Description

Polk Audio RTi10 Floorstanding Speakers – Rare Cherry Real Wood Finish, Very Good Condition, Tested

Experience the high-impact performance and stunning craftsmanship of these Polk Audio RTi10 towers—a premium 4-driver design that combines room-filling sound with the timeless beauty of real cherry wood veneer. Far rarer than the standard black oak finish, this cherry pair offers a furniture-grade aesthetic that warms any room while delivering the powerful, wide-open response Polk is famous for. Thoroughly tested and in very good cosmetic condition, these speakers are ready to breathe new life into your music and movies.

Dynamic Balance & 4-Driver Power:
The RTi10 features Polk’s latest generation of Dynamic Balance® drivers, laser-engineered to eliminate distortion-causing resonances. The 4-driver array is perfectly optimized for full-range impact:

1″ Silk/Polymer Dome Tweeter: Redesigned for stellar treble extension and airy detail without harshness.

6.5″ Polymer Composite Midrange: Delivers solid, natural vocals and instruments, housed in its own tuned enclosure with ARC (Acoustic Resonance Control) technology to ensure rich, uncolored midrange.

Dual 7″ Polymer Composite Woofers: Provide the room-rumbling bass authority that only a large tower can deliver—tight, punchy, and deep.

Advanced Cabinet Engineering:
The RTi10 utilizes Power Port Plus technology—a system of front and rear ports working with internal plates to reduce noisy air turbulence (chuffing) and dramatically increase bass efficiency. The result is visceral low-end impact that you can feel. The cabinet is finished in handsome real cherry wood veneer (not vinyl), a premium detail that elevates the RTi10 from “speaker” to “furniture.” The solid MDF construction minimizes internal resonances for cleaner sound reproduction.

Features & Build Quality:

Anti-Diffraction Grilles: Designed to minimize sonic interference for a large, open, three-dimensional soundstage with pinpoint imaging.

Bi-Amp/Bi-Wire Capable: Dual sets of gold-plated 5-way binding posts allow for advanced connection options to extract maximum performance.

Stabilizing Outriggers: Integrated stabilizing base with wide footprint for superior stability.

Radique Audio Felt Pads: Pre-mounted with our high-density felt pads, ideal for hardwood, laminate, or tile floors—protects your surfaces while providing a stable, acoustically neutral foundation.

Video Shielded: Safe for placement near legacy CRT televisions or sensitive electronics.

Specifications:

Design: 3-Way, Bass Reflex with Power Port Plus

Drivers: 1″ (25mm) Silk/Polymer Dome Tweeter, 6.5″ (165mm) Midrange, Dual 7″ (178mm) Woofers

Frequency Response: 35Hz – 26kHz (-3dB limits) / 20Hz – 27kHz (Total)

Impedance: 8Ω Nominal

Sensitivity: 89 dB

Recommended Amplifier Power: 20 – 300 Watts per channel

Terminals: Dual Gold-Plated 5-Way Binding Posts

Finish: Real Cherry Wood Veneer

Dimensions: 279 x 1108 x 451 mm (11″ W x 43.6″ H x 17.8″ D) – including outrigger base

Weight: 29.9 kg (66 lbs) per speaker

Condition:
This pair is in very good cosmetic condition. The rare cherry wood veneer is rich and attractive, showing only minor signs of age consistent with responsible ownership. The grilles are intact and clean.

Functionally Tested: All drivers (tweeters, midranges, and woofers) have been sweep-tested and verified to perform perfectly with no rubbing, buzzing, or distortion.

Summary:
The Polk RTi10 represents the sweet spot of high-performance audio: serious engineering that delivers massive, detailed sound, wrapped in a cabinet that looks like fine furniture. The rare cherry finish makes this pair a standout choice for those who want their speakers to look as good as they sound. With 300 watts of power handling and genuine deep bass capability, they are equally at home anchoring a high-end stereo system or a powerful home theater. Ready to place on hard floors with our premium felt pads already installed.

Purchase with Confidence

Includes Radique Audio “Bumper to Bumper” Warranty

Perpetual Trade-Back Policy—upgrade or swap with peace of mind

Real wood craftsmanship—tested, very good condition, ready to play; asking $795.

Additional information
Weight138 lbs
Dimensions22 × 28 × 47.6 in
About brand
Polk Audio at Radique
New Polk Audio, too, quoted direct from the Canadian distributor:
We service Polk, too. Bring us your own Polk speakers and subwoofers for repair, servicing or restoration (speakers up to 80 lbs each), with a 90-day warranty on the work. See our Audio Service page

Polk Audio began in Baltimore in 1972, founded by Matthew Polk, George Klopfer and Sandy Gross. Its SDA speakers of the 1980s used a cable between the left and right speakers to widen the stereo image. We carry Polk towers, bookshelf speakers, centre channels and subwoofers. We've had more than 180 Polk listings so far, covering more than 80 different models. Every used Polk here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Looking for new Polk? We also quote new Polk Audio direct from the Canadian distributor, with free shipping within Canada: request a quote below. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our five best-selling Polk models so far: the RTi10 towers, the PSW10 and PSW125 subwoofers, the RTi4 bookshelf speakers and the CSi3 centre.

The Polk story, 1972 to today

Matthew Polk, George Klopfer and Sandy Gross, graduates of Johns Hopkins, founded Polk Audio in Baltimore, Maryland, in 1972. The Monitor 7 of 1974 was their first model to succeed, and the Monitor 10 followed in 1976.

SDA. In 1984 Polk introduced SDA (Stereo Dimensional Array). A cable between the left and right speakers lets each one cancel the sound that crosses over to the wrong ear, for a wider stereo image.

Growth. Polk went public in 1986 and moved to new premises in Baltimore. It began moving manufacturing to Tijuana, Mexico, in 1988, and by 2012 Stereophile reported that Polk designed in the US and built in China.

New owners. Directed Electronics agreed to buy Polk in 2006. Polk later became part of Sound United, Masimo bought Sound United in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 2018 Legend series brought SDA back.

Which Polk is which?

Monitor (1970s to early 1990s): the Monitor 4, 5, 7, 10 and 12, with A, B and C revisions.

SDA (1984 to about 1991): the SDA-1 and SDA-2 families, CRS, SRS and the later "TL" models.

RTA (1979 to 1992): towers such as the RTA 11t, with two woofers and two passive radiators.

RT and RTi (2001 onward): Polk's lower-priced lines. Our best-selling RTi10 towers and RTi4 bookshelf speakers come from here.

CSi centres and PSW subwoofers: the CSi3 centre and the PSW10 and PSW125 subwoofers are among the Polks we sell most.

LSi (about 2001 to 2010) and LSiM (2011): Polk's flagship lines of that decade, followed by Signature (2016), Legend (2018) and Reserve (2021).

Buying used Polk: what to check

SDA cable. SDA speakers need the interconnect cable between them for the SDA effect, and early SDA models need a common-ground amplifier. Make sure the cable comes with the pair.

Tweeters. Owners report that some SL3000 tweeters on the 1989 to 1991 SDA TL models leaked their ferrofluid and failed, and that Monitor-series pairs may carry mismatched factory or replacement tweeters. Check that every tweeter plays.

Surrounds. Some early Polks used foam surrounds, which rot with age; later models such as the RTA 11t and LSiM use rubber. Press gently on each woofer surround.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.