Showing 13–21 of 21 resultsSorted by price: high to low
High Quality, Well-Reviewed B&W Satellite speakers VM1
A two-way vented-box satellite: 125mm cone bass/mid, 25mm high-frequency unit, crossed at 3.5 kHz, 91 dB into 8 ohms. Magnetically shielded, 20.6 inches tall on a footprint under five inches wide. Each speaker comes with its own all-metal shelf stand for horizontal or vertical placement, no extra hardware needed. They retailed around $600 Canadian.
23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair
A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.
Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black
42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.
Paradigm S-30 29″ Speaker Stands, All-Metal Pair, Black
Heavy die-cast aluminium bases under rectangular steel columns you can fill with dry sand or shot, and a cable channel run up the inside so the speaker wire never shows. The steel top plates measure about 5.5 by 5 inches and carry isolation pads. Fitted here with Radique high-density felt feet for hard floors; spikes can still be added later. Very good condition.
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair
Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.
Athena 31.5″ All-Metal Speaker Stands, Heavy Bases, Pair
All-steel columns on wide weighted bases, 31.5 inches tall and 10 lbs each, with cable routed through the hollow centre column. Athena built them as the partner for the S.5, so the original screws for the S.5's rear threaded inserts are included; on anything else the 5 by 3.25 inch top plate takes pads or putty. Radique Audio high-density felt feet fitted. Designed in Toronto; very good condition.
B&W 24″ Dual-Pillar All-Metal Speaker Stands, Pair, Like-New
Twenty-four inches, which puts a bookshelf tweeter at seated ear height, on twin steel pillars that are hollow and meant to be filled — sand or shot adds 10 to 15 lb a stand. The complete original spike set is here, top plate and bottom, though the pair currently wears Radique high-density felt feet for hard floors. Assembled and ready. Excellent cosmetic condition.