LXI AM4002 Integrated Amplifier 80 WPC (est), Dual Phono
$345.00
Sold through Sears in the late seventies and heavier than that suggests — 22.9 lb, a 450 VA power rating, and metal knobs on everything. Two separate phono inputs, tape monitor and dubbing, subsonic and high filters, A/B speakers, and a front-panel mic mixing input. No factory manual survives, so the 80 WPC is our own conservative estimate. Level 1 serviced here; good cosmetic condition.
1 in stock
LXI AM4002 Integrated Amplifier 80 WPC (est), Dual Phono
A Korean-made LXI Series AM4002 integrated stereo amplifier, finished in black with solid metal silver knobs and switches — a surprisingly serious, feature-rich integrated with dual phono inputs, substantial weight for its form factor, and a very robust power supply, in good overall cosmetic condition.
LXI-branded components were sold through Sears in the late 1970s and early 1980s, but the AM4002 feels every bit as substantial as the better-known Japanese integrated amplifiers of the era. The front panel layout centres around a large power level display, flanked by a full compliment of controls: separate bass and treble, subsonic and high filters, loudness, muting, stereo/mono switching, tape monitor and dubbing, and even a front-panel mic mixing input. The knobs are metal, cold to the touch and reassuringly solid in feel, very much in the spirit of contemporary Marantz and Pioneer designs. Speaker outputs for A and B pairs, a dedicated headphone jack, and a selector offering PHONO 1, PHONO 2, TUNER, and AUX make this a genuinely versatile hub for a vintage two-channel system.
The rear panel confirms dual phono inputs (PHONO 1 and PHONO 2), along with TUNER and AUX, two tape loops, A/B speaker outputs, and switched/unswitched AC convenience outlets. The amplifier is rated for 120 V 60 Hz operation with a 450 VA power consumption figure, which, combined with its 22.9 lb weight, strongly suggests a serious power transformer and real current delivery capability. In listening, the AM4002 behaves like a genuinely powerful amplifier, driving demanding speakers with ease and maintaining composure at higher levels.
Despite careful research, we have not been able to locate an original factory manual or authoritative published specifications for the AM4002. One anecdotal reference claims a rating of approximately 100 watts per channel, and based on the 450 VA power consumption rating, the amplifier’s substantial heft, and our own listening tests, that figure is entirely plausible — but in the absence of original documentation, it remains an informed estimate rather than a verified specification. For that reason we describe the amplifier more conservatively as approximately 80 WPC (est) in the title, while noting the 100 WPC anecdote here. What can be said with confidence is that this model appears to be extremely scarce on today’s market, a rarity that will appeal to collectors looking for something off the beaten path with real substance behind it.
Cosmetically, this unit is in good condition overall. The case and faceplate show honest wear consistent with age and use, but the black faceplate still presents well, the contrasting silver metal knobs and switches are intact and operate smoothly, and the casework remains solid and presentable on the rack.
This unit has undergone our Level One service and testing which should ensure many more years of reliable performance ahead.
Model: LXI Series AM4002 integrated stereo amplifier
Country of manufacture: Korea (manufactured exclusively for Simpsons-Sears Limited, Toronto)
Inputs: PHONO 1, PHONO 2, TUNER, AUX
Tape loops: 2 (record/playback, with dubbing capability)
Tone controls: Bass and treble
Filters: Subsonic and high filter switches
Loudness: On/off
Mode: Stereo/mono
Speaker outputs: A and B pairs (8 ohm minimum recommended)
Headphone output: Front-panel jack
Mic mixing: Front-panel mic input with level control
AC outlets: Switched and unswitched convenience outlets (rear panel)
Power consumption: 120 V 60 Hz, 450 VA
Approximate power: ~80 WPC (estimated from power consumption and listening); anecdotal reports suggest up to ~100 WPC (not factory-verified)
Dimensions: (Width x Height x Depth) 17.5 x 5.25 x 13.5 inches (445 x 133 x 343 mm)
Weight: 22.9 lbs (10.4 kg)
A rare Korean-built LXI integrated that punches well above its badge — heavily built for its size, genuinely powerful in use, with solid metal controls and a feature set that rivals better-known Japanese amplifiers from the same era. Properly serviced and tested, ready to serve as the muscular heart of a vintage two-channel system.
Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.
| Weight | 25 lbs |
|---|---|
| Dimensions | 17.5 × 21.5 × 9.25 in |
Related Products
Technics SU-V76 New Class A Integrated Amp 100 WPC — Japan
A 1987 New Class A integrated: pure Class A at low levels, sliding to Class A/B when the music asks for it, 100 watts a channel into 8 ohms at 0.05% distortion. It draws about 30 watts at idle, which is how you know the Class A bias is real rather than a label. MM phono and A/B speaker switching. Level 1 serviced; good cosmetic condition.
Monster Technics SU-G90 130 WPC Integrated Amp – Made in Japan
130 watts a channel into 8 ohms with both channels driven at 0.05% distortion, six analog inputs and an MM phono stage. This 1991 design also carries a Dolby Pro Logic decoder with its own 15-watt rear amplifier section, so it can run a compact surround setup on its own. Made in Japan; good cosmetic condition.
Sansui A-900P 70 WPC Integrated Amplifier – Made in Japan
Seventy watts a channel into 8 ohms at 0.05% distortion, from a DC servo output stage, with frequency response running from 5 Hz to 60 kHz. Moving-magnet phono at 2.5mV, line inputs for tuner, CD and aux, and a tape monitor loop for an outboard EQ. Built in Japan between 1985 and 1986. Condition very good; inspected and tested.
Luxman LV-90 Stereo Integrated Amplifier 35W – Phono, Japan
Denon PMA-600NE Integrated Amp, Current Model, 45 WPC, Phono, BT
Braun Atelier A1 Slim Integrated Amp — 55 WPC, Pre-Out, Japan
The component that makes the rest of an Atelier system work, and the one people hunting these usually look for first. 55 watts per channel into 8 ohms and 80 into 4, with a preamplifier section that separates from the power stage — engineering that is not an afterthought to the industrial design. 445 mm wide and 70 mm tall, the exact footprint of the T1 tuner and C1 deck, so the stack reads as one machined object. Made in Japan for Braun. Good condition.











