Sherwood S-2620 CP AM/FM Stereo Receiver – Compact 1980s Design
$195.00
Twenty watts a channel into 8 ohms at 0.05% distortion, with 95 dB signal-to-noise on the line inputs and 80 dB on MM phono at 2.5 mV. Tape monitor loop and A/B speaker switching, in a matte black chassis 3.7 inches tall and 17.3 wide. Made in Korea, 1983–86. Tested throughout; very good cosmetic condition.
1 in stock
Sherwood S-2620 CP AM/FM Stereo Receiver – Compact Black Finish, 20 WPC
Experience the straightforward, no-nonsense performance of the Sherwood S-2620 CP—a compact receiver from the mid-1980s that proves less is often more. Finished in a sleek matte black, this unit delivers an honest 20 watts per channel with remarkably clean specifications. Built during Sherwood’s solid-state era (1983-1986), it prioritizes audio quality over gimmicks, offering an impressive 0.05% THD and 95dB signal-to-noise ratio that rivals units twice its price. Thoroughly tested and in very good cosmetic condition, it’s an ideal solution for bedroom systems, offices, or secondary listening zones where space is at a premium.
Clean Power & Excellent Tuner:
The S-2620 CP delivers 20 watts per channel into 8Ω with extraordinarily low distortion (0.05%)—a specification that ensures clean, transparent sound reproduction. The damping factor of 45 provides tight control over speakers, while the wide frequency response (5Hz to 40kHz) captures the full audio spectrum. Sherwood built their reputation on exceptional tuners, and the S-2620 CP continues that legacy with sensitive, stable reception that pulls in distant stations with clarity.
Slider Controls & Flexible Connectivity:
This receiver features distinctive slider-style tone controls (bass and treble) for precise adjustment, along with loudness compensation and a subsonic filter. The all-black front panel is clean and modern—no unnecessary bells or whistles, just straightforward operation.
Phono (MM): Quiet 2.5mV sensitivity for turntables.
Line Inputs: exceptionally quiet (95dB S/N) for CD/Aux sources.
Tape Monitor: Full loop for recording or EQ.
Two Speaker Pairs (A/B): Switch between rooms or run two pairs.
Compact Footprint:
At just 3.7″ tall, the S-2620 CP is one of the most space-efficient receivers of its era. Its slim black profile disappears into bookshelves, desktops, or tight AV cabinets where larger receivers won’t fit.
Specifications:
Power Output: 20W per channel into 8Ω (stereo, continuous RMS)
Total Harmonic Distortion: 0.05% (Very low for its class)
Frequency Response: 5Hz – 40kHz
Signal-to-Noise Ratio: 80dB (Phono), 95dB (Line)
Dimensions: 440 × 95 × 300 mm (17.3″ × 3.7″ × 11.8″)
Weight: 6.6 kg (14.5 lbs)
Year: 1983–1986
Made in: Korea
Condition:
This unit is in very good cosmetic condition. The black faceplate is clean, the slider controls operate smoothly without noise, and the chassis shows minimal wear consistent with age.
Functionally Tested: All inputs verified clean; FM/AM tuner locks stations reliably; both speaker outputs working perfectly.
Summary:
The Sherwood S-2620 CP proves that great sound doesn’t require massive power or endless features. With its compact footprint, clean specifications, and reliable engineering, it’s the perfect black-component receiver for vintage vinyl setups or office systems where simplicity and quality matter more than watts.
Purchase with Confidence
Includes Radique Audio “Bumper to Bumper” Warranty
Perpetual Trade-Back Policy—upgrade or swap with peace of mind
Classic Sherwood simplicity—tested and ready to play.
Asking just $195 for this clean vintage Sherwood Receiver.
| Weight | 16.5 lbs |
|---|---|
| Dimensions | 16 × 21.3 × 7.7 in |
Related Products
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
