Polk Audio R40 Slim Tower Speakers, Pair – 3 Drivers, Shielded

$245.00

A pair of Polk Audio R40 slim tower speakers, video-shielded, with their grilles.

✔️ 3/4″ silk dome tweeter over two 5.25″ Dynamic Balance drivers
✔️ 50 Hz–20 kHz, 90 dB, 8 ohms
✔️ Handles up to 150 watts
✔️ Only 8.5 inches wide
✔️ 5-way binding posts that take banana plugs
✔️ Grilles included
✔️ Very good condition, tested on our bench
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping

1 in stock

Description

A pair of Polk Audio R40 slim tower speakers: video-shielded, and high-quality performance in a small footprint.

Condition: Very good: the black cabinets and grilles are free of significant marks. Both speakers tested on our bench. Grilles included.

Three drivers in a slim tower

With a 3/4″ silk dome tweeter for precise highs and two 5-1/4″ Dynamic Balance drivers for full, accurate mids and bass, the R40 will really deliver in your music or home theater system.

The slim, attractive, vented enclosure looks as great as it sounds, and boasts rubber surrounds and 5-way bindings suitable for banana plugs. Our gold-plated Radique Audio Banana Plugs are the connector we recommend, or order a finished pair to length from our Custom Speaker Cable Builder.

Polk Audio R40 Specifications

  • Type: 3-driver vented tower speaker, video-shielded
  • Tweeter: 3/4″ silk dome
  • Mid/bass drivers: two 5-1/4″ Dynamic Balance, rubber surrounds
  • Frequency response: 50–20,000 Hz (-3 dB)
  • Impedance: 8 ohms
  • Sensitivity: 90 dB
  • Power handling: up to 150 watts
  • Terminals: 5-way binding posts
  • Dimensions: 35-3/16″ H x 8-1/2″ W x 11″ D

See everything we have in stock from Polk Audio.

🔌 Speaker Cable, Built on Our Own Bench

The speaker terminals here are five-way binding posts, so they take banana plugs or spade lugs and you have the run of the options. We hand-build speaker cable here in any length you need — choose the gauge and the terminations on our Custom Speaker Cable Builder. If you would rather terminate cable you already own, we make our own gold-plated banana plugs and spade connectors as well. 👉

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.

$245.00
Additional information
Weight48 lbs
Dimensions40 × 12 × 15 in
Impedance8 Ω
Power Handling101–200 W
Sensitivity90–92 dB
Woofer Size5″ and under
About brand
Polk Audio at Radique
New Polk Audio, too, quoted direct from the Canadian distributor:
We service Polk, too. Bring us your own Polk speakers and subwoofers for repair, servicing or restoration (speakers up to 80 lbs each), with a 90-day warranty on the work. See our Audio Service page

Polk Audio began in Baltimore in 1972, founded by Matthew Polk, George Klopfer and Sandy Gross. Its SDA speakers of the 1980s used a cable between the left and right speakers to widen the stereo image. We carry Polk towers, bookshelf speakers, centre channels and subwoofers. We've had more than 180 Polk listings so far, covering more than 80 different models. Every used Polk here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Looking for new Polk? We also quote new Polk Audio direct from the Canadian distributor, with free shipping within Canada: request a quote below. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our five best-selling Polk models so far: the RTi10 towers, the PSW10 and PSW125 subwoofers, the RTi4 bookshelf speakers and the CSi3 centre.

The Polk story, 1972 to today

Matthew Polk, George Klopfer and Sandy Gross, graduates of Johns Hopkins, founded Polk Audio in Baltimore, Maryland, in 1972. The Monitor 7 of 1974 was their first model to succeed, and the Monitor 10 followed in 1976.

SDA. In 1984 Polk introduced SDA (Stereo Dimensional Array). A cable between the left and right speakers lets each one cancel the sound that crosses over to the wrong ear, for a wider stereo image.

Growth. Polk went public in 1986 and moved to new premises in Baltimore. It began moving manufacturing to Tijuana, Mexico, in 1988, and by 2012 Stereophile reported that Polk designed in the US and built in China.

New owners. Directed Electronics agreed to buy Polk in 2006. Polk later became part of Sound United, Masimo bought Sound United in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 2018 Legend series brought SDA back.

Which Polk is which?

Monitor (1970s to early 1990s): the Monitor 4, 5, 7, 10 and 12, with A, B and C revisions.

SDA (1984 to about 1991): the SDA-1 and SDA-2 families, CRS, SRS and the later "TL" models.

RTA (1979 to 1992): towers such as the RTA 11t, with two woofers and two passive radiators.

RT and RTi (2001 onward): Polk's lower-priced lines. Our best-selling RTi10 towers and RTi4 bookshelf speakers come from here.

CSi centres and PSW subwoofers: the CSi3 centre and the PSW10 and PSW125 subwoofers are among the Polks we sell most.

LSi (about 2001 to 2010) and LSiM (2011): Polk's flagship lines of that decade, followed by Signature (2016), Legend (2018) and Reserve (2021).

Buying used Polk: what to check

SDA cable. SDA speakers need the interconnect cable between them for the SDA effect, and early SDA models need a common-ground amplifier. Make sure the cable comes with the pair.

Tweeters. Owners report that some SL3000 tweeters on the 1989 to 1991 SDA TL models leaked their ferrofluid and failed, and that Monitor-series pairs may carry mismatched factory or replacement tweeters. Check that every tweeter plays.

Surrounds. Some early Polks used foam surrounds, which rot with age; later models such as the RTA 11t and LSiM use rubber. Press gently on each woofer surround.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.