Anthem MRX 310 5.1 AVR with 7 x 4K HDMI, accessories MRX 310
$695.00
Out of stock
Email when stock available
Anthem MRX 310 AV Receiver – Fully Tested, Includes Original Box, Manual, Microphone, and Remote
Elevate your home theater experience with the Anthem MRX 310—a premium 5.1 channel AV receiver from one of Canada’s most respected audiophile brands. This MRX 310 has been thoroughly tested and works perfectly in every respect. It comes complete with the original box, manual, ARC calibration microphone, and genuine Anthem remote—offering an opportunity to own an exceptionally well-cared-for unit with all the original accessories.
The MRX 310 delivers Anthem’s acclaimed room correction (ARC 1M), precision amplification, and flexible connectivity in a beautifully built package. With 60 watts x 5 channels (all channels driven) and Anthem’s legendary Class AB amplifier design, it brings outstanding musicality and dynamic range to medium and smaller home theaters. Enjoy 7 rear HDMI inputs (with dual HDMI outputs), full support for Dolby TrueHD, DTS-HD Master Audio, and 4K video pass-through. Pre-outs for all 5.1 channels allow easy upgrades to more powerful external amplifiers in the future.
Anthem’s award-winning ARC room correction ensures top-tier performance regardless of your room’s acoustics. The receiver’s comprehensive input selection includes multiple digital and analog inputs, component and composite video, and support for dual speaker configurations and trigger outputs—making system integration straightforward and reliable.
Key Features:
Anthem Room Correction (ARC 1M) for tailored sound in any space (setup mic included)
5.1 channels, 60W x 5 (all channels driven, 8 ohms), 80W x 2 (stereo)
Seven HDMI inputs (HDMI 1.4a, dual HDMI outputs, 4K upscaling and pass-through)
Support for Dolby TrueHD, DTS-HD MA, AnthemLogic, Dolby Volume, and more
High-quality DAC/ADC (Cirrus Logic 24-bit/192kHz, 114dB dynamic range)
5.1 pre-outs for external amplification or future system upgrades
Comprehensive input selection: analog, digital, component/composite video
Dual speaker configuration memory and flexible crossover settings
Class AB amplifier for audiophile sound quality
Ethernet and USB for firmware and ARC setup
Original remote, setup microphone, manual, and factory double box included
Specifications:
Power Output: 60W x 5 (8 ohms, all channels driven, 0.1% THD)
Frequency Response: 10Hz–30kHz (+0, -0.5dB)
THD+N: <0.04% (20Hz–20kHz, 1W)
Signal-to-Noise: 101dB (IEC-A filter)
Inputs: 7x HDMI in (2x out), 2x component, 1x composite, 5x stereo RCA, 2x coax, 3x optical digital
Dimensions: 17.25″ W × 6.5″ H × 14.6″ D (44 × 16.4 × 37.2 cm)
Weight: 27.8 lbs (12.6 kg)
This Anthem MRX 310 is ideal for the discerning listener seeking both flexibility and audiophile performance, with the added confidence of complete original packaging and accessories.
Originally listed new for $1199 USD ~ $1875 CDN with HST. Asking just $695 for this great quality, feature rich AVR with original packaging and accessories; buy with confidence and benefit from Radique’s “Bumper to Bumper” warranty and Perpetual trade back policy.
| Weight | 31 lbs |
|---|---|
| Dimensions | 18.6 × 21.25 × 10.5 in |
Related Products
Harman Kardon AVR 3600 7.1 AV Receiver — 560W, 4 x HDMI, 2 Zones
Yamaha RX-V561 5.1 AVR 500W — 2x HDMI, 3 Digital In, Remote
100 watts minimum RMS on every one of the five channels into 8 ohms, and dynamic power that climbs to 110, 130, 160 and 180 watts into 8, 6, 4 and 2 ohms — a receiver that keeps increasing output as the load gets harder has a supply with something in reserve. Where it earns its keep is bass management: a crossover selectable across nine points from 40 Hz to 200 Hz with a 12 dB per octave high-pass on front, centre and surround. Two HDMI inputs, three digital, remote included. Very good condition.
JVC RX-664V A/V Receiver — 100W x 5, Phono, SEA EQ, Sub Out
Denon AVR-1800 5.1 AV Receiver 75 WPC — Made in Japan
Denon AVR-2700 5.1-Channel AV Receiver 400W w/ Remote – Japan
Eighty watts to every one of the five channels, equally rated, at 0.05% distortion. Coaxial and optical digital inputs, composite and S-video switching, Dolby Digital and Pro Logic, a five-channel stereo mode, and a moving-magnet phono stage at 2.5 mV. Tape monitor loop for an outboard EQ. Made in Japan in 1999, original Denon remote included. Very good condition.
Yamaha RX-V795A 5.1 AV Receiver – 425W Peak, Phono
Eighty-five watts into 8 ohms on each of five channels at 0.04% distortion, with Dolby Digital, DTS and Yamaha’s Cinema DSP modes. An MM phono input, three optical and one coaxial digital input, and a full set of 5.1 pre-outs if you later want outboard amplification. Ships with a new compatible remote, not the original. Level 1 serviced; very good condition.
Pioneer VSX-D511 5.1 AVR — 500W Total, Coax & Optical
One hundred watts a channel across all five into 8 ohms, so 500 watts of system power, with Dolby Digital, DTS and Pro Logic II decoding through a 96kHz/24-bit DAC. One coaxial and one optical digital input, three composite/S-Video inputs, a subwoofer pre-out, and a 30-preset AM/FM tuner. Original Pioneer remote. Very good condition, tested.
Yamaha HTR-5170 425W AV Receiver – Phono, Dolby Digital & DTS
Eighty-five watts into 8 ohms on all five channels, measured across 20 Hz to 20 kHz at 0.04% distortion — rated the honest way rather than at a single frequency. A rear-panel selector takes the mains down to 4 ohms. Dolby Digital, DTS and Cinema DSP, MM phono, three optical and one coaxial digital input, and full 5.1 pre-outs. Same platform as the RX-V795a; 28.7 lbs.
Harman Kardon AVR 1510S 375W 5.1 Receiver – 4K HDMI, Spotify
Seventy-five watts to each of five channels, four 3D-ready HDMI inputs with 4K pass-through, and one HDMI output with ARC. Spotify Connect, vTuner and DLNA over Ethernet, front-panel USB, optical and coaxial digital in. A digital supply keeps the whole thing to ten pounds. Level 1 serviced here; cosmetically graded Good.
