Showing 1–12 of 15 resultsSorted by price: high to low
Radique House Quad Speaker Cables, 10 ft Pair — Banana Ends
A matched ten-foot pair of our House Quad speaker cable, hand-assembled in Ottawa, terminated with Radique Audio Banana Plugs at both ends.
✔️ New — hand-assembled in our Ottawa shop
✔️ Covered by Radique Warranty
✔️ Bi-wire capable to order
✔️ Expertly packed for safe shipping
Pair of 4′ 13 AWG Kimber Kables with Banana Plugs
Eight strands of 19.5 AWG oxygen-free copper braided in Kimber's black and brown jacket — four strands per leg, which aggregates to 13 AWG a side. Polyethylene dielectric, and the braid keeps series inductance to 0.23 µH per metre. Four feet a side, terminated at both ends with Radique Audio banana plugs.
Quality Pair of Canare 4S8 3.5′ Speaker Cables, Bi-Wired
Canare's 4S8 star-quad cable — four 16 AWG conductors set the same distance from centre so their magnetic fields cancel, which keeps EMI off adjacent low-level lines. Combined, that works out to 13 AWG a leg. Three and a half feet a side, bi-wired: one pair of Radique Audio gold-plated bananas at the amplifier end, two pairs at the speaker end.
Radique House CCA Cables, 10 ft Pair — Pin to Small Spade
A matched ten-foot pair of our House CCA speaker cable, hand-assembled in Ottawa, with Radique Audio pin connectors at one end and small spade (fork) connectors at the other.
✔️ New — hand-assembled in our Ottawa shop
✔️ Radique Audio pin connectors to small spades (forks) for #10 / M5 posts
✔️ Two Radique hook-and-loop cable straps included
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
Radique House CCA Cables, 10 ft Pair — Banana to Small Spade
A matched ten-foot pair of our House CCA speaker cable, hand-assembled in Ottawa, with Radique Audio banana plugs at one end and small spade (fork) connectors at the other.
✔️ New — hand-assembled in our Ottawa shop
✔️ Radique Audio banana plugs to small spades (forks) for #10 / M5 posts
✔️ Two Radique hook-and-loop cable straps included
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
Intensifier Audio 14AWG Speaker Cables 8.5ft Pair, Banana Plugs
Eight feet six inches a side of heavy 14 AWG twin-conductor — denser in the hand than most 14 gauge, with thick insulation that resists kinking and lies flat along a baseboard. Fourteen gauge is the recommended minimum out to about fifty feet on an 8-ohm load, so at this length there is conductor to spare. Terminated here with our own banana plugs at all four ends and heat-shrunk at every joint.
Pair of 6′ Canare 4S8 13 AWG Speaker Cables (B/S)
Canare's 4S8 in a four-conductor star-quad geometry — every conductor the same distance from the centre, so the opposing magnetic fields cancel and the cable radiates far less interference into whatever runs beside it. 13 AWG, low capacitance and resistance, and flexible even below freezing. Terminated here with our own banana plugs at one end and spade connectors at the other.
Quality Pair of Canare 4S8 3.5′ Speaker Cables, Banana – Spade
Canare's 4S8 star quad, four 16 AWG conductors wired as a 13 AWG pair — the geometry puts every conductor the same distance from centre, so the opposing magnetic fields cancel. Terminated here by hand: Radique Audio gold-plated bananas at one end, gold-plated spades at the other. Three and a half feet, sold as a pair.
4′ 14 AWG Monster XP Cables w/ Spades & Banana Plugs
A pair of four-foot runs of 14 AWG Monster XP speaker wire, terminated at both ends: Radique Audio banana plugs at one end, Radique Audio spade connectors at the other. Four feet is a short run — amplifier and speakers sitting close together, with nothing to strip and nothing left over. Eighty-five dollars for the set.
Kimber Kable 4TC Speaker Cable — Bulk by the Foot or Meter
• Genuine Kimber Kable 4TC bulk speaker cable
• Choose Foot or Meter as your purchase unit
• Ships unterminated and un-stripped for DIY customers
• Approx. 2 x 13 AWG braided OFE copper design with low-loss fluorocarbon dielectric
• Want it stripped and prepped with reinforced split, or fully terminated in standard or bi-wire form? Order that version through our Custom Speaker Cable Builder
• Final sale on all custom-length bulk-wire orders — please measure twice before ordering
Attractive Pair of 42″ Acoustic Research Flat Speaker Cables
Acoustic Research's flat pure-copper cable in 16 gauge, cut to 42 inches and terminated here with our own banana plugs, with colour-coordinated shrink tubing over every joint and endpoint. The lay-flat profile is the reason to buy them — they run under a rug or along a baseboard where round cable will not. Sold as a pair.
Radique House CCA Speaker Cables, 10 ft Pair — Bare Wire Ends
A matched ten-foot pair of our House CCA speaker cable, hand-assembled in Ottawa, finished as bare wire at both ends.
✔️ New — hand-assembled in our Ottawa shop
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping