API Tri-Pillar All-Metal Speaker Stands, 21.5″, Pair
$145.00
Out of stock
Email when stock available
API Tri-Pillar All-Metal Speaker Stands, 21.5″, Pair
A good-condition pair of very heavy, all-metal API tri-pillar speaker stands — 21.5 inches tall, with three substantial steel pillars per stand, generous top plates, large rectangular bases, and Radique Audio High Density Felt Feet fitted for hard floors, plus included carpet spikes for use on rugs or carpeted rooms.
Each stand uses a three-column (tri-pillar) design with thick steel tubing, giving these stands a noticeably more massive, inert feel than typical single- or dual-pillar designs in this height range. The tri-pillar layout spreads the load and resists rocking, making them particularly well-suited to heavier bookshelf speakers and compact monitors. The top platforms measure 7.25 x 7.5 inches, providing ample support for a wide range of standmount speakers while keeping the footprint visually tidy. The bases measure 11 x 12.75 inches, giving the stands a broad, stable foundation that feels secure underfoot even with heavier speakers.
This pair is fitted with Radique Audio High Density Felt Feet on the bases, making them a safe, floor-friendly option for hardwood, laminate, vinyl, or tile. For carpeted rooms, a matching set of carpet spikes is included, allowing the next owner to choose between felt-on-hard-floor or spiked-on-carpet installation. The stands present in overall good cosmetic condition: structurally excellent and very sturdy, with some cosmetic roughness and visible wear on the base plates that won’t be obvious at typical listening distance but should be expected on close inspection.
Product highlights:
Heavy all-metal tri-pillar speaker stands (pair)
21.5-inch height — ideal for many compact bookshelf speakers and small monitors
Three thick steel pillars per stand for excellent rigidity and stability
Large steel top platforms: 7.25 x 7.5 inches
Large steel bases: 11 x 12.75 inches for a broad, stable footprint
Radique Audio High Density Felt Feet installed for hard floors
Matching carpet spikes included for use on rugs or carpet
Suitable for heavier bookshelf speakers and compact monitors
Condition: Good overall, with some cosmetic wear on the bases
Dimensions per stand:
Height: 21.5 inches (546 mm)
Top plate: 7.25 x 7.5 inches (184 x 191 mm)
Base: 11 x 12.75 inches (279 x 324 mm)
Weight per stand: 13 lbs (5.9 kg), Weight per pair: 26 lbs (11.8 kg)
These heavy, all-metal API tri-pillar stands in good condition, fitted with Radique Audio High Density Felt Feet and supplied with carpet spikes, offer a very stable, confidence-inspiring platform for serious bookshelf speakers and small monitors, with a footprint and height that work well in real-world rooms.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 28 lbs |
|---|---|
| Dimensions | 16.75 × 24 × 25.5 in |
Related Products
Angled 16″ Metal Speaker Stands – Compact, Solid Metal
Sixteen inches tall, with angled pillars that still keep the top platforms level and parallel to the floor. The platforms measure about 6.75 by 6.25 inches and the bases 12 by 10, so they hold a compact bookshelf or a satellite steadily without taking much floor. Radique high-density felt feet fitted. Very good condition, light honest wear only.
Attractive 22.5″ Speaker Stands — Glass & Metal, Black
Tempered glass top plates on a metal column and base, 22.5 inches tall and rated to 22 lbs a speaker. Cable runs concealed inside the column, and the floor spikes are height-adjustable — currently swapped for Radique Audio high-density felt feet, so they go straight onto hardwood or tile. Top plate 7.75 inches square, base 9.75. Very good condition.
Sturdy Metal Speaker Stands by Atlantis 23″ — Canada | Felt Feet
Twenty-three inches to the top plate, with a 7 by 7 inch platform on an A-style base measuring 14 by 10.5 inches — a wide enough footprint that a bookshelf speaker on top is not going anywhere. Built in Canada by Atlantis, 4.8 lbs each, black. Fitted with Radique high-density felt feet, so they go straight onto hardwood or tile.
Paradigm J-60 26″ Fillable Welded Steel Speaker Stands – Pair
Three welded steel columns rising from a 12 by 12 inch base to a 7.5 by 9 inch top plate — the stand Paradigm sold for the Studio 20 and the Active 20. The columns are hollow and meant to be filled: a bag of dry play sand roughly doubles their mass and stops the ringing. Supplied unfilled, with felt pads fitted and the original spikes included. Very good condition.
Three-Post 23″ Steel Speaker Stands – Cable Routing, Spiked
The largest of the three posts is hollow, so speaker wire drops in at the top plate and comes out at the base instead of trailing across the floor. A 10 x 12 inch base under a 23 inch column, a 5 x 6.5 inch top plate, 50 lbs per stand, and threaded adjustable spikes with rubber caps. Sold as a pair.
23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair
A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.
Paradigm S-30 29″ Speaker Stands, All-Metal Pair, Black
Heavy die-cast aluminium bases under rectangular steel columns you can fill with dry sand or shot, and a cable channel run up the inside so the speaker wire never shows. The steel top plates measure about 5.5 by 5 inches and carry isolation pads. Fitted here with Radique high-density felt feet for hard floors; spikes can still be added later. Very good condition.
Atlantic 29″ Bookshelf Speaker Stands, Carbon-Look Bases, Pair
Twenty-nine inches of steel column on a 10.75-inch composite base, with a 6 x 6 top plate that rotates through 45 degrees so you can toe the speakers in. Speaker wire runs inside the column. Rated to 20 lbs a stand. Fitted here with Radique Audio high-density felt feet for hard floors, and the removable carpet spikes are included. Condition very good.
Omage 42.5″ Dual-Pillar Speaker Stands – Matte Black
42.5 inches to the top plate, solid metal on two pillars, with the cable run hidden inside so nothing shows at the back. The top plate is 6.75 inches square on a 12.25 by 9.5 inch base, 10 pounds a stand. Spikes come with removable rubber covers — caps on for hardwood, off for carpet. Matte black; excellent condition.
