Denon DRA-835R Vintage Stereo Receiver – 100 WPC, Made in Japan

$445.00

The second-from-the-top model in Denon's early-nineties stereo receiver range, made in Japan and in very good condition, with 100 watts per channel, a phono stage, motorized volume and its original remote.

✔️ Very good condition — free of significant marks
✔️ 100 WPC, MM phono and motorized volume — made in Japan
✔️ Original Denon remote included
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping

1 in stock

Description

The second-from-the-top model in Denon’s early-nineties stereo receiver range, made in Japan and in very good condition, with 100 watts per channel, a phono stage, motorized volume and its original remote.

What it is

Denon introduced the DRA-835R in 1991 as second in command of its stereo receiver series, which ran from the flagship DRA-1035R down through the 835R, 635R, 435R and 335R. Only the flagship sat above it. The 835R delivers 100 watts per channel into 8 ohms and carries the New Optical Class-A badge on its front panel. It is a receiver built for a proper two-channel system: an MM phono input for your turntable, two full tape loops, a Source Direct switch that takes the tone controls out of the signal path, and pre-out and main-in jacks with a Normal/Separate switch, so the preamp and power amp sections can be split to add an equalizer, a processor or a bigger power amplifier later.

The volume knob is motorized, so it turns by itself when you adjust the level from the original remote, which is included. The AM/FM tuner stores 40 presets, takes direct station entry from a numeric keypad, and has a selectable IF band for pulling in weak or crowded stations. Around the back are A and B speaker pairs on 5-way binding posts that take bare wire, spades, pins or banana plugs (we recommend our own Radique Audio gold-plated banana plugs, and our Custom Speaker Cable Builder will make a pair to length), video jacks for a VCR and a disc player, and three AC outlets, one unswitched and two switched.

It sold new in 1991 for US$800, about $1,850 in 2026 Canadian dollars.

Condition

Very good, and free of significant marks, as the photographs show. The original Denon remote is included.

A powerful early-nineties Denon, made in Japan, with the power, phono and remote to anchor a two-channel system today.

Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.

Denon DRA-835R Specifications

  • Type: AM/FM stereo receiver
  • Power output: 100 watts per channel into 8 ohms
  • Amplifier: Denon New Optical Class-A
  • Phono: MM
  • Inputs: phono, CD, VDP (video disc), two tape loops, VCR audio
  • Pre-out and main-in: yes, with Normal/Separate switch
  • Controls: bass, treble, balance, variable loudness, Source Direct, record-out select
  • Tuner: AM/FM, 40 presets, numeric keypad, selectable IF band
  • Speakers: A and B pairs on 5-way binding posts (bare wire, spades, pins or banana plugs, including our Radique Audio banana plugs); 4–16 ohms (A or B), 8–16 ohms (A + B)
  • Headphones: front-panel jack
  • Volume: motorized, remote-controlled; original remote included
  • AC outlets: 1 unswitched, 2 switched
  • Power: 120 V, 60 Hz
  • Finish: black
  • Made in Japan, introduced 1991
  • Dimensions: (Width x Height x Depth) 17.1 x 5.9 x 16.2 inches (434 x 150 x 412 mm)
  • Weight: 23.8 lbs (10.8 kg)

🎚️ Gold Series RCA Interconnects

Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉

🔌 Speaker Cable, Built on Our Own Bench

The speaker terminals here are five-way binding posts, so they take banana plugs or spade lugs and you have the run of the options. We hand-build speaker cable here in any length you need — choose the gauge and the terminations on our Custom Speaker Cable Builder. If you would rather terminate cable you already own, we make our own gold-plated banana plugs and spade connectors as well. 👉

📶 Add Bluetooth — The RA-Twin II, Built For Exactly This

The DRA-835R was built before Bluetooth reached home stereo, and it does not need replacing to get it. Our own RA-Twin II adapter plugs into the CD or a tape input on the back and streams from a phone, tablet or laptop — nothing modified inside, and it comes with a starter cable so it works out of the box. If you want it done properly, the Gold Series RX Bundle pairs the adapter with our shielded Gold Series 3.5 mm to Dual RCA cable for less than buying the two separately. 👉

⚠️ Important Information for International Buyers

This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.

Additional information
Weight25.8 lbs
Dimensions20.2 × 21.1 × 9.9 in