JVC RX-5032V 5.1 AV Receiver, 100W/Ch, Optical & Coax In
$125.00
One hundred watts a channel into 8 ohms across all five, with Dolby Digital, DTS and Pro Logic II. The useful part is the setup depth: a five-position subwoofer crossover from 80 to 200 Hz and an LFE attenuation control, unusual at this price. Video switching is composite only, and there is no 5.1 analog input. The original remote is missing; a pre-programmed universal is included. Condition good.
1 in stock
JVC RX-5032V 5.1 AV Receiver, 100W/Ch, Optical & Coax In
A clean JVC RX-5032V audio/video control receiver in good cosmetic condition with the attractive silver finish, fully tested and ready to anchor a 5.1 home theatre or a serious stereo plus television setup.
The RX-5032V is JVC’s mid-line 5.1-channel AV receiver from 2003–2004, rated at a substantial 100 watts per channel into 8 ohms across all five amplified channels. It supports the major surround formats of its era — Dolby Digital, DTS, and Dolby Pro Logic II — with PCM stereo for direct CD playback, and JVC’s complement of music-room and theatre DSP modes for tailoring presentation to recording type and listening room. The unit is well regarded as a genuinely capable mid-range receiver that drives full-range floorstanders without strain and pairs equally well with smaller bookshelf and satellite/sub configurations.
Connectivity is generous and well-suited to mixed-source vintage and modern systems: five line-level analog audio inputs, one optical and one coaxial digital input (each switchable to any source), composite video switching across multiple inputs, dedicated subwoofer pre-out, AM/FM tuner with 45 station presets, headphone jack, and full 5-channel binding-post speaker outputs. The RX-5032V also offers a usefully deep set of front-panel adjustments rare in receivers of this price class — including a five-position subwoofer crossover (80, 100, 120, 150, 200 Hz) and an LFE channel attenuation control — making integration with a wide variety of subwoofers and main speakers straightforward and precise.
A few practical notes for prospective buyers: the RX-5032V predates HDMI, so video switching is composite only — a non-issue for stereo-plus-TV use or for anyone running an HDMI-equipped TV directly to its sources, but worth noting if you specifically need an HDMI-switching receiver. There is no 5.1 multichannel analog input, so the unit does not support legacy SACD or DVD-Audio multichannel direct connections; standard digital and stereo connections work normally. The original JVC remote is not included, but the unit ships with a pre-programmed 3rd-party RCA universal remote that has been confirmed to operate the receiver’s main functions reliably; for owners wanting deeper control, JVC remote codes for RCA universal remotes are widely documented online and easy to enter as an alternative profile if desired.
This unit is in good cosmetic condition and has been fully tested — all five amplified channels, both digital inputs, the AM/FM tuner, the composite video switching, the subwoofer pre-out, and the headphone output are all confirmed functional.
Specifications:
Type: 5.1-channel AV receiver
Power output: 100 W per channel x 5 (front L/R, centre, rear L/R) into 8 ohms
Frequency response: 20 Hz – 20 kHz
Total harmonic distortion: 0.8%
Signal-to-noise ratio: 87 dB (line)
Input sensitivity: 220 mV (line)
Surround formats: Dolby Digital, DTS, Dolby Pro Logic II, PCM, plus JVC DSP modes
Digital inputs: 1 x optical TOSLINK, 1 x coaxial RCA
Analog audio inputs: 5 x line-level (CD, DVD, VCR, Tape, AUX)
Video switching: Composite
Subwoofer crossover: Selectable 80 / 100 / 120 / 150 / 200 Hz
LFE attenuation: Yes
Tuner: FM and AM with 45 presets
Headphone output: 1/4 in. front panel
Speaker outputs: 5 x binding posts, plus subwoofer pre-out
Display: Fluorescent with dimmer
Remote control: Pre-programmed 3rd-party RCA universal (confirmed working with this unit)
Finish: Silver
Year of introduction: 2003
Dimensions (W x H x D): 17.1 x 5.8 x 16.1 inches (435 x 146.5 x 409.5 mm)
Weight: 19.4 lbs (8.8 kg)
A genuinely capable mid-range AV receiver — substantial 100 W/ch power, useful digital connectivity, and the kind of careful control set that lets you tune integration with subwoofers and a wide variety of speakers. An excellent choice for a home theatre rebuild, a vintage-meets-modern stereo with TV duty, or a rec-room setup that needs real headroom.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 22 lbs |
|---|---|
| Dimensions | 20.1 × 21.1 × 9.8 in |
You may also like…
Pyle PP999 Phono Preamp — Turntable to Line Level, New in Box
Puts a turntable back into a system that has no phono input. Turntable in, receiver out, on ordinary RCA cables — the signal arrives at line level ready for any AUX or CD socket on a modern amplifier.
Rear ground terminal for the turntable's ground wire, and the 12 volt power adapter is included. Metal alloy housing, 70 dB signal-to-noise, 20 Hz to 20 kHz ±2 dB. New and unopened in retail packaging.
Related Products
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
Onkyo TX-NR737 770W 7.2 Atmos 4K Wi-Fi Bluetooth THX AVR
