

Denon AVR-1913 630 Watt 7.1 AVR x 6 x HDMI, Dual Zone
$295.00
Out of stock
Email when stock available
Denon AVR-1913 630 Watt 7.1-Channel Network AVR x 6 x HDMI, Dual Zone – Tested, with Calibration Mic and Remote
Experience powerful, feature-rich surround sound with the Denon AVR-1913—a well-engineered 7.1-channel receiver designed for intuitive setup and exceptional audio/video performance. Fully tested and working perfectly, this unit includes the original Audyssey calibration microphone and remote control for immediate setup and operation.
The AVR-1913 delivers a robust 90 watts per channel (8Ω, 20Hz–20kHz, 0.08% THD), with all seven channels equipped with fully discrete Class AB amplifier circuits for equal power and high-quality, identical sound across all speakers. The independent power supplies for each channel combined with minimum signal path design contribute to clean, musicially transparent reproduction. The high-current, low-impedance amp design handles demanding speakers with authority, producing dynamic, detailed surround sound for movies and music alike.
Audyssey MultEQ automatic room calibration uses the included measurement microphone to analyze your listening environment across up to six measurement points, automatically optimizing speaker distance, level, crossover frequency, and tonal balance. Audyssey Dynamic Volume adjusts volume levels in real-time, while Audyssey DynamicEQ improves surround effects during low-volume listening. Two Direct Listening Modes bypass tone controls and DSP processing for the purest sound reproduction.
Featuring 6 HDMI inputs (1 front-panel) with HDMI 1.4a, the AVR-1913 provides 1080p analog-to-HDMI video upscaling, 3D pass-through, Deep Color and x.v.Color support, and Audio Return Channel (ARC) for modern home theater systems. Network connectivity (Ethernet; Wi-Fi compatible with third-party adapters) unlocks AirPlay, DLNA, Internet Radio, Pandora, SiriusXM, Spotify, and FLAC HD/high-resolution audio support. The Denon Remote App works on iOS and Android devices for flexible control.
Flexible amplifier assignment allows configuration as 7.1 surround, 5.1 surround with front bi-amp, Dolby Pro Logic IIz height channels, or multi-room Zone 2 stereo output. Supports full range of Dolby Digital, TrueHD, DTS-HD Master Audio, DTS-ES, Pro Logic IIz, Virtual Matrix, and DSP modes.
Key Features:
90W x 7 channels (8Ω, discrete Class AB, 0.08% THD), up to 125W into 6Ω
Fully discrete amplifier circuits for all seven channels—equal power, identical quality
Independent power supplies for clean signal purity and audio clarity
Minimum signal path design reduces signal degradation
Direct and Pure Direct listening modes bypass tone controls and analog video circuitry
Audyssey MultEQ automatic room calibration with included measurement mic
Audyssey Dynamic Volume and DynamicEQ for optimized playback
6 HDMI in (1 front) / 1 HDMI out with 1.4a, ARC, 3D, Deep Color, x.v.Color
1080p video upscaling for analog sources
Network streaming: AirPlay, DLNA, Internet Radio, Pandora, SiriusXM, Spotify, FLAC HD
Front-panel HDMI, USB (iPad/iPhone/iPod support), 3.5mm aux input
2 optical, 1 coaxial digital audio inputs
Flexible Power Amp Assignment: 7.1 surround, 5.1 bi-amp, Pro Logic IIz heights, or Zone 2
Powered Zone 2 output with assignable channels
Multi-room audio capability
FM/AM tuner with 30 presets
Headphone output (1/4″ jack) with auto speaker mute
Denon Remote App (iOS/Android compatible)
Supplied remote and Audyssey calibration microphone
Specifications:
Power Output: 90W/ch x 7 (8Ω, 20–20kHz, 0.08% THD); 125W/ch (6Ω, 1kHz, 0.7% THD)
Frequency Response: 10Hz–100kHz (+1/–3dB)
Signal-to-Noise Ratio: 100dB (IHF-A, Direct mode)
Speaker Impedance: 6–16Ω
Dimensions: 434 × 162 × 329 mm (17.1″ × 6.4″ × 13″)
Weight: 9.4 kg (20.7 lbs)
Includes Denon Remote and Calibration Mic
Praised for its “intuitive setup,” “great-sounding” performance, and “solid feature set,” the AVR-1913 excels at bringing Blu-ray, streaming, and multichannel audio to life, asking $295; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 24 lbs |
|---|---|
| Dimensions | 17 × 21.1 × 10.4 in |
Related Products
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
Onkyo TX-NR737 770W 7.2 Atmos 4K Wi-Fi Bluetooth THX AVR
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.











