Quality Pair of Canare 4S8 3.5′ Speaker Cables, Bi-Wired
$125.00
Canare’s 4S8 star-quad cable — four 16 AWG conductors set the same distance from centre so their magnetic fields cancel, which keeps EMI off adjacent low-level lines. Combined, that works out to 13 AWG a leg. Three and a half feet a side, bi-wired: one pair of Radique Audio gold-plated bananas at the amplifier end, two pairs at the speaker end.
1 in stock
Pair of Canare 4S8 3.5′ Speaker Cables Bi-Wired with Radique Audio Banana Plugs at both ends (one pair at Amplifier End, Dual Pairs at Speaker End.) Perfect for Bi-Wiring your High Quality bookshelf speakers in a small deployment.
From Canare:
“Speaker cable must accommodate relatively high signal levels, typically tens to hundreds of watts of RMS power. Electromagnetic interference (EMI) can radiate from these speaker lines directly into adjacent low voltage cables (i.e. microphone, video lines, etc.). Canare solves this problem by using a 4-conductor “Star Quad” configuration in all of our 4S Series speaker cables. Because every conductor is located the same distance from the center, the opposing magnetic fields are cancelled out. Attenuation of magnetic field radiation is superior when compared to a standard 2-conductor speaker wire.
Our most popular 4 x 16 AWG flexible speaker cable. Perfect choice for all broad spectrum speaker systems and general purpose power amp setups. Good on Bi-Amped and Bi-Wired applications.
Features: Super Flexibility, even in Sub-Zero Weather Star Quad Design Reduces EMI Noise Low Capacitance and Resistance”
This pair of 3.5′ Canare 4S8 Star Quad Speaker Cables are a handcrafted audiophile-quality speaker cable with banana to banana connectors. This premium speaker cable utilizes 13 AWG Star Quad cable, which virtually eliminates EMI while offering minimum resistance and a high-quality frequency response due to low capacitance. Designed for both Music and home theatre applications, this hand assembled cable utilizes audiophile quality, Radique Audio gold-plated banana connectors at each end.
Specifications:
Material of Construction: Gold plated Radique Audio banana connectors, Polyethylene dielectric insulation, Canare 4S8, 13 AWG star quad speaker cable
Nom. O.D. in. (mm): .327 (8.3) PVC Jacket Nom. Thick. in. (mm): .043 (1.1) Brittle Point F (C): -56 (-49) No. of Cond.: 4 Insul. Type* Thick mil: PE 19.7 Cond-AWG (Qty./mil) Cross Sec. Area mil.2 Twin Cond. AWG**: AC-#16 (50/7.09) 1969 #13 Pitch of Quad in. (mm): Shield Coverage: – Electrical Performance/Quad Wired: Cond. D.C.R. ohm/1000ft (ohm/100m): 4.5 (1.5) Nom. Cap. *** pF/ft (pF/m): 44 (145) *Dielectric Strength = 500V AC/1min. Insulation Resistance/3Mft = >1000M ohm. **Effective AWG of combined twin conductors. ***Capacitance between twin Red and twin White conductors.
Length: 3.5′ / 1.07 m
Asking just $125 for this high quality pair of Canare 4S8 Cables, Bi-Wired with Radique Audio Banana Plugs.
| Weight | 7 lbs |
|---|---|
| Dimensions | 8 × 10 × 2 in |
Related Products
Intensifier Audio 14AWG Speaker Cables 8.5ft Pair, Banana Plugs
Eight feet six inches a side of heavy 14 AWG twin-conductor — denser in the hand than most 14 gauge, with thick insulation that resists kinking and lies flat along a baseboard. Fourteen gauge is the recommended minimum out to about fifty feet on an 8-ohm load, so at this length there is conductor to spare. Terminated here with our own banana plugs at all four ends and heat-shrunk at every joint.
Micca 14AWG Pure Copper Speaker Cables — 6ft Pair, Banana Plugs
Pair of 6′ Canare 4S8 13 AWG Speaker Cables (B/S)
Canare's 4S8 in a four-conductor star-quad geometry — every conductor the same distance from the centre, so the opposing magnetic fields cancel and the cable radiates far less interference into whatever runs beside it. 13 AWG, low capacitance and resistance, and flexible even below freezing. Terminated here with our own banana plugs at one end and spade connectors at the other.
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
Pair of 4′ Monster Cable Z Series Z1R Reference Speaker Cables
A four-foot pair from Monster's Z Series, terminated at both ends with Monster's own banana plugs. Twisted copper strands around a central core, PEX dielectric, and the multiple-gauge Time Correct network Monster used at the top of the range. Heavy for their length, and short enough to suit a bookshelf pair or a compact home theatre run.
Attractive Pair of 42″ Acoustic Research Flat Speaker Cables
Acoustic Research's flat pure-copper cable in 16 gauge, cut to 42 inches and terminated here with our own banana plugs, with colour-coordinated shrink tubing over every joint and endpoint. The lay-flat profile is the reason to buy them — they run under a rug or along a baseboard where round cable will not. Sold as a pair.
Pair of 4′ 13 AWG Kimber Kables with Banana Plugs
Eight strands of 19.5 AWG oxygen-free copper braided in Kimber's black and brown jacket — four strands per leg, which aggregates to 13 AWG a side. Polyethylene dielectric, and the braid keeps series inductance to 0.23 µH per metre. Four feet a side, terminated at both ends with Radique Audio banana plugs.
