Harman Kardon HK3700 Stereo Receiver – 85 WPC, Sub Out
$345.00
Eighty-five watts a channel into 8 ohms with a moving magnet phono stage, a subwoofer pre-out, and A and B speaker posts. Ethernet gives it DLNA and vTuner internet radio and the USB port takes iOS devices through its own 24-bit/192kHz DAC — network streaming on a receiver that still wants a turntable. Tested and working, HK remote included.
1 in stock
Harman Kardon HK3700 Stereo Receiver – Network Audio, USB for iOS, Phono, Sub Out
Enhance your listening experience with the Harman Kardon HK3700—a powerful, modern stereo receiver engineered for music lovers who appreciate both rich analog sound and the convenience of network streaming. This HK3700 has been thoroughly tested and works perfectly, complete with a Harman Kardon remote for convenient control.
Rated at 85 watts per channel into 8 ohms, the HK3700 delivers dynamic, accurate sound with substantial power and headroom for virtually any speaker system. Signature Harman Kardon high-current capability, a robust power supply, and discrete output devices offer tight, controlled bass and energetic performance.
Connect classic analog sources via multiple RCA line inputs and a high-quality moving magnet phono stage—perfect for turntables. The HK3700 also offers direct USB connectivity for streaming music from Apple iOS devices (using its internal 24-bit/192kHz DAC), plus an Ethernet port for streaming internet radio (vTuner) and local audio files over your home network via DLNA. Built-in FM/AM tuner is included for favorite radio broadcasts.
A dedicated subwoofer pre-out, full-size speaker posts, headphone output, and a clean high-contrast front-panel display round out its thoughtfully designed feature set.
Specifications:
- Power Output: 85W/ch (8Ω, 20Hz–20kHz, <0.07% THD) Class AB
- Frequency Response: 10Hz–130kHz
- Inputs: 5 x RCA line, 1 x phono (MM), Ethernet (DLNA/vTuner), USB (for iOS only), AM/FM antenna
- Outputs: Speaker A/B binding posts, subwoofer pre-out, headphone out
- Networking: Wired Ethernet (DLNA 1.5, vTuner internet radio)
- DAC: Built-in, 24-bit/192kHz for iOS/USB playback
- Remote: Harman Kardon remote included
- Display: High-contrast LCD
- Dimensions: 17.3″ x 4.75″ x 11.81″ (440 x 121 x 300mm)
- Weight: 13.2 lbs (6kg)
This Harman Kardon HK3700 offers robust power, versatile analog connectivity, and home network audio streaming—all with the classic reliability and sound signature the brand is known for.
Includes HK remote and a soft copy of the manual in PDF. Asking $345; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 18 lbs |
|---|---|
| Dimensions | 16.1 × 21.3 × 9.1 in |
Related Products
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
