Sansui SE-7 Black 10-Band Stereo Graphic Equalizer, Japan

$195.00

A black-faced ten-band-per-channel graphic equalizer from Sansui’s strongest years, built in Japan between 1979 and 1982, and a far more serious instrument than the tone controls it was meant to replace.

✔️ Condition: Very Good — works perfectly; ONE slider knob is an aftermarket replacement, disclosed in the copy
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping

Out of stock

Other equalizers in stock now

This one has sold. Want first dibs on the next one?

We take these in regularly. Leave your name and email, and we’ll email you the moment one is listed, so you hear first. No cost, no obligation.

Email me when one is listed

How First Dibs works →

How we get a component ready for sale. What our bench covers →

Read the full listing and see all 3 photos ↓

Other equalizers we have in stock now

3 in stock · $125.00–$175.00 · all ship

How we get a component ready for sale.

Before a used or vintage component is listed, it goes through our bench, and anything we service is tested again by a different tech. See exactly what our bench covers.

What our bench covers →
Description

A black-faced ten-band-per-channel graphic equalizer from Sansui’s strongest years, built in Japan between 1979 and 1982, and a far more serious instrument than the tone controls it was meant to replace.

Twenty sliders in all, ten to a side, at 32, 63, 125, 250, 500 hertz and 1, 2, 4, 8 and 16 kilohertz, each offering twelve decibels of cut or boost. Ten bands per channel is what separates an equalizer you can genuinely solve a room with from one that merely tilts the sound. With roughly an octave between centers you can pull down a boom at 63 hertz without touching the weight at 125, or lift presence at 4k while leaving sibilance at 8k where it belongs. The left and right banks work independently, which matters more than it sounds — few rooms are symmetrical, and the side of the room with the bookshelf does not behave like the side with the window.

The engineering underneath is better than this category usually gets. Signal-to-noise is rated at 110 decibels, distortion at 0.008 percent, and frequency response runs from 10 hertz to 100 kilohertz. Those figures describe a component designed to pass the signal through untouched when the sliders sit flat, which is the whole trick with an equalizer: the good ones do nothing at all until you ask them to.

The switching is more thoughtful than most. The equalizer can be taken out of circuit entirely, placed in the listening path, or applied to what you are recording, so you can correct a bright record on its way to tape without living with that correction the rest of the time. Two complete tape monitor loops let you keep two decks connected with full monitoring and dubbing between them.

In black, this is a machine that disappears into a rack and then announces itself the moment you switch on — twenty slider caps in two even rows across a full-width panel is one of the more satisfying looks the era produced.

Condition is Very Good and worth describing precisely. It works perfectly and every band does what it should. One slider knob has been replaced at some point with an aftermarket part rather than the original Sansui cap. It sits correctly and moves correctly, and across a row of twenty sliders it does not draw the eye — the unit presents well on a shelf. But it is not original, and you should know that before it arrives rather than after.

A few relevant specifications:

A properly capable equalizer from a marque that earned its reputation honestly, at a fraction of what the same capability costs new.

Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.

Sansui SE-7 10-band stereo graphic equalizer, black Specifications

  • 10 bands per channel, 20 total
  • Band centers: 32, 63, 125, 250, 500 Hz, 1, 2, 4, 8, 16 kHz
  • Control range ±12 dB per band
  • Frequency response 10 Hz to 100 kHz
  • Signal-to-noise ratio 110 dB
  • Total harmonic distortion 0.008%
  • Input sensitivity 1 V; output level 1 V, 5 V maximum
  • Equalizer off, on and record switching
  • Two complete tape monitor loops with dubbing
  • Made in Japan; produced 1979–1982
  • Dimensions: (Width x Height x Depth) 16.9 x 6.3 x 10.8 inches (430 x 159 x 275 mm)
  • Weight: 9.9 lbs (4.5 kg)

🎚️ Gold Series RCA Interconnects

Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉

⚠️ Important Information for International Buyers

This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.

Additional information
Weight11.9 lbs
Dimensions14.8 × 20.9 × 10.3 in
About brand
Sansui at Radique
We service Sansui, too. Bring us your own Sansui receivers, amplifiers, tuners, cassette decks and turntables for repair, servicing or restoration (solid-state gear; we don't take in tube equipment), with a 90-day warranty on the work. See our Audio Service page

Sansui was founded in Tokyo by Kosaku Kikuchi, who began making transformers in 1944 and incorporated Sansui Electric in 1947. We carry Sansui stereo receivers, integrated amplifiers, tuners, equalizers and cassette decks. We've had more than 40 Sansui listings so far. Every used Sansui here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Sansui models we've sold more than once include the RG-700 and SE-1000 equalizers.

The Sansui story, 1947 to today

Kosaku Kikuchi started making transformers in Tokyo in 1944 and founded Sansui Electric in 1947. Amplifier kits and finished amplifiers followed from 1954, tube receivers from 1956, and the AU-111 tube integrated amplifier in 1965.

The golden age. Solid-state amplifiers such as the AU-555 arrived in the late 1960s. In the 1970s Sansui made QS four-channel receivers and big stereo receivers such as the 9090DB, and from 1978 DC amplifiers such as the AU-717 and AU-919 and the G-series receivers.

New owners. In 1989 Polly Peck of London took control of Sansui. In the 1990s a controlling interest passed to the Semi-Tech group of James Ting, a Canadian businessman whose electronics company was based in Markham, Ontario, and Grande Holdings of Hong Kong took over in 1999.

After the original company. Production wound down in the early 2000s, and Sansui filed for court rehabilitation in 2012 and went bankrupt in 2014. Products sold under the Sansui name since then are made by licensees in different countries, not by the original company.

Which Sansui is which?

Tube era (1950s to 1960s): kits and amplifiers such as the AU-111 of 1965.

1970s receivers: such as the 8080 and 9090DB, the 1976 "No. 1 Line" from the 221 to the 881, and the QRX four-channel receivers.

Integrated amplifiers: the AU-555 of the late 1960s, the AU-x07 and AU-x17 families from 1978 such as the AU-717, the AU-919, budget A-series models, and the AU-α907i of 1987.

G-series receivers (1978 to 1980): from the G-2000 to the G-33000, with quartz-locked digital tuning on the later G-x700 models.

Tuners and equalizers: such as the TU-9900 and T-510 tuners, the SE-9 and SE-1000 equalizers, and the RG-700 and RG-707.

Cassette decks: SC, D and D-X series decks.

Buying used Sansui: what to check

Fuse resistors. A technician who restored a 9090DB for Sound & Vision called replacing the fusible resistors on the driver board the number one job, and restorers find fuse resistors gone high in value on other models.

Capacitors and glue. TONE Audio says AU-717s will probably need most of their capacitors replaced, and that the glue used at the factory has become corrosive and should be removed. Ask for proof of any recap.

No relay click. If the protection relay doesn't click in, an output may have DC on it, which often means failed output transistors.

Controls and lamps. Scratchy volume and balance controls need cleaning, and dial lamps are often converted to LED.

Later products. Goods sold as Sansui since the early 2000s were made by licensees, so don't expect vintage Sansui engineering in them.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.