Description

Polk Audio RTi4 Real Wood Bookshelf Speakers — Pair

A refined and capable pair of bookshelf speakers from Polk Audio’s acclaimed RTi series, finished in genuine black oak wood veneer over acoustically inert MDF construction.

The RTi4 represents a significant evolution of Polk’s best-selling bookshelf line. Stereophile praised the design for its open, neutral midrange and pristine, extended high-frequency response — a testament to Polk’s Dynamic Balance driver technology, which uses laser interferometry to identify and eliminate resonance-inducing distortion across the entire cone surface. The 5.25-inch polymer composite woofer and redesigned 1-inch silk/polymer dome tweeter deliver a remarkably smooth, detailed sound that rewards careful listening with well-recorded material.

Two proprietary Polk bass technologies work in concert to extend low-frequency performance well beyond what the compact cabinet size would suggest. The rear-firing Power Port replaces a conventional bass port with a specially shaped diffuser cone that smooths turbulent airflow, reducing port noise and delivering cleaner, deeper bass. The ARC (Acoustic Resonance Control) port further refines midrange clarity by reducing internal standing waves. The result is surprisingly full, natural sound down to 50 Hz — impressive for a bookshelf speaker of this size.

The cabinet itself reflects serious attention to detail. Real black oak wood veneer over 3/4-inch MDF with extensive internal bracing virtually eliminates sound-muddying cabinet resonance. Dual gold-plated 5-way binding posts allow for bi-amping or bi-wiring, and an integrated keyhole slot enables wall mounting. These speakers perform beautifully as stereo mains in a small to medium room, or as surrounds in a larger home theater system.

Specifications:

Type: 2-way bass reflex bookshelf speaker (pair)

Tweeter: 1-inch (25 mm) silk/polymer composite dome

Woofer: 5.25-inch (133 mm) Dynamic Balance polymer composite cone

Crossover frequency: 1.9 kHz (12 dB/octave slopes)

Frequency response: 60 Hz – 26 kHz (-3 dB)

Frequency range: 50 Hz – 27 kHz

Sensitivity: 89 dB (2.83V/1m)

Impedance: 8 ohms

Recommended amplifier power: 20 – 125 watts

Connections: dual gold-plated 5-way binding posts (bi-amp/bi-wire capable)

Wall mountable via integrated keyhole slot

Cabinet: 3/4-inch MDF with internal bracing

Finish: real black oak wood veneer

Dimensions (each): (Width x Height x Depth) 6.94 x 12 x 11.31 inches (176 x 305 x 287 mm)

Weight (each): 12 lbs (5.4 kg)

A genuinely musical bookshelf speaker with real wood veneer, advanced bass technology, and the kind of detail retrieval that earned praise from Stereophile. An excellent choice for stereo or home theater use.

Backed by Radique Audio’s 90-day warranty and our perpetual trade-back policy, you can purchase with confidence.

Additional information
Weight26 lbs
Dimensions15.3 × 20 × 16 in
About brand
Polk Audio at Radique
New Polk Audio, too, quoted direct from the Canadian distributor:
We service Polk, too. Bring us your own Polk speakers and subwoofers for repair, servicing or restoration (speakers up to 80 lbs each), with a 90-day warranty on the work. See our Audio Service page

Polk Audio began in Baltimore in 1972, founded by Matthew Polk, George Klopfer and Sandy Gross. Its SDA speakers of the 1980s used a cable between the left and right speakers to widen the stereo image. We carry Polk towers, bookshelf speakers, centre channels and subwoofers. We've had more than 180 Polk listings so far, covering more than 80 different models. Every used Polk here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Looking for new Polk? We also quote new Polk Audio direct from the Canadian distributor, with free shipping within Canada: request a quote below. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our five best-selling Polk models so far: the RTi10 towers, the PSW10 and PSW125 subwoofers, the RTi4 bookshelf speakers and the CSi3 centre.

The Polk story, 1972 to today

Matthew Polk, George Klopfer and Sandy Gross, graduates of Johns Hopkins, founded Polk Audio in Baltimore, Maryland, in 1972. The Monitor 7 of 1974 was their first model to succeed, and the Monitor 10 followed in 1976.

SDA. In 1984 Polk introduced SDA (Stereo Dimensional Array). A cable between the left and right speakers lets each one cancel the sound that crosses over to the wrong ear, for a wider stereo image.

Growth. Polk went public in 1986 and moved to new premises in Baltimore. It began moving manufacturing to Tijuana, Mexico, in 1988, and by 2012 Stereophile reported that Polk designed in the US and built in China.

New owners. Directed Electronics agreed to buy Polk in 2006. Polk later became part of Sound United, Masimo bought Sound United in 2022, and in September 2025 HARMAN, a Samsung company, completed its purchase of Sound United. The 2018 Legend series brought SDA back.

Which Polk is which?

Monitor (1970s to early 1990s): the Monitor 4, 5, 7, 10 and 12, with A, B and C revisions.

SDA (1984 to about 1991): the SDA-1 and SDA-2 families, CRS, SRS and the later "TL" models.

RTA (1979 to 1992): towers such as the RTA 11t, with two woofers and two passive radiators.

RT and RTi (2001 onward): Polk's lower-priced lines. Our best-selling RTi10 towers and RTi4 bookshelf speakers come from here.

CSi centres and PSW subwoofers: the CSi3 centre and the PSW10 and PSW125 subwoofers are among the Polks we sell most.

LSi (about 2001 to 2010) and LSiM (2011): Polk's flagship lines of that decade, followed by Signature (2016), Legend (2018) and Reserve (2021).

Buying used Polk: what to check

SDA cable. SDA speakers need the interconnect cable between them for the SDA effect, and early SDA models need a common-ground amplifier. Make sure the cable comes with the pair.

Tweeters. Owners report that some SL3000 tweeters on the 1989 to 1991 SDA TL models leaked their ferrofluid and failed, and that Monitor-series pairs may carry mismatched factory or replacement tweeters. Check that every tweeter plays.

Surrounds. Some early Polks used foam surrounds, which rot with age; later models such as the RTA 11t and LSiM use rubber. Press gently on each woofer surround.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.