Pair of 4′ 13 AWG Kimber Kables with Banana Plugs
$125.00
Eight strands of 19.5 AWG oxygen-free copper braided in Kimber’s black and brown jacket — four strands per leg, which aggregates to 13 AWG a side. Polyethylene dielectric, and the braid keeps series inductance to 0.23 µH per metre. Four feet a side, terminated at both ends with Radique Audio banana plugs.
1 in stock
Pair of 4′ Distinctive Black/Brown 13 AWG Kimber Kables terminated with Radique Audio Banana plugs
If you’re looking to amplify some good quality speakers, this is an elegant, attractive and high-fidelity way to do so, for a great price.
HIGH CURRENT BRAIDED LOUDSPEAKER CABLE
8 strands of 19.5 AWG OFC (oxygen free copper) copper. Aggregate combination of 4, 19.5AWG strands=13AWG per +/- leg.
Polyethylene dielectric. Black/Brown
LOW series induction design: 0.23 uH / meter
Curious how Radique became a Kimber dealer?
There’s actually a pretty great story behind it — and yes, somehow it involves polar bears. This video also gives you a closer look at Kimber’s cable philosophy and shows both the 4PR and 12TC in the real world.
Watch the Kimber story on YouTube | Visit our Kimber at Radique page
| Weight | 5 lbs |
|---|---|
| Dimensions | 8 × 10 × 2 in |
Related Products
Micca 14AWG Pure Copper Speaker Cables — 6ft Pair, Banana Plugs
Intensifier Audio 14AWG Speaker Cables 8.5ft Pair, Banana Plugs
Eight feet six inches a side of heavy 14 AWG twin-conductor — denser in the hand than most 14 gauge, with thick insulation that resists kinking and lies flat along a baseboard. Fourteen gauge is the recommended minimum out to about fifty feet on an 8-ohm load, so at this length there is conductor to spare. Terminated here with our own banana plugs at all four ends and heat-shrunk at every joint.
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
4′ 14 AWG Monster XP Cables w/ Spades & Banana Plugs
A pair of four-foot runs of 14 AWG Monster XP speaker wire, terminated at both ends: Radique Audio banana plugs at one end, Radique Audio spade connectors at the other. Four feet is a short run — amplifier and speakers sitting close together, with nothing to strip and nothing left over. Eighty-five dollars for the set.
Pair of 4′ Monster Cable Z Series Z1R Reference Speaker Cables
A four-foot pair from Monster's Z Series, terminated at both ends with Monster's own banana plugs. Twisted copper strands around a central core, PEX dielectric, and the multiple-gauge Time Correct network Monster used at the top of the range. Heavy for their length, and short enough to suit a bookshelf pair or a compact home theatre run.
Attractive Pair of 42″ Acoustic Research Flat Speaker Cables
Acoustic Research's flat pure-copper cable in 16 gauge, cut to 42 inches and terminated here with our own banana plugs, with colour-coordinated shrink tubing over every joint and endpoint. The lay-flat profile is the reason to buy them — they run under a rug or along a baseboard where round cable will not. Sold as a pair.
Pair of 6′ Canare 4S8 13 AWG Speaker Cables (B/S)
Canare's 4S8 in a four-conductor star-quad geometry — every conductor the same distance from the centre, so the opposing magnetic fields cancel and the cable radiates far less interference into whatever runs beside it. 13 AWG, low capacitance and resistance, and flexible even below freezing. Terminated here with our own banana plugs at one end and spade connectors at the other.
