Cambridge Audio 50 WPC Integrated Amplifier with Phono A3i
$395.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Give your next receiver Bluetooth. RA-Twin II, $39.00 →
Other stereo receivers we have in stock now
3 in stock · $345.00–$395.00 · all ship
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent$395.00Ships
Nakamichi RE-2 Stereo Receiver – Powerful 55 WPC$345.00Ships
NAD 7225PE AM/FM Stereo Receiver — 25 WPC, Power Envelope$345.00Ships
Give your next receiver Bluetooth.
The RA-Twin II adds Bluetooth streaming to any vintage receiver or amp with a spare input. Phone to stereo in about a minute, and nothing on the receiver is modified.
RA-Twin II, $39.00 →High Quality Cambridge Audio 50 WPC Integrated Amplifier with Phono
Introducing the Cambridge Audio A3i Integrated Amplifier, a well-regarded component in the world of hi-fi audio, known for its robust performance and classic British sound, equipped with the optional Phono pre-amplifier module. Also features a tape loop, suitable for adding an EQ. Clean, simple controls with excellent sound make this Cambridge Audio A3i a highly desireable mid-power Integrated Amplifier.
Boasts elegant, uncluttered front controls: rotary bass, treble, balance, and volume controls, input and output selection switches, power and mute buttons, tone defeat switch.
Design and Build Quality:
The A3i features a sleek, minimalist design typical of Cambridge Audio’s approach, with straightforward controls and a solid build that promises durability.
Sound Quality:
Praised for its warm and engaging sound signature, the A3i delivers a balanced audio performance suitable for a wide range of musical genres.
Perfect for Audiophiles:
The Cambridge Audio A3i is ideal for those seeking an integrated amplifier that combines power, flexibility, and high-fidelity sound. Its ability to handle multiple inputs makes it a versatile choice for any audio setup.
Technical Specifications:
– Power Output: 50 watts per channel into 8 ohms (stereo)
– Frequency Response: 2Hz to 50kHz
– Total Harmonic Distortion: 0.05%
– Input sensitivity: 1.75mV (MM), 200mV (line)
– Signal to noise ratio: 90dB (line)
– Channel separation: 75dB (line)
– Speaker load impedance: 4Ω to 16Ω
Dimensions: W: 430mm x H 90:mm x D: 300mm (17″ x 3.5″ x 11.8″), Weight: 5.6 Kg (12.35lbs)
Experience classic British sound with the Cambridge Audio A3i Integrated Amplifier, a reliable choice for enhancing your listening experience.
Asking $395 for this high quality Cambridge Audio Integrated amplifier with optional Phono Preamp module.
| Weight | 16 lbs |
|---|---|
| Dimensions | 15.8 × 21 × 7.5 in |
Related Products
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
Luxman R-117 Flagship Stereo Receiver — 160 WPC, MM & MC Phono
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
