive audio components up to 65 lbs (29.5 kg)
- ✔️ Helps lower the noise floor and reduce structure-borne vibration for greater clarity and detail
- ✔️ Backed by a 2-year manufacturer's warranty in Canada
