B&W DM610 Bookshelf Speakers – Made in England – 8″ Woofer

$395.00

A sealed two-way from B&W’s 600 Series, made in England between 1991 and 1992 — an 8-inch reinforced polypropylene woofer crossed at 2.5 kHz to a 26mm magnetic-fluid-cooled metal dome. 89 dB, 4 ohms, 30 to 150 watts, in a cabinet drawn by Dr Kenneth Grange. Good cosmetic condition, fully tested.

1 in stock

Description

B&W DM610 Bookshelf Speakers | Made in England | 8″ Woofer Pair

A pair of handcrafted, Made-in-England bookshelf monitors from Bowers & Wilkins’ respected 600 Series, combining a full-size 8-inch woofer with a magnetic-fluid cooled metal dome tweeter in an elegant sealed enclosure built for honest, accurate sound.

The DM610 was produced from 1991 to 1992 as part of B&W’s 600 Series — a line designed with the more demanding digital sources of the 1990s specifically in mind. The sealed “closed box” design was chosen for its superior transient accuracy, ensuring that the attack and decay of musical notes are reproduced with precision and without the overhang that can colour bass from ported designs. The result is a speaker that sounds controlled, articulate and genuinely musical across all genres.

The cabinet was designed by Dr. Kenneth Grange, one of the UK’s most celebrated industrial designers, giving the DM610 clean, dark lines that sit comfortably in contemporary living spaces. The front baffle is a high-rigidity polymer moulding, selected specifically for its ability to suppress cabinet resonances and keep the listening experience focused on the music. The 200mm (8-inch) bass/midrange driver features a reinforced polypropylene diaphragm, low-hysteresis rubber surround, and a high-temperature voice coil on a Kapton former — engineering choices that contribute to outstanding bass performance and articulate attack even at higher volumes. The 26mm metal dome tweeter with magnetic-fluid cooling handles high power levels cleanly and maintains true pistonic motion well beyond the 20kHz ceiling of audibility, ensuring an airy, detailed top end.

As with every component we sell at Radique Audio, this pair has been thoroughly tested before listing.

Specifications:

Type: 2-way, 2-driver closed-box (sealed) digital monitor system

Woofer: 200 mm (8 inch) reinforced polypropylene cone, high-temperature voice coil on Kapton former

Tweeter: 26 mm metal dome, magnetic-fluid cooled, high-temperature voice coil

Frequency response: 70–20,000 Hz (±2 dB)

Sensitivity: 89 dB (2.83V/1m)

Impedance: 4 ohms

Recommended amplifier power: 30–150 W

Crossover frequency: 2,500 Hz (second order)

Enclosure: Sealed closed box

Finish: Black Zelda vinyl

Country of manufacture: England

Dimensions: (W x H x D) 9.3 x 19.3 x 11.9 inches / 236 x 490 x 303 mm

Weight: 17.2 lbs / 7.8 kg each

These handsome English monitors deliver the kind of articulate, naturally balanced sound that made B&W’s 600 Series a benchmark for the era — detailed highs, controlled bass, and a wide, stable stereo image that rewards careful listening. In good cosmetic condition and fully tested, this pair is ready to perform in your listening room for years to come.

Backed by Radique Audio’s Bumper-to-Bumper Warranty and Perpetual Trade-Back Program, these are a confident purchase for any music lover looking for a genuine slice of British hi-fi heritage.

$395.00
Additional information
Weight37 lbs
Dimensions16 × 24.6 × 23.3 in
Impedance4 Ω
Power Handling101–200 W
Sensitivity86–89 dB
Woofer Size8″
About brand
B&W at Radique
We service B&W, too. Bring us your own B&W speakers and subwoofers for repair, servicing or restoration (speakers up to 80 lbs each), with a 90-day warranty on the work. See our Audio Service page

Bowers & Wilkins began in Worthing, England, in 1966, founded by John Bowers. The name comes from the Worthing electrical shop he ran with Roy Wilkins. Its 800 Series monitors have been used at Abbey Road Studios since 1980, Abbey Road says. We carry B&W towers, bookshelf speakers, centre channels and stands. We've had more than 200 B&W listings so far. Every used B&W here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

The Bowers & Wilkins story, 1966 to today

John Bowers founded B&W in Worthing, England, in 1966, after hand-assembling speakers at the electrical shop he ran with Roy Wilkins. Its first speaker, the P1, used B&W's own cabinet and crossover with bought-in drivers, and the DM1 and DM3 "Domestic Monitors" followed in 1968.

Kevlar and the 801. B&W identified Kevlar as a cone material in 1974, and the DM6 of the mid-1970s used Kevlar cones. The original 801 monitor of 1979 to 1980 made its name in recording studios: Abbey Road says it was the first studio to use it, in 1980, and has used the 800 Series ever since.

Matrix and Nautilus. The Matrix cabinet bracing arrived in the mid-to-late 1980s. John Bowers started the project that became the Nautilus, the spiral-shell flagship, before he died in 1987, and it launched in 1993. The first 600 Series followed in 1995, and diamond-dome tweeters arrived in 2005.

New owners. EVA Automation bought B&W in 2016, Sound United in 2020 and Masimo in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 800 Series Diamond D5, unveiled in June 2026, is built in Worthing.

A Canadian connection. Classé Audio of Montreal was part of the B&W Group from 2001 until B&W closed its Montreal headquarters in 2017.

Which B&W is which?

DM (Domestic Monitor), 1968 onward: from the DM1 and DM3 to models such as the DM6 and DM7. The DM prefix carried into early 600 Series names.

600 Series (1995 to today): B&W's entry hi-fi line; the 2020 Anniversary Edition was its seventh generation. The 606 belongs here.

CDM (mid-1990s to about 2003): such as the CDM 1, with a metal-dome tweeter and a Kevlar cone.

700 Series (about 2003 to 2006): Nautilus technology at mainstream prices, such as the 703 and 705.

CM Series (2006 to 2017): such as the CM1 and the CM4 towers, replaced by the 700 Series S2 in 2017.

800 Series (from 1979 to 1980): from the original 801 through the Matrix, Nautilus 800, Diamond, D3, D4 and D5 generations.

Nautilus (1993): the spiral-shell flagship, still made in small numbers.

Buying used B&W: what to check

Tweeter domes. B&W used metal-dome tweeters in the CDM, 600 and CM lines, and owners report squashed domes. Inspect each dome closely.

Original tweeters. Some CDM-era tweeters are discontinued, and rebuilt or substitute tweeters change the sound. Ask whether the originals are fitted.

Woofer surrounds. Owners report rubber surrounds that have hardened with age. Press each surround gently: it should feel supple.

1970s DM models. Expect crossover capacitors in a 40-year-old DM to need replacing.

Where it was made. The 800 Series is built in Worthing; the 600 and 700 Series are made in China. Check the label before calling a B&W "made in England".

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.