Highly Sought After Vintage Polk 4 Driver Floor-Standers Monitor 10B

$495.00

Out of stock

Get first dibs on the next one

How First Dibs works →

Description

Highly Sought After Vintage Polk 4 Driver Floor-Standers

Polk’s clever design uses 2 smaller woofers instead of a single large one to maximize the quality of the all-important mid-frequencies and coupled these woofers with a 10” passive radiator to deliver solid deep bass. The result is a smooth, realistic wide-range response.

Nearly identical to Polk Audio Monitor 7 but sized like a Monitor 10, the Monitor 10B’s are heavy, solidly built speakers in an attractive Walnut Finish. These acoustic suspension speakers were made in the USA in the early 80’s, and they still have an avid following to this day.

Specifications:

Type: 4 driver loudspeaker system

Frequency Response: 25Hz to 26kHz

Recommended Amplifier: 20 to 250W

Impedance: 6Ω

Sensitivity: 89dB

Bass Radiator: 1 x 10″ fluid coupled

Midbass: 2 x 6.5″ cone

Tweeter: 1 x 1″ dome

Dimensions: H: 28 inches x W: 16 inches x D: 11.5 inches, H: 71.1 cm x W: 40.6 cm x D: 29.2 cm

Weight: 48 lbs each (21.8 kg each)

Asking just $495 for these wonderful vintage Polk floor-standers in very good condition and working perfectly.

Additional information
Weight102 lbs
Dimensions29 × 20 × 32 in
About brand
Polk Audio at Radique
New Polk Audio, too, quoted direct from the Canadian distributor:
We service Polk, too. Bring us your own Polk speakers and subwoofers for repair, servicing or restoration (speakers up to 80 lbs each), with a 90-day warranty on the work. See our Audio Service page

Polk Audio began in Baltimore in 1972, founded by Matthew Polk, George Klopfer and Sandy Gross. Its SDA speakers of the 1980s used a cable between the left and right speakers to widen the stereo image. We carry Polk towers, bookshelf speakers, centre channels and subwoofers. We've had more than 180 Polk listings so far, covering more than 80 different models. Every used Polk here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Looking for new Polk? We also quote new Polk Audio direct from the Canadian distributor, with free shipping within Canada: request a quote below. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our five best-selling Polk models so far: the RTi10 towers, the PSW10 and PSW125 subwoofers, the RTi4 bookshelf speakers and the CSi3 centre.

The Polk story, 1972 to today

Matthew Polk, George Klopfer and Sandy Gross, graduates of Johns Hopkins, founded Polk Audio in Baltimore, Maryland, in 1972. The Monitor 7 of 1974 was their first model to succeed, and the Monitor 10 followed in 1976.

SDA. In 1984 Polk introduced SDA (Stereo Dimensional Array). A cable between the left and right speakers lets each one cancel the sound that crosses over to the wrong ear, for a wider stereo image.

Growth. Polk went public in 1986 and moved to new premises in Baltimore. It began moving manufacturing to Tijuana, Mexico, in 1988, and by 2012 Stereophile reported that Polk designed in the US and built in China.

New owners. Directed Electronics agreed to buy Polk in 2006. Polk later became part of Sound United, Masimo bought Sound United in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 2018 Legend series brought SDA back.

Which Polk is which?

Monitor (1970s to early 1990s): the Monitor 4, 5, 7, 10 and 12, with A, B and C revisions.

SDA (1984 to about 1991): the SDA-1 and SDA-2 families, CRS, SRS and the later "TL" models.

RTA (1979 to 1992): towers such as the RTA 11t, with two woofers and two passive radiators.

RT and RTi (2001 onward): Polk's lower-priced lines. Our best-selling RTi10 towers and RTi4 bookshelf speakers come from here.

CSi centres and PSW subwoofers: the CSi3 centre and the PSW10 and PSW125 subwoofers are among the Polks we sell most.

LSi (about 2001 to 2010) and LSiM (2011): Polk's flagship lines of that decade, followed by Signature (2016), Legend (2018) and Reserve (2021).

Buying used Polk: what to check

SDA cable. SDA speakers need the interconnect cable between them for the SDA effect, and early SDA models need a common-ground amplifier. Make sure the cable comes with the pair.

Tweeters. Owners report that some SL3000 tweeters on the 1989 to 1991 SDA TL models leaked their ferrofluid and failed, and that Monitor-series pairs may carry mismatched factory or replacement tweeters. Check that every tweeter plays.

Surrounds. Some early Polks used foam surrounds, which rot with age; later models such as the RTA 11t and LSiM use rubber. Press gently on each woofer surround.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.