Attractive, Classic PSB Towers in Honey Oak Stratus
$995.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Other towers we have in stock now
3 in stock · $445.00–$1,295.00 · all ship
PSB Imagine T Towers – Gorgeous Dark Cherry Real Wood Veneer$1,295.00Ships
PSB Image 4T 2.5-Way Tower Speakers — Made in Canada, Bi-Wire$445.00Ships
Attractive, Great Sounding B&W 3-Driver Floor-Standers DM603$895.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →Attractive, Classic PSB Stratus Towers in real Honey Oak. Top caps and pedestal bases have been beautifully refinished.
The PSB Stratus Tower Speakers are a remarkable two-way, reflex-loaded, dynamic floor-standing loudspeaker system that delivers outstanding audio performance. These Canadian-made speakers are known for their relaxed and easy sound, combined with remarkable dynamic range and detail.
Description:
Two-way, reflex-loaded, dynamic floor-standing loudspeaker system.
Drivers: one 8″ long-throw woofer with 3-lb magnet; one 1″ treated-textile dome, ferrofluid-cooled.
Crossover frequency: 1800Hz. System Q: 0.7 at 35Hz.
Frequency range: 26Hz-21kHz.
Frequency response: –1.5dB, 40Hz–20kHz.
Sensitivity: 86dB/W/m; 88dB in typical listening room.
Maximum program input: 150W.
Maximum amplifier power: 200W, clipping less than 10% of time.
Impedance: 6.5 ohms rated, 6 ohms minimum.
Dimensions: 38¼” H by 11″ W by 13½” D. Weight: 57 lbs.
Experience the PSB Stratus Tower Speakers’ exceptional sound quality, impressive dynamic range, and superior imaging capabilities. These Canadian-made floor-standing loudspeakers are the perfect addition to any discerning audiophile’s setup. The beautifully refinished pedestal bases and top caps help these vintage beauties to look as good as they sound. No grills included with this pair, but they look better without them in any case.
Originally listed at ~ $2200 CND with HST. Asking $995 for these beautifully re-finished PSB Stratus Floor-Standers in real Honey Oak veneer.
| Weight | 120 lbs |
|---|---|
| Dimensions | 17.5 × 28 × 42.25 in |
Related Products
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
The flagship of Energy’s Connoisseur range, built in Toronto by a company whose voicing grew out of the National Research Council’s listening work in Ottawa. Two 8-inch aluminium-polypropylene woofers and a cloth-suspended aluminium dome, crossed at 1,800 Hz and reaching 28 Hz — genuinely full-range, so most rooms will not want a subwoofer under them. At 93 dB it runs happily on 30 watts. High-gloss black, made in Canada, 57 lb each. Very Good condition. Pair — pickup in Kanata, or we deliver.
B&W CM4 Towers – Rosenut, Made in England, Nautilus Tweeter
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
