Radique Audio Pin Connectors – Gold-Plated, Flexible Pin
$11.00 – $84.00Price range: $11.00 through $84.00
US orders: import duties and fees are added at checkout and prepaid by us, so there is nothing to pay at delivery.
Made for spring clips and guillotine terminals: a gold-plated pin that flexes instead of levering on old terminals.
- Two set screws hold the wire
- Colour-coded non-conductive jackets with a textured grip
- Takes 12 to 18 AWG speaker wire
- Packs of 1, 2, 4 or 10 pairs
- 1-year warranty
Made for spring clips
Bare wire frays and works loose in spring clips and guillotine terminals. Our pin connectors fix that, and the pin flexes, so it won’t lever on a forty-year-old terminal.
The short answer
Radique Audio pin connectors are gold-plated speaker cable connectors for spring-clip and guillotine terminals, common on vintage amplifiers and speakers. The pin is flexible rather than rigid, so it doesn’t stress older terminals; two set screws hold the wire; colour-coded non-conductive jackets have a textured grip. They take 12 to 18 AWG wire and come in packs of 1, 2, 4 or 10 pairs.
Which connector does your gear need?
All four share the same red and black colour coding, so polarity reads at a glance whichever ends you choose. Not sure what your gear takes? Look at the terminals on the back, or send us the make and model.
| Connector | Made for | Wire | Sold as |
|---|---|---|---|
| Banana plugs | Standard 5-way binding posts (most amps and speakers) | 12–18 AWG | 1, 2, 4, 5, 7 or 14 pairs |
| Spade connectors | Larger binding posts, up to 8 mm | 12–18 AWG | 1, 2, 4 or 10 pairs |
| Pin connectors (this one) | Spring clips and guillotine terminals | 12–18 AWG | 1, 2, 4 or 10 pairs |
| Bi-wire bridges | Replacing jumper plates on bi-wire speakers | Pre-made, 12 in | A set of 4 |
What makes them better
A pin that flexes
Rigid pins can lever on a spring clip and break an old terminal. Ours gives a little, which protects vintage gear.
Two set screws
The wire is anchored at two points, far more secure than single-screw or compression plugs.
No more frayed wire
A solid pin goes into the clip cleanly, every time, instead of strands that splay and short.
Colour-coded, non-conductive
Red and black jackets for polarity, safe if they touch, even in a dark rack.
A textured grip
The jacket won’t slip in your fingers when you’re working behind gear.
Part of a matched set
Pair them with our banana plugs at the other end, or let us build the whole cable.
Specifications
| Radique Audio pin connectors | |
|---|---|
| Pin | Gold-plated, flexible |
| Made for | Spring-clip and guillotine terminals |
| Wire | 12 to 18 AWG (12 AWG is a tight fit) |
| Wire fixing | Dual set screws |
| Jacket | Non-conductive, colour-coded red and black, textured grip |
| Tool needed | Small screwdriver |
| Sold as | 1, 2, 4 or 10 pairs |
| Warranty | 1 year (Radique Audio) |
Why buy it from us
Audiophile quality, fair price
Radique Audio is our own line: parts we spec, test and use every day in our shop, priced the way we’d want to pay.
A 1-year warranty
Every Radique Audio product carries a 1-year warranty: if it fails under normal use within the year, we replace it at no charge.
Pick up, or have it shipped
Collect it free in Kanata by appointment, or have it shipped across Canada and internationally: enter your city and postal code on the cart page for live rates. With one of our pre-owned speakers or components, it rides along at no extra shipping cost.
Real help from people who use it
Not sure what fits? Send us the make and model of your gear and we’ll tell you, including when you don’t need anything at all.
On video
Meet the people behind Radique Audio
Our introduction video: who we are, how we work, and why we started making our own gear.
How we pack your order
Cables and connectors ship in our high-quality Radique Audio bubble packs. If your order also includes speakers or other larger gear, everything is boxed up together in our 275 lb-test double-wall packaging, as in this video.
Questions we get about this one
Which terminals are they for?
Spring clips (press the tab, push the wire in) and guillotine terminals (the wire passes through a hole and a screw clamps down). Both are common on vintage receivers and speakers.
Will they fit your speaker wire?
They take 12 to 18 AWG. 18 to 14 AWG goes in easily; 12 AWG is a tight fit and goes in with care. Much thicker audiophile cable won’t fit; ask us and we’ll suggest an option.
How do they go on?
Strip the wire, twist the strands so none stray, slide it into the connector and tighten the two set screws with a small flat-head screwdriver. That’s all it takes.
Want a cable ready-made?
Our House CCA pair with pins and small spades connects two pieces of vintage gear with no bare wire at either end, and the Cable Builder puts pins on any length.
What warranty does it have?
A 1-year warranty, like every Radique Audio product: if it fails under normal use within the year, we replace it at no charge. See our warranty FAQ.
What does shipping cost? Is pickup possible?
Pickup in Kanata is free, by appointment. To have it shipped, add it to your cart and enter your city and postal code on the cart page: you’ll see live carrier rates before you commit. We ship across Canada and internationally. Buying it with one of our pre-owned speakers or components? Then it rides along in the same order at no extra shipping cost.
Do you ship to the United States?
Yes. On Radique Audio products we add the US import duties and fees at checkout and prepay them for you, so there’s nothing to pay at delivery.
Rather we built the whole cable?
Our Custom Speaker Cable Builder makes speaker cable to order, in any length, with these connectors on either end.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Quantity | Pair, 2 Pairs, 4 Pairs, 10 Pairs |
- Made to suit vintage gear
- Used every day in our own shop
- Speaker cable assembled by hand
- Audiophile quality without the audiophile price
Shop by family: Bluetooth & electronics · Speaker cables · Connectors · Gold & Black Series cables · Cabinets & stands · Gift coupons
Radique Audio is the house brand of Radique, the used and vintage hi-fi specialist. It began in 2020 with the original RA-Twin, a pocket-sized Bluetooth adapter that let our customers stream from their phones to the vintage receivers and amps we sell. Today the line runs from the RA-Twin II and the RA-Mini amplifier to Gold Series and Black Series cables, gold-plated connectors, hand-assembled speaker cable, new cherrywood cabinets for vintage Marantz, wood speaker stands and our magenta felt pads. We've sold well over 1,200 Radique Audio products so far. Our electronics, cables and connectors carry a one-year warranty, and our speaker stands carry five years.
Our five best sellers so far: the RA-Twin Bluetooth adapter (now the RA-Twin II), our gold-plated banana plugs, Gold Series RCA interconnects, our pin connectors and the Gold Series 3.5 mm to dual RCA cable.
The Radique Audio story, 2020 to today
It started with Bluetooth. Our first Radique Audio product was the original RA-Twin, in 2020: a small adapter that brings phone streaming to any stereo with a spare input, which is most of the vintage gear we sell. It became our best-selling product, and in 2025 the RA-Twin II took over with Bluetooth 5.4, three modes and up to 10 hours per charge.
Cables and connectors. Our Gold Series and Black Series cables followed in the summer of 2020, and our gold-plated banana plugs and pin connectors by the end of that year. Gold Series subwoofer cables came in 2021, the Black Series Toslink optical and Gold Series 1/4 to 1/8 inch TRS cables in 2022, our spade connectors in 2024 and the bi-wire speaker bridges in 2025.
The RA-Mini, our stands and our shirts. Our compact RA-Mini Class D amplifier, our wood speaker stands and the Radique Audio T-shirt all date back to the end of 2020, and the RA-USB charger joined the RA-Twin II in 2025.
Cherry cabinets for Marantz. Many vintage Marantz components were sold without their wood case. In 2026 we added new cabinets, built by our master woodworker in genuine Ottawa Valley cherrywood veneer over a stable particle board core: the WC-22 style for the 2220 through 2285B receivers, then the WC-10 style for 16 slim-chassis models such as the 1060, 1070 and 112, with more models coming. We build one-off cherry cabinets for other components too: see Ottawa Valley Cherry Cabinetry.
Speaker cable, made to order. In 2026 we opened the Custom Speaker Cable Builder (pick the cable, the length and each connector, and the price updates as you go) and added small spade terminations and small spade adapters for vintage gear whose terminals are too small for ordinary spades.
Which Radique Audio product do I need?
| If you want to… | Look at |
|---|---|
| Stream from your phone to a vintage stereo | RA-Twin II in RX mode, or the RX Bundle with our shielded Gold Series 3.5 mm to dual RCA cable |
| Hear your stereo or TV on Bluetooth headphones | RA-Twin II in TX mode, or the TX Bundle for a vintage amp's headphone jack |
| Drive a pair of passive speakers in a small room | RA-Mini: 50 W per channel into 4 Ω, Bluetooth, RCA, 3.5 mm, USB and microSD |
| Keep the RA-Twin II charged at the stereo | RA-USB, which plugs into the accessory outlet on the back of many vintage amps |
| Connect to standard five-way binding posts | banana plugs or spade connectors |
| Connect to spring clips | pin connectors, which flex instead of levering on old terminals |
| Connect to the small screw terminals on vintage gear | small spade adapters, or House CCA cable with small spade ends |
| Get speaker cable in the length you need | the Custom Speaker Cable Builder |
| Bi-wire, or replace bi-wire jumper plates | Quad bi-wire speaker cables and our bi-wire speaker bridges |
| Link components or run a subwoofer | Gold Series RCA interconnect, subwoofer cable or Y-splitter |
| Connect an optical digital output | Black Series Toslink cable |
| Dress a vintage Marantz that lost its case | WC-22 style or WC-10 style cherrywood cabinet |
| Lift bookshelf speakers to ear height | speaker stands, or a single stand for a center speaker |
| Protect a shelf under your components | magenta felt pads |
| Give it as a gift | a digital gift coupon, good toward anything on radique.com |
Still not sure? Email sales@radique.com with your gear, and we'll tell you what fits, or that you don't need anything at all.
What makes it Radique Audio
Made to suit vintage gear. Our Gold Series RCA plugs are slim and gentle on old jacks. Our pin connectors are made for spring clips, our small spades for the small screw terminals on vintage receivers and speakers, and the RA-Twin II plugs into the inputs almost every classic receiver and amp already has.
Used every day in our own shop. We use our banana plugs, cables and felt pads on the gear we test and demo every day, and our magenta felt pads go under the components we sell.
Built properly. Our banana plugs and spades hold the wire with two set screws, not one. Our Gold Series cables carry aluminum foil and braided copper shields under a gold cotton mesh jacket. Our speaker cables are assembled by hand, with heat-shrink reinforcing the ends and splits. Our stands are dowelled and glued maple, with no nails or screws.
Backed by us. Our electronics, cables and connectors carry a one-year warranty, and our speaker stands carry five years. The RA-Twin II and RA-Mini come with clear online manuals in English and French, and when you have a question, you email the people who chose the product: sales@radique.com.
What our customers say
“I just received my RA-Twin II today… I can't tell you enough how thrilled I am with this little but mighty product. I am using it to stream music from my laptop's 400+ GB collection to my Marantz 2220b, also sourced through the wonderful people at Radique. You people rock — keep up the good work!”
Kevin Spracklin, RA-Twin II · Google Reviews
“It is just a cable, a simple thing. Still, flawless build solves the irritating part of my desktop setup. I don't see the cable to the DAC, but I know it is there. And now I know that it is pretty. This matters.”
Ingvarr, Radique Audio Toslink Cable · Etsy
“I have never come across receivers with new cherry cabinets like this… like showroom new. Everything was exceptional!”
Peter, Pioneer SX-780 in our cherry cabinet · Etsy
More on our Customer Reviews page.
You may also like…
Radique Audio Banana Plugs – Gold-Plated, Dual Set Screws
Banana plugs that stay put: gold-plated, with two set screws holding the wire instead of one.
- Six-leaf gold-plated springs for a tight fit in the binding post
- Full-length non-conductive jackets, colour-coded red and black
- Fits 12 to 18 AWG speaker wire; 19.4 g a pair
- Packs of 1, 2, 4, 5, 7 or 14 pairs
- 1-year warranty
Radique Audio Spade Connectors – Gold-Plated, Dual Set Screws
Spades with a grip that holds: gold-plated solid brass, with two set screws on the wire.
- Fits binding posts up to 8 mm
- Red and black anodized jackets, non-conductive
- Takes 12 to 18 AWG; 13.3 g a spade
- Packs of 1, 2, 4 or 10 pairs
- 1-year warranty
Radique House CCA Cables, 10 ft Pair – Pin to Small Spade
Vintage to vintage, no bare wire: a 10 ft House CCA pair, pin connectors to small spades.
- Radique Audio pins for spring clips and guillotine terminals
- Small spades (forks) for #10 / M5 posts, double heat-shrink sealed
- Two Radique hook-and-loop cable straps included
- Hand-assembled in our shop
- 1-year warranty
Related Products
- Six-leaf gold-plated springs for a tight fit in the binding post
- Full-length non-conductive jackets, colour-coded red and black
- Fits 12 to 18 AWG speaker wire; 19.4 g a pair
- Packs of 1, 2, 4, 5, 7 or 14 pairs
- 1-year warranty
- 12 in (304 mm), high-purity copper in a black and red braided sleeve
- Gold-plated banana plugs and 3 mm spades; fits posts up to 8 mm
- Red and black anodized housings for polarity
- Assembled by hand; custom lengths on request
- 1-year warranty
- Fits binding posts up to 8 mm
- Red and black anodized jackets, non-conductive
- Takes 12 to 18 AWG; 13.3 g a spade
- Packs of 1, 2, 4 or 10 pairs
- 1-year warranty
- Hand-assembled in Ottawa
- 2 plugs at the amp, 4 at each speaker
- Braided sleeve, heat-shrink at every split
- Choose 5 or 10 ft
- Brand new
- 1-year warranty
- Dowelled and glued maple, rated to 150 lb of static weight
- 12 × 9 in platform on a 14 × 12 in base: check your center speaker fits
- Felt or silicone pads, your choice
- Hand-crafted in Victoria, BC
- 5-year warranty
Radique Audio Banana Plugs – Gold-Plated, Dual Set Screws
Banana plugs that stay put: gold-plated, with two set screws holding the wire instead of one.
Radique Audio Bi-Wire Speaker Bridges – Banana/Spade, Set of 4
Better bridges for bi-wire speakers: a set of four, banana at one end and spade at the other, to replace the stock jumper plates.
Radique Audio Spade Connectors – Gold-Plated, Dual Set Screws
Spades with a grip that holds: gold-plated solid brass, with two set screws on the wire.
Small Spade Adapters – Banana Plug or Bare Wire, Radique Audio
A red and black pair of adapters that let the small screw terminals on vintage gear take banana plugs or heavy speaker wire.
✔️ New — hand-assembled in our Ottawa shop
✔️ Gold-plated mini binding post to a small spade (fork) for #10 / M5 screws
✔️ Takes a banana plug or bare wire up to 12 AWG
✔️ One pair, two pairs or four pairs
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
Replacement Feet for Marantz 22xx/23xx/4xxx Receivers, Set of 4
A set of four new replacement feet for 1970s Marantz receivers, moulded to the original factory size in tough Nylon 6/6, with the correct screws.
✔️ New — Nylon 6/6, far tougher than the original feet
✔️ Factory size, mounts in the original locations, screws included
✔️ Fits Marantz 22xx, 23xx and 4xxx receivers
✔️ Expertly packed for safe shipping
Radique 16 AWG Quad Bi-Wire Speaker Cables – Braided, 5 or 10 ft
Bi-wiring, done properly: our 16 AWG OFC bi-wire speaker cables in 5 ft or 10 ft pairs: four conductors per cable under a braided sleeve, Radique Audio banana plugs at both ends.
Radique Audio Single Speaker Stand – Cherry or Black, 8 or 14 in
A single wood speaker stand, no nails, no screws: for a center speaker, in Light Cherry or Matte Black, 8 or 14 inches tall.
Radique 16 AWG Quad Bi-Wire Speaker Cables – Grey, 8 ft Pair
A matched pair of bi-wire speaker cables, 8 ft per cable: four colour-coded 16 AWG conductors in a slim grey jacket, terminated with our own gold-plated Radique Audio banana plugs.
✔️ Four 16 AWG conductors per cable, colour-coded
✔️ 2 plugs at the amp, 4 at each speaker
✔️ Heat-shrink at every split, gold-plated Radique Audio banana plugs
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping














