made in usa
Showing all 11 resultsSorted by price: high to low
Thiel CS2.2 Floorstanding Speakers – Refinished, Made in USA
- ✔️ Jim Thiel's time-coherent three-way — sloped baffle, first-order 6dB/octave crossover, built in Lexington, Kentucky
- ✔️ Professionally refinished real wood veneer cabinets with replaced top caps
- ✔️ 1″ aluminium dome, 3″ midrange, 8″ woofer and 6″×9″ passive radiator — 33Hz–27kHz
- ✔️ 4-ohm load (3 ohms min), 86dB, 50–250W recommended — rewards a current-capable amplifier
- ✔️ Tested and working, backed by our Bumper to Bumper Warranty and Perpetual Trade-Back Program
NHT Evolution T5 Tower System – M5 + B5, A1 Amps, X1 Crossover
- ✔️ Complete NHT Evolution T5 system — 2× M5 three-way monitors, 2× B5 powered bass modules, 2× A1 250W monoblocks, 1× X1 active crossover
- ✔️ Four-way tower, 26Hz–30kHz (±3dB), >114dB SPL peak, side-firing 12″ aluminium woofers — no separate subwoofer needed
- ✔️ Made in the USA · 43″ tall, 72 lb per channel · includes NHT's full configuration manual
- ⚠️ Highly configurable, not plug-and-play — best suited to someone who enjoys tuning a system to their room
- 🚚 Too large for standard courier — personal delivery in the Windsor–Québec City corridor, or skid freight Canada-wide
Audionics of Oregon CC-2 Stereo Power Amplifier 70 WPC — USA
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Original Large Advent 2-Way Bookshelf Speakers, USA-Made
Rectilinear XI Speakers — Lattice Grilles, Walnut, Recapped, USA
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.
Tara Labs RSC Prime Bi-Wire Speaker Cables — 15′ Pair, Bananas
Cerwin Vega E-310 Towers – 95dB, 10″ 3-Way, USA-Made, Refoamed
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
Boston Acoustics Micro 90C Center Channel Speaker — Made in USA
Dual 3.5-inch copolymer woofers flanking a 1-inch dome in a sealed cabinet rather than a ported one, which is why it can sit inside a cabinet or flat on a display without the boundary colorations a port brings. 100 Hz to 22 kHz, 90 dB, magnetically shielded, gold-plated 5-way posts. Made in USA; very good condition.
















































