Pair of 4′ Monster Cable Z Series Z1R Reference Speaker Cables
$95.00
A four-foot pair from Monster’s Z Series, terminated at both ends with Monster’s own banana plugs. Twisted copper strands around a central core, PEX dielectric, and the multiple-gauge Time Correct network Monster used at the top of the range. Heavy for their length, and short enough to suit a bookshelf pair or a compact home theatre run.
1 in stock
Monster Cable Z Series Z1R Reference Energy Coherent Speaker Cable – 4′ Pair
From Monster:
“Elevate your audio experience with the Monster Cable Z Series Z1R Reference Energy Coherent speaker cables. Crafted for discerning audiophiles, these high-performance cables are designed to unlock the full potential of your stereo or home theater system.
The Z1R features Monster’s advanced cable technologies:
Time Correct multiple gauge wire networks for increased clarity
PEX dielectric for a lower noise floor
MultiTwist construction for improved reproduction of inner detail
Magnetic Flux Tube for more natural music reproduction
These 4-foot cables boast a compact, multi-gauge wire network design that delivers audiophile-grade sound quality. They excel at revealing nuances in your music, enhancing clarity, and improving overall sound reproduction. The Z1R is particularly effective with high-end bookshelf speakers and smaller home theater setups.”
Specifications:
Length: 4 feet (1.22 meters)
Connector: Terminated at both ends with Monster Audio Banana Plugs
Construction: Twisted copper strands with a central core
Insulation: High-quality PEX dielectric
Experience the difference that premium cabling can make in your audio setup. The Monster Cable Z Series Z1R Reference Energy Coherent speaker cables offer a compelling upgrade for those seeking to maximize their system’s performance.
Asking $95 for this very heavy, impressive looking pair of 4′ Z Series Speaker Cables from Monster.
| Weight | 7 lbs |
|---|---|
| Dimensions | 8 × 10 × 2 in |
Related Products
Intensifier Audio 14AWG Speaker Cables 8.5ft Pair, Banana Plugs
Eight feet six inches a side of heavy 14 AWG twin-conductor — denser in the hand than most 14 gauge, with thick insulation that resists kinking and lies flat along a baseboard. Fourteen gauge is the recommended minimum out to about fifty feet on an 8-ohm load, so at this length there is conductor to spare. Terminated here with our own banana plugs at all four ends and heat-shrunk at every joint.
Micca 14AWG Pure Copper Speaker Cables — 6ft Pair, Banana Plugs
4′ 14 AWG Monster XP Cables w/ Spades & Banana Plugs
A pair of four-foot runs of 14 AWG Monster XP speaker wire, terminated at both ends: Radique Audio banana plugs at one end, Radique Audio spade connectors at the other. Four feet is a short run — amplifier and speakers sitting close together, with nothing to strip and nothing left over. Eighty-five dollars for the set.
Attractive Pair of 42″ Acoustic Research Flat Speaker Cables
Acoustic Research's flat pure-copper cable in 16 gauge, cut to 42 inches and terminated here with our own banana plugs, with colour-coordinated shrink tubing over every joint and endpoint. The lay-flat profile is the reason to buy them — they run under a rug or along a baseboard where round cable will not. Sold as a pair.
Pair of 4′ 13 AWG Kimber Kables with Banana Plugs
Eight strands of 19.5 AWG oxygen-free copper braided in Kimber's black and brown jacket — four strands per leg, which aggregates to 13 AWG a side. Polyethylene dielectric, and the braid keeps series inductance to 0.23 µH per metre. Four feet a side, terminated at both ends with Radique Audio banana plugs.
Pair of 6′ Canare 4S8 13 AWG Speaker Cables (B/S)
Canare's 4S8 in a four-conductor star-quad geometry — every conductor the same distance from the centre, so the opposing magnetic fields cancel and the cable radiates far less interference into whatever runs beside it. 13 AWG, low capacitance and resistance, and flexible even below freezing. Terminated here with our own banana plugs at one end and spade connectors at the other.
AudioQuest Indigo+ 8′ Bi-Wire Speaker Cables – Made in USA
AudioQuest Indigo+ core wire — solid-core conductors in AudioQuest's Hyperlitz spiral, long out of production and still sought after. Re-terminated here for true bi-wire on freshly stripped core with our own gold-plated bananas: one pair at the amplifier end, two at the speaker. Eight-foot matched pair.
