

Denon DRA-295 Stereo Receiver – 50 WPC, Original Remote
$145.00
Out of stock
Get first dibs on the next one
The DRA-295 is your affordable ticket to genuine Denon stereo sound — a dependable, no-nonsense receiver built around Denon’s Signal Level Divided Construction chassis for clean, uncoloured reproduction at an accessible price point.
Denon’s Signal Level Divided Construction employs separate circuit blocks for handling low-level and high-level signals, physically isolating stages that would otherwise interfere with one another. This smart design helps the DRA-295 preserve signal purity and deliver music with greater fidelity and clarity than its modest price would suggest. The 50 watts per channel rating into 8Ω comes with impressively low 0.08% distortion, and 4-ohm speaker capability gives you the flexibility to pair this receiver with a wide range of speaker types.
The integrated AM/FM tuner features 40 presets for easy access to your favourite stations. This receiver accepts inputs for up to 5 components — 2 audio-only inputs and 3 A/V inputs with composite video switching — giving you real flexibility to build out a modest home entertainment setup. Two sets of speaker outputs, controllable from the front panel or remote, allow you to run speakers in two different rooms or switch between two pairs in the same room, and preamp outputs provide a path for future upgrades or multi-room expansion. Binding post speaker connectors accept bare wire, spades, or banana plugs.
This unit is in good condition and has been thoroughly inspected and tested to confirm full functionality. It includes the original Denon remote control and a soft copy of the owner’s manual in PDF format.
Type: AM/FM stereo receiver
Power output: 50 WPC into 8Ω (20 Hz–20,000 Hz, 0.08% THD)
Speaker impedance: 4Ω to 16Ω
Signal Level Divided Construction chassis
Tuner: AM/FM, 40 presets
Inputs: 2 audio, 3 A/V (composite video switching) — 5 components total
Speaker outputs: 2 pairs, front-panel and remote switchable
Speaker connectors: Binding posts (bare wire, spade, or banana plug compatible)
Pre-out: Yes
Headphone jack: Yes
Remote: Original Denon remote included
Manual: Soft copy (PDF) included
Dimensions: (Width x Height x Depth) 17.125 x 5.8125 x 16.4375 inches (435 x 148 x 418 mm)
Weight: 20.2 lbs (9.2 kg)
A solid, affordable entry into genuine Denon sound quality — simple to use, well-built, and ready to power a stereo system for years to come.
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program, you can purchase with confidence.
| Weight | 25 lbs |
|---|---|
| Dimensions | 21 × 21.5 × 9 in |
Related Products
Sherwood S-7250 CP Vintage Stereo Receiver – 20 WPC, Phono
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
Luxman R-117 Vintage Stereo Receiver – 160 WPC, MM & MC Phono
Aurex SA-5000 Vintage Stereo Receiver – 50 WPC, Toshiba, Japan
JVC RX-307 Stereo Receiver – 80 WPC, Original Remote & Manual
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Marantz 2245 Vintage Stereo Receiver – 45 WPC, Level 1 Serviced
A Marantz 2245 from the golden age of the receiver, serviced on our bench and wearing its original Marantz case.
✔️ Condition: Very Good — original vented woodgrain case, sound
✔️ Level 1 service on our own bench, with post-service testing
✔️ 45 WPC · MM phono stage · tape loop · pre-out / main-in · two speaker pairs
✔️ Made in Japan — confirmed on the rear rating plate
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Ottawa Valley cherry cabinet available to order
Onkyo TX-906 Stereo Receiver – 80 WPC, Dolby Pro Logic
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
✔️ Good condition — works as it should; the black cabinet and faceplate present well
✔️ Through our Level 1 service — cleaned, deoxidized, checked and thoroughly tested on our bench
✔️ Phono input for your turntable, plus CD and two tape inputs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Kenwood KR-A4070 Stereo Receiver – 60 WPC, Phono, Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.








