Replacement Feet for Marantz 22xx/23xx/4xxx Receivers, Set of 4

A set of four new replacement feet for 1970s Marantz receivers, moulded to the original factory dimensions and supplied with the correct screws.

Why replace them

The original feet on a 1970s Marantz were moulded in polyethylene, and fifty years under a heavy receiver is more than most of them were built for. They split, crack at the screw hole, or go missing one at a time until the receiver rocks on the shelf. A cracked foot looks small, but it is the first thing a buyer turns the receiver over to check, and the receiver should sit level and steady on all four.

What these are

These are new feet in Nylon 6/6, which is much tougher than the original material and far less prone to cracking with age. They are made to the factory size, 26.5 mm across and 18.5 mm high, so the receiver stands at its original height and the feet sit in the original locations without any modification. Each set comes with four black M4 x 10 mm screws, the factory-correct size, with flat and split washers built in, ready to mount straight onto the receiver’s own chassis.

What they fit

The 22xx, 23xx and 4xxx series receivers from the 1970s, and the heavier Marantz components of the same era. If you are not sure about your unit, send us the model number and we will tell you.

On one of our cabinets

The same feet fit the base of our own Marantz wood cabinets, mounted with the longer screws we stock for the cabinet base. If you are buying one of our cabinets, a set can be added to the order and fitted before it ships.

Add our felt pads

Our Radique Audio High Density Felt Pads are 1 inch across, a near-exact match for the base of these feet. One pack of 8 covers a set of four with four spares. They protect the furniture underneath and quiet the receiver on a resonant shelf.

The first thing a buyer checks when they turn a Marantz over, put right.

Available for pickup in Kanata by appointment, or shipped anywhere in Canada for a flat $10. Shipping outside Canada, including the United States, is at live carrier rates: add the feet to your cart, then enter your city and postal code on the cart page to see them. Bought with one of our Marantz cabinets, the feet travel in the cabinet’s box at no extra shipping cost.

Replacement feet for 1970s Marantz receivers Specifications

• Quantity: set of 4 feet, with 4 screws
• Fits: Marantz 22xx, 23xx and 4xxx series receivers (1970s) and heavier Marantz components of that era
• Material: Nylon 6/6
• Size: 26.5 mm (1.04 in) diameter x 18.5 mm (0.73 in) high
• Screws: M4 x 10 mm, black, with built-in flat and split washers, for mounting on the receiver chassis
• Made in: USA
• Condition: new

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.