Denon DRA-295 Stereo Receiver — 50 WPC | Original Remote
$145.00
Out of stock
Email when stock available
The DRA-295 is your affordable ticket to genuine Denon stereo sound — a dependable, no-nonsense receiver built around Denon’s Signal Level Divided Construction chassis for clean, uncoloured reproduction at an accessible price point.
Denon’s Signal Level Divided Construction employs separate circuit blocks for handling low-level and high-level signals, physically isolating stages that would otherwise interfere with one another. This smart design helps the DRA-295 preserve signal purity and deliver music with greater fidelity and clarity than its modest price would suggest. The 50 watts per channel rating into 8Ω comes with impressively low 0.08% distortion, and 4-ohm speaker capability gives you the flexibility to pair this receiver with a wide range of speaker types.
The integrated AM/FM tuner features 40 presets for easy access to your favourite stations. This receiver accepts inputs for up to 5 components — 2 audio-only inputs and 3 A/V inputs with composite video switching — giving you real flexibility to build out a modest home entertainment setup. Two sets of speaker outputs, controllable from the front panel or remote, allow you to run speakers in two different rooms or switch between two pairs in the same room, and preamp outputs provide a path for future upgrades or multi-room expansion. Binding post speaker connectors accept bare wire, spades, or banana plugs.
This unit is in good condition and has been thoroughly inspected and tested to confirm full functionality. It includes the original Denon remote control and a soft copy of the owner’s manual in PDF format.
Type: AM/FM stereo receiver
Power output: 50 WPC into 8Ω (20 Hz–20,000 Hz, 0.08% THD)
Speaker impedance: 4Ω to 16Ω
Signal Level Divided Construction chassis
Tuner: AM/FM, 40 presets
Inputs: 2 audio, 3 A/V (composite video switching) — 5 components total
Speaker outputs: 2 pairs, front-panel and remote switchable
Speaker connectors: Binding posts (bare wire, spade, or banana plug compatible)
Pre-out: Yes
Headphone jack: Yes
Remote: Original Denon remote included
Manual: Soft copy (PDF) included
Dimensions: (Width x Height x Depth) 17.125 x 5.8125 x 16.4375 inches (435 x 148 x 418 mm)
Weight: 20.2 lbs (9.2 kg)
A solid, affordable entry into genuine Denon sound quality — simple to use, well-built, and ready to power a stereo system for years to come.
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program, you can purchase with confidence.
| Weight | 25 lbs |
|---|---|
| Dimensions | 21 × 21.5 × 9 in |
Related Products
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
Luxman R-117 Flagship Stereo Receiver — 160 WPC, MM & MC Phono
Aurex (Toshiba) SA-5000 Stereo Receiver — 50 WPC, Made in Japan
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
