Showing 25–34 of 34 resultsSorted by price: high to low
Gold Plated Banana Plugs by Radique Audio – Dual Set Screws
Dual set screws rather than a single screw or a compression sleeve, so the wire is held at two points and will not work loose behind the rack. Six-leaf gold-plated springs for a tighter grip in the binding post, full-length non-conductive jackets colour-coded for polarity, and gentle knurling that will not fray heavy cable. 19.4 g a pair, 25% heavier than the brand we used to carry. Fits 12 to 18 AWG.
Gold Plated Spade Connectors – Radique Audio, Dual Set Screws
Gold-plated solid brass, 13.3 grams apiece, with two set screws rather than one so the wire cannot back its way out. Takes 12 to 18 AWG — 12 is a tight fit but goes in with care — and fits posts up to 8 mm. Red and black anodized jackets, non-conductive, so a touch between them shorts nothing. Sold in 1, 2, 4 or 10 pairs.
Gold Plated Pin Connectors – Flexible Pins, Radique Audio
Made for spring clips and guillotine terminals, where bare wire frays and works loose. The pin flexes rather than sitting rigid, so it does not lever on a forty-year-old terminal, and two set screws hold the wire instead of one. Takes 12 to 18 AWG — 12 is a tight fit. Colour-coded non-conductive jackets and a textured grip. Sold in 1, 2, 4 or 10 pairs.
RA-Mini Compact Class D Amplifier – Tiny but Mighty
Tiny but mighty: a compact Class D stereo amplifier for passive speakers, in a 100 mm cube that fits in your hand.
- 50 W per channel into 4 Ω
- Five inputs: Bluetooth 5.0, RCA, 3.5 mm AUX, USB and microSD
- Silent, fanless and cool-running
- High gloss black or walnut finish
- 1-year warranty, Ottawa-based support
Gold Series Subwoofer Cable
Six layers around a 67-strand tinned copper core: PE insulation, aluminum foil, a 128-strand braided copper shield, a PVC jacket, and braided gold cotton mesh outside. 195 strands of 0.10 mm tinned copper in all, 7 mm outer diameter. Gold-plated RCAs in narrow alloy jackets that fit crowded back panels, with dual degaussing rings. Four lengths: 2, 3, 5 and 10 metres.
Gold Series RCA Stereo Interconnect | Radique Audio
Radique Audio Gold Series RCA Stereo Interconnect — dual RCA to dual RCA with vintage-safe, gold-plated connectors and 6-layer shielded construction. Featuring 262 strands of tinned copper, dual-layer copper and foil shielding, and slim narrow-profile connector barrels designed to fit tightly spaced vintage RCA jacks. Available in 0.2 m, 0.75 m, and 1.5 m lengths. Audiophile quality without the audiophile pricing.
Ultralink BitStream BTS-300 Portable DAC and Headphone Amp — New
A pocket-sized USB DAC with an integrated headphone amplifier, adding 300 mW of power for high-impedance headphones that a laptop or phone cannot properly drive.
Handles 16 to 24-bit audio from 44.1 kHz to 192 kHz, bypassing the noisy onboard sound card entirely. Aluminium housing, plug-and-play on Mac, PC and most Android devices, both cables included. New and unopened in retail packaging.
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Black Series Optical (Toslink) Cable
The second cable in Radique’s Black Series — an optical fibre core inside a flexible PVC layer and a soft braided mesh, with moulded strain relief boots at both ends and gold-plated connectors. It carries everything an optical connection supports: PCM stereo, plus Dolby Digital and DTS 5.1 surround (Dolby TrueHD and DTS-HD Master Audio need HDMI). Available in 1 m and 2 m. Budget optical cables tend to fail after a few connect-disconnect cycles; this one is built not to.
Gold Series Subwoofer Splitter – 8″
Eight inches of the same six-layer Gold Series cable — 195 tinned copper strands, braided copper shield, aluminum foil, gold cotton mesh outside — ending in a heavily reinforced three-element splitter module. It takes one subwoofer cable out to a dual-RCA subwoofer input, or to a dual-RCA sub output. Gold-plated plugs in narrow alloy jackets.
Gold Series Single RCA – 8″
Eight inches of single RCA, for the jobs a dual cable cannot do — a coaxial digital output into a DAC or AVR, or a preamp to a power amp whose channels sit at opposite ends of the chassis. Six layers of construction: 262 strands of tinned copper, a 128-strand braided copper shield, aluminium foil over that, and braided gold cotton outside. The plug jackets are narrow alloy, so they fit where standard RCAs will not.