Energy Connoisseur C-2 Bookshelf Speakers – Made in Canada
$325.00
The standmount at the top of Energy's acclaimed 1990s Connoisseur line, in high gloss black, presenting very well and sounding great for their size.
✔️ Good condition, at the upper end of the grade — the high gloss black presents very well as a pair
✔️ Bi-wire ready — four gold binding posts on each speaker, jumpers in place
✔️ Made in Canada — the standmount at the top of Energy’s acclaimed Connoisseur line
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
The standmount at the top of Energy’s acclaimed 1990s Connoisseur line, in high gloss black, presenting very well and sounding great for their size.
What they are
The Connoisseur C-2 is classic Canadian loudspeaker engineering: a two-way, front-ported standmount from Energy of Scarborough, Ontario, built by a design team working from the listening research done at Canada’s National Research Council. When Stereophile’s Thomas J. Norton reviewed them in 1996, he found the pair, then US$700, made “a powerful argument” for value, with a spacious soundstage, clean and naturally warm midbass, and treble he described as “easy, open, detailed.”
A 6.5″ woofer with an injection-moulded aluminum/polypropylene cone works with a 1″ aluminum-dome tweeter through a 1.8 kHz crossover. The result reaches down to 40 Hz, which is real bass from a bookshelf cabinet, and at 88 dB and 8 ohms nominal they are an easy load for anything from a vintage receiver to a modern integrated in the 30 to 130 watt range. The port sits on the front baffle, so they are happy closer to a wall than a rear-ported design. Around the back, a recessed cup carries gold-plated bi-wire binding posts, so you can run a single cable through the jumpers or bi-wire them. They are a natural match for acoustic music, vocals and jazz, and have the punch for rock and electronic as well.
Condition
Good, at the upper end of that grade. The high gloss black is the reason it is not higher: a gloss finish shows the small marks of use that a matte or wood finish would hide. Taken as a pair, they still present very well, and they sound great for their size. Both speakers carry their jumpers; on one, a short wire link stands in for one of the two gold straps, and it does the same job.
Canadian reference sound from Energy’s best years, in a finish that still turns heads.
Available for pickup in Kanata, or shipped across Canada and internationally — we have sent equipment to fifteen countries in the past year, each piece packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.
Energy Connoisseur C-2 Specifications
- Design: two-way, standmount, bass reflex (front-ported)
- Woofer: 6.5″ injection-moulded aluminum/polypropylene cone
- Tweeter: 1″ aluminum dome
- Crossover: 1.8 kHz
- Frequency response: 40 Hz – 25 kHz (±3 dB)
- Sensitivity: 88 dB/W/m
- Impedance: 8 ohms nominal, 4.5 ohms minimum
- Recommended amplifier power: 30 – 130 watts per channel
- Connections: gold-plated bi-wire binding posts with jumpers
- Finish: high gloss black
- Made in Canada by Energy Loudspeakers, Scarborough, Ontario
- Dimensions: (Height x Width x Depth) 17.75 x 9.7 x 9.75 inches (451 x 246 x 248 mm)
- Weight: 19 lbs (8.6 kg) each
🔌 Speaker Cable, Bi-Wiring and Connectors
The dual posts here take bare wire, spades, pins or bananas, and they mean you can bi-wire or bi-amp if you ever want to. Our bi-wire speaker bridges replace the factory straps with something considerably better made. We hand-build speaker cable here in any length you need on our Custom Speaker Cable Builder, terminated with our own gold-plated banana plugs or spade connectors. 👉
✅ Buy With Confidence — The Radique Promise
Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.
📦 Watch how we protect your gear — our unboxing video.
📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!
📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.
| Weight | 40 lbs |
|---|---|
| Dimensions | 13.75 × 25.4 × 21.75 in |
| Impedance | 8 Ω |
| Power Handling | 101–200 W |
| Sensitivity | 86–89 dB |
| Woofer Size | 6–7″ |
| Finish | Gloss Black, Rosewood |
You may also like…
Energy Connoisseur CC-10 Centre Channel – 92dB, 200W
Tweeter and woofers sit as close together as physically possible — Energy's Convergent Source Module — so they behave as one source and hold the balance across a wide seating area rather than one chair. Dual 5.5-inch woofers on the patented Ribbed Elliptical Surround, a 1-inch hyperbolic aluminium dome, 92 dB and up to 200 watts, rear-ported to 60 Hz. The grille is not included. Condition very good.
23.5″ Metal Speaker Stands — Concealed Cable Routing, Pair
A heavy pair of 23.5-inch stands that put a bookshelf speaker's tweeter at seated ear height and hide the cable inside the pillar. Wide 10 by 12-inch base under a 6 by 6-inch top plate, 12.4 lb each, fillable with sand or shot if you want more mass. Fitted with our own magenta felt pads. Black, matte finish, pair.
Gold Plated Banana Plugs by Radique Audio – Dual Set Screws
Dual set screws rather than a single screw or a compression sleeve, so the wire is held at two points and will not work loose behind the rack. Six-leaf gold-plated springs for a tighter grip in the binding post, full-length non-conductive jackets colour-coded for polarity, and gentle knurling that will not fray heavy cable. 19.4 g a pair, 25% heavier than the brand we used to carry. Fits 12 to 18 AWG.
IsoAcoustics ISO-PUCK Mini Isolators (Pack of 8)
- ✔️ Genuine IsoAcoustics ISO-PUCK Mini isolators, brand new in box
- ✔️ 8-pack for lighter speakers, studio monitors, turntables, mixers, and similar gear
- ✔️ Each puck measures 1.7” x 0.9” and supports up to 6 lbs (2.75 kg)
- ✔️ Use 3 or more per item depending on weight to reduce vibration transfer and improve clarity
- ✔️ Backed by a 2-year manufacturer’s warranty in Canada
Radique Audio High Density Felt Pads – 1 Inch Magenta, 8-Pack
High density felt in our signature Magenta, 1 inch across and a full 5 mm thick, with a self-adhesive backing that grips any smooth surface. Fitted under speakers, components and stands, they keep the surface below free of rings and scratches and take the edge off cabinet vibration. We use them throughout our own shop, from small satellites to large towers and on vintage receivers well into the three-thousand-dollar range. Sold in packs of 8.
Custom Speaker Cable Builder
🎯 Your specs, your cable — choose cable type, length & connectors
💰 Live pricing — price updates instantly as you configure
↔️ Bi-wire capable — available on Kimber 4PR, Kimber 4TC and House Quad
🔥 Heat-shrink reinforced — colour-coordinated at every termination & joint
🍁 Hand-assembled in Ottawa — backed by our Bumper-to-Bumper Warranty
Related Products
Bowers & Wilkins WM2 Outdoor Speakers, Pearl White, w/ Brackets
On an outdoor speaker the condition is the whole story — these are almost never retired for how they sound, but for sun turning a white cabinet chalky and yellow, freeze-thaw working at the seams, and grilles blooming with rust. Pearl White shows all of it more plainly than black would, and this pair grades Very Good, factory wall brackets included. B&W did not design a weatherproof box and then find a driver to fit it either: a 130 mm woven fibreglass cone crossed at 3.5 kHz to a 25 mm dome, the same material philosophy as their indoor speakers.
Castle Knight 1 Bookshelf Speakers — Real Wood Cherry, Pair
From a Yorkshire company that spent forty years being known for its cabinets above all else. The cherry veneer is deep-figured real timber, book-matched across the two cabinets so the grain mirrors when they are set up together, then sealed and waxed by hand over more than five days. Underneath is an honest two-way bass-reflex with a 130 mm woven natural-fibre bass/mid driver and five-way binding posts. Very Good condition.
Rectilinear XI Speakers — Lattice Grilles, Walnut, Recapped, USA
Linn Katan Bookshelf Speakers, Pair — Cherry, Made in Scotland
A pair of Linn Katan bookshelf loudspeakers in cherry, built in Glasgow, Scotland.
✔️ Condition: Very Good
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Fisher XP-65S Speakers, Pair — Walnut, Refoamed, 3-Way Sealed
A pair of Fisher XP-65S three-way sealed speakers, freshly refoamed, in walnut.
✔️ Condition: Very Good — walnut cabinets present well
✔️ woofers freshly refoamed in-house
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Realistic Optimus-21 Speakers, Pair — Walnut, Serviced, Japan
A pair of Realistic Optimus-21s, fully gone through, in their original oiled walnut veneer.
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Paradigm Titan v1 Bookshelf Speakers – Vifa Tweeters, Canada
The original Canadian-built Titan, the version with the Danish Vifa tweeter.
✔️ Condition: Good — presents as very good overall with one exception: a ding in the side of one cabinet
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Avant 1AX Bookshelf Speakers, Pair – Canadian, Real Wood Veneer
A matched pair of Avant 1AX bookshelf speakers: Canadian-built, dressed in real wood veneer, with freshly refoamed woofers and sequential serial numbers.
✔️ Good condition — the real wood veneer is sound, with light scuffs on the tops
✔️ Woofers refoamed on our bench with new surrounds
✔️ Made in Canada — a sequential-serial matched pair
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Mission 731 Bookshelf — Made in England, Inverted Driver Design
Two things to tell you: a ding on the top side edge of one cabinet, and third-party binding posts a previous owner fitted to one speaker. Otherwise good — and the design is the interesting part, since Mission's inverted geometry puts the tweeter below the woofer to bring the two into step at seated ear height. Made in England.





















