JVC RX-307 Stereo Receiver – 80 WPC, Original Remote & Manual
$195.00
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
1 in stock
Eighty watts a side, a proper phono input, and the two things these almost never come with any more: the original remote and the printed manual.
That matters more than it sounds. A receiver from this era without its handset is a receiver you operate by walking across the room, because the remote controls functions that have no front-panel equivalent on most units of the period. Third-party replacements are a lottery. This one has the correct JVC RM-SR307U, and the manual that tells you what every button does.
The RX-307 comes from 1991, when JVC was building receivers with digitally synthesized tuning and real power supplies behind the badge. Eighty watts per channel into 8 ohms, and JVC rated that honestly — both channels driven, 40 hertz to 20 kilohertz, at under 0.03% distortion, which is a stricter way of quoting power than most of its competitors used. The amplifier is happy with anything from 8 to 16 ohms.
It is better equipped than the price suggests. Volume is motor-driven, so the remote turns the actual knob rather than working around it. There are two full tape loops with dubbing between them, two switchable speaker pairs, a surround mode, a headphone socket, and a switched AC outlet on the back for a turntable or a deck.
The tuner is a digital synthesizer design covering FM and AM, with ten presets, auto memory and an FM mode mute, read off a multi-function fluorescent display rather than an analogue dial. There is a moving-magnet phono input, so a turntable connects directly without a separate preamplifier — increasingly the deciding feature on a receiver of this age, and one that later models quietly dropped.
Round the back it carries COMPU LINK-3 Synchro, JVC’s system-control bus. With other COMPU LINK components the receiver switches sources and starts transports automatically, and the front panel wears the COMPU LINK Remote III badge to match.
The finish is black, and at just over seventeen inches wide and five high it sits neatly on a shelf without dominating it.
Condition is Very Good.
A few relevant specifications:
A well-specified early-nineties receiver that arrives complete — remote, manual and a phono stage — which is not how most of them turn up.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
JVC RX-307 stereo receiver Specifications
- AM/FM stereo receiver, model RX-307TN, digital synthesizer tuning
- Power output 80 watts per channel into 8 ohms, both channels driven, 40 Hz to 20 kHz, under 0.03% THD
- Frequency response 20 Hz to 20 kHz
- Signal-to-noise ratio 70 dB (MM phono), 91 dB (line)
- Input sensitivity 2.5 mV (MM phono), 200 mV (line)
- Moving-magnet phono input
- Motor-driven volume control
- COMPU LINK-3 Synchro system control; COMPU LINK Remote III
- Two tape loops with dubbing; CD and phono inputs
- Two switchable speaker pairs; front headphone socket
- Surround mode
- Ten tuner presets with auto memory and FM mode mute
- Bass, treble and balance controls
- Switched AC convenience outlet, 180 W / 1.5 A maximum
- Speaker load impedance 8 to 16 ohms
- FM 300-ohm and 75-ohm antenna inputs, AM loop
- Black finish
- Original JVC RM-SR307U remote control included
- Original printed owner’s manual included
- Dimensions: (Width x Height x Depth) 17.1 x 5.0 x 13.0 inches (435 x 126 x 330 mm)
- Weight: 18.3 lbs (8.3 kg)
🎚️ Gold Series RCA Interconnects
Our own Gold Series RCA Stereo Interconnect is a shielded, gold-plated stereo pair, in stock and ready to go. It is the cable that connects this to the rest of your system, and it is a straightforward upgrade on the free leads that come in the box with most equipment. 👉
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 20.3 lbs |
|---|---|
| Dimensions | 17 × 21.1 × 9 in |
You may also like…
Gold Series RCA Stereo Interconnect | Radique Audio
Radique Audio Gold Series RCA Stereo Interconnect — dual RCA to dual RCA with vintage-safe, gold-plated connectors and 6-layer shielded construction. Featuring 262 strands of tinned copper, dual-layer copper and foil shielding, and slim narrow-profile connector barrels designed to fit tightly spaced vintage RCA jacks. Available in 0.2 m, 0.75 m, and 1.5 m lengths. Audiophile quality without the audiophile pricing.
Related Products
Denon DRA-835R Vintage Stereo Receiver – 100 WPC, Made in Japan
The second-from-the-top model in Denon's early-nineties stereo receiver range, made in Japan and in very good condition, with 100 watts per channel, a phono stage, motorized volume and its original remote.
✔️ Very good condition — free of significant marks
✔️ 100 WPC, MM phono and motorized volume — made in Japan
✔️ Original Denon remote included
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Kenwood KR-A4070 Stereo Receiver – 60 WPC, Phono, Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Vintage Stereo Receiver – 20 WPC, Phono
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
Luxman R-117 Vintage Stereo Receiver – 160 WPC, MM & MC Phono
Aurex SA-5000 Vintage Stereo Receiver – 50 WPC, Toshiba, Japan
Marantz 2245 Vintage Stereo Receiver – 45 WPC, Level 1 Serviced
A Marantz 2245 from the golden age of the receiver, serviced on our bench and wearing its original Marantz case.
✔️ Condition: Very Good — original vented woodgrain case, sound
✔️ Level 1 service on our own bench, with post-service testing
✔️ 45 WPC · MM phono stage · tape loop · pre-out / main-in · two speaker pairs
✔️ Made in Japan — confirmed on the rear rating plate
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Ottawa Valley cherry cabinet available to order
Onkyo TX-906 Stereo Receiver – 80 WPC, Dolby Pro Logic
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
✔️ Good condition — works as it should; the black cabinet and faceplate present well
✔️ Through our Level 1 service — cleaned, deoxidized, checked and thoroughly tested on our bench
✔️ Phono input for your turntable, plus CD and two tape inputs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping












