NAD T 757 7.1 AV Receiver – 7 x 60W, 7 Digital Inputs, Remote
$395.00
A 7.1-channel NAD surround receiver in very good condition, rated at 60 watts per channel with all seven channels driven, with seven digital audio inputs, NAD's modular design and a remote.
✔️ Very good condition — free of significant marks; remote included
✔️ 7 x 60 W, all channels driven — Dolby TrueHD and DTS-HD Master Audio
✔️ Seven digital audio inputs and four HDMI inputs (1080p and 3D)
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
1 in stock
A 7.1-channel NAD surround receiver in very good condition, rated at 60 watts per channel with all seven channels driven, with seven digital audio inputs, NAD’s modular design and a remote.
What it is
NAD rates its receivers conservatively, and the T 757 is a good example: 60 watts per channel with all seven channels driven at once, across the full 20 Hz to 20 kHz band, rather than one channel at a time. That makes its numbers a fair comparison against rivals that quote a single channel.
The audio side is where this receiver shines. It decodes Dolby TrueHD and DTS-HD Master Audio, and its seven coaxial and optical digital inputs take a CD player, a streamer, a game console and a TV at the same time. NAD’s EARS mode draws natural surround ambience out of stereo recordings, a second audio zone can feed another room, and Audyssey automatic setup measures your speakers and sets distances and levels for you. There is an AM/FM tuner as well.
On the video side, be aware of its age: the four HDMI inputs carry 1080p and 3D but not 4K. In a 4K system, connect your 4K sources straight to the TV and send the sound back to the T 757 through the HDMI Audio Return Channel or an optical cable, and it becomes a superb sound engine for a modern screen. Analog video sources are converted to HDMI.
The T 757 is built on NAD’s Modular Design Construction, with the digital audio and video sections on plug-in modules rather than fixed to the main chassis.
It sold new in 2011 for US$1,599, about $2,200 in 2026 Canadian dollars.
Condition
Very good, and free of significant marks, as the photographs show. A remote is included.
A serious seven-channel NAD with honest power ratings and a full set of digital audio inputs, at a fraction of its original price.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
NAD T 757 Specifications
- Type: 7.1-channel AV receiver
- Power output: 7 x 60 watts, all channels driven, 20 Hz – 20 kHz (NAD Full Disclosure Power)
- Surround decoding: Dolby TrueHD, DTS-HD Master Audio
- Digital audio inputs: 7 (coaxial and optical)
- HDMI: 4 inputs, 1 output; up to 1080p and 3D (not 4K); Audio Return Channel
- Video: analog video converted to HDMI
- Setup: Audyssey automatic speaker setup
- Design: NAD Modular Design Construction (plug-in modules)
- Extras: EARS stereo-to-surround mode, Zone 2 audio, AM/FM tuner
- Remote: included
- Dimensions: (Width x Height x Depth) 17.1 x 6.8 x 15.7 inches (435 x 173 x 399 mm)
- Weight: 33.9 lbs (15.4 kg)
🔌 Speaker Cable, Built on Our Own Bench
We hand-build speaker cable here in any length you need — pick the gauge and the terminations on our Custom Speaker Cable Builder. We also make our own gold-plated banana plugs, spades and pin connectors if you would rather terminate cable you already have. 👉
📶 Add Bluetooth — The RA-Twin II, Built For Exactly This
The T 757 has no Bluetooth built in, and it does not need replacing to get it. Our own RA-Twin II adapter plugs into a spare analog audio input on the back and streams from a phone, tablet or laptop — nothing modified inside, and it comes with a starter cable so it works out of the box. If you want it done properly, the Gold Series RX Bundle pairs the adapter with our shielded Gold Series 3.5 mm to Dual RCA cable for less than buying the two separately. 👉
⚠️ Important Information for International Buyers
This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 35.9 lbs |
|---|---|
| Dimensions | 19.7 × 21.1 × 10.8 in |
You may also like…
PSB Image 8C Centre Channel Speaker — 240W Peak | Made in Canada
Two 5.25-inch woofers either side of a 1-inch aluminium dome, crossed at 2.2 kHz in a wide front-ported cabinet — 55 Hz to 21 kHz, 90 dB, and 240 watts of peak handling on a 6 ohm load. Voiced by Paul Barton against NRC anechoic measurements and built in Canada. Very good condition, apart from a few small mounting holes underneath that a shelf hides.
Beautifully engineered NHT Center speaker VS-1.2a
Two 4.5-inch woofers and a 1-inch fluid-cooled soft dome on a single integrated baffle — NHT's Coherent Array, which keeps the response even as you move off centre. Crossed at 2.2 kHz at 12 dB an octave, 86 dB into a nominal 8 ohms, 80 Hz to 21 kHz. Video-shielded, high-gloss black, 13.5 lbs, with an adjustable foot for aiming. Stood on end it works as a satellite instead.
RA-Twin II Gold Series RX Bundle
The RA-Twin II plus our shielded Gold Series 3.5 mm to dual RCA cable: stream from your phone to any vintage receiver, amplifier or powered speakers, for less than buying the two separately.
- RA-Twin II Bluetooth 5.4 adapter (RX, TX and Mobile modes)
- Gold Series 3.5 mm to dual RCA cable, shielded and gold-plated
- No noise after streaming stops
- Clear online manual in English & French
- 1-year warranty, Ottawa-based support
Black Series Optical (Toslink) Cable
The second cable in Radique’s Black Series — an optical fibre core inside a flexible PVC layer and a soft braided mesh, with moulded strain relief boots at both ends and gold-plated connectors. It carries everything an optical connection supports: PCM stereo, plus Dolby Digital and DTS 5.1 surround (Dolby TrueHD and DTS-HD Master Audio need HDMI). Available in 1 m and 2 m. Budget optical cables tend to fail after a few connect-disconnect cycles; this one is built not to.
Custom Speaker Cable Builder
🎯 Your specs, your cable — choose cable type, length & connectors
💰 Live pricing — price updates instantly as you configure
↔️ Bi-wire capable — available on Kimber 4PR, Kimber 4TC and House Quad
🔥 Heat-shrink reinforced — colour-coordinated at every termination & joint
🍁 Hand-assembled in Ottawa — backed by our Bumper-to-Bumper Warranty
Related Products
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
Denon AVR-S720W 7.2 AVR 75 WPC – Dolby Atmos, 4K, Wi-Fi
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.


















