Technics 7-Band Graphic Equalizer – Made in Japan SH-8038
$145.00
Out of stock
Email when stock available
Technics SH-8038 7-Band Graphic Equalizer – Made in Japan
Enhance your audio system with the Technics SH-8038, a versatile 7-band stereo graphic equalizer crafted in Japan. Designed for precise sound shaping, this equalizer offers detailed tonal control for any hi-fi or home theater setup and has undergone our Level One service and testing which should ensure many more years of reliable performance ahead.
With a user-friendly interface and robust build, the SH-8038 allows you to tailor your music to your room and preferences. Its high signal-to-noise ratio and ultra-low distortion ensure clean, transparent sound, while the classic Technics styling makes it a perfect match for vintage and modern systems alike.
Key Features:
7-band stereo graphic equalizer for precise sound tuning
Bands at 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, and 16kHz
±12dB control range per band for flexible adjustment
Exceptionally low total harmonic distortion (0.005%)
High signal-to-noise ratio (100dB)
Dual-channel operation for true stereo equalization
Black or silver metallic finish options
Made in Japan
Specifications:
Frequency response: 5Hz–100kHz (–3dB, center position)
Signal-to-noise ratio: 100dB
Total harmonic distortion: 0.005% (20Hz–20kHz), 0.003% (1kHz)
Input sensitivity: 1V
Input impedance: 33kΩ
Maximum input/output voltage: 7V (1kHz)
Rated output voltage: 1V
Gain: 0 ±1dB
Power supply: AC 120V 60Hz
Power consumption: 7W
Dimensions: (Width x Height x Depth) 17 x 3 x 7.6 inches (430 x 75 x 192.5 mm)
Weight: 4.1 lbs (1.85 kg)
The Technics SH-8038 is an ideal upgrade for music lovers seeking hands-on control and Japanese engineering quality. Add this reliable equalizer to your system and enjoy fine-tuned sound for years to come.
Asking $145; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 7 lbs |
|---|---|
| Dimensions | 12 × 21 × 7 in |
Related Products
Yamaha Q2031 Dual 31-Band Graphic Equalizer – Made in Japan, 2U
Thirty-one bands per channel on ISO third-octave centres, 20Hz to 20kHz, on two fully independent channels — fine enough to pull a single room mode down without touching what sits either side of it. A range switch halves boost and cut to ±6dB for careful work, and the high-pass filters sweep from 20 to 200Hz. Balanced XLR and 1/4-inch throughout, 2U rack. Condition good.
Nikko EQ-II 6-Band Stereo Graphic Equalizer Made in Japan
Six sliders a channel at 40Hz, 125Hz, 400Hz, 1.25kHz, 4kHz and 12.5kHz, each with 12dB of boost or cut, and a bypass switch for an instant A/B against the unprocessed signal. 0.01% distortion, better than 100dB signal to noise, 10Hz to 30kHz — it adds nothing of its own. Built in Tokyo between 1977 and 1981. Excellent condition, fully tested.
Nikko EQ-500 6-Band Stereo Graphic Equalizer Made in Japan
Six sliders a channel at 40, 125, 400, 1,250, 4,000 and 12,500 Hz, each giving 12 dB of cut or boost in 2 dB steps. Distortion is 0.01%, signal-to-noise better than 100 dB, response 10 Hz to 30 kHz — it adds nothing of its own. Bypass switch and a pre/post-EQ tape loop. Made in Japan. Cosmetic condition fair; fully tested and working.
Teac GE-20 2-Channel 10-Band Stereo Graphic Equalizer, Japan
Ten ISO-standard bands per channel from 31.5 Hz to 16 kHz at ±12 dB, with separate left and right sliders and switchable VU metering. Filters at 31.5 Hz and 16 kHz roll off rumble and ultrasonic noise without touching the audible band, and an EQ defeat switch lets you A/B against flat. Made in Japan, 1978; serviced, good cosmetic condition.
