Marantz NR1510 Slim 5.2 AV Receiver – 4K, Wi-Fi, Phono, Remote

$495.00

A slim Marantz NR1510 5.2-channel AV receiver, just over 4 inches tall, with 4K HDR video switching, HEOS streaming over Wi-Fi, Bluetooth and AirPlay 2, and a phono input for your turntable. It is in excellent condition, comes with its original Marantz remote, and has been thoroughly tested on our bench.

✔️ Excellent condition, with the original Marantz RC040SR remote
✔️ 4K HDR with Dolby Vision and eARC, HEOS, Wi-Fi, Bluetooth and AirPlay 2
✔️ Phono input and two subwoofer outputs — thoroughly tested on our bench
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping

1 in stock

Description

A slim Marantz NR1510 5.2-channel AV receiver, just over 4 inches tall, with 4K HDR video switching, HEOS streaming over Wi-Fi, Bluetooth and AirPlay 2, and a phono input for your turntable. It is in excellent condition, comes with its original Marantz remote, and has been thoroughly tested on our bench.

What it is

The NR1510 is Marantz’s slimline home theatre receiver: a full 5.2-channel AV receiver in a chassis about half the height of a typical one, so it fits in a media cabinet or under a TV where a full-size receiver won’t. It is rated at 50 watts per channel into 8 ohms, 20 Hz to 20 kHz, with two subwoofer outputs for a 5.2 system. Front pre-outs let you add a power amplifier for the main speakers later, and all five channels connect through screw binding posts that take bare wire or banana plugs; we recommend our own Radique Audio gold-plated banana plugs, and our Custom Speaker Cable Builder will make a set to length.

For the picture, it has six HDMI inputs, one of them on the front panel, and one output, passing 4K at 60 Hz with HDR10, HLG and Dolby Vision and full HDCP 2.3 support. Your TV’s sound comes back down the same HDMI cable over eARC. It decodes Dolby TrueHD and DTS-HD Master Audio from Blu-ray and streaming boxes, and Audyssey MultEQ room correction, with Dynamic EQ and Dynamic Volume, tunes the system to your room.

For music, HEOS is built in, so it streams over Wi-Fi or Ethernet from Spotify Connect, TIDAL, Deezer, Pandora, SiriusXM and TuneIn, and plays as part of a HEOS multi-room setup. AirPlay 2 and Bluetooth cover phones and tablets, it plays hi-res FLAC, ALAC and WAV files up to 24-bit/192 kHz and DSD, and it works with Amazon Alexa, Google Assistant and Siri voice control. There is a moving-magnet phono input too, so a turntable plugs straight in with no separate phono stage.

The service it has had

Thoroughly tested on our bench before listing, every input and output:

Condition

Excellent, and free of visible marks. The original Marantz RC040SR remote is included.

Slim enough for any cabinet, with 4K HDR, streaming built in and a phono input: a modern Marantz to run a whole system from.

Available for pickup in Kanata, or shipped across Canada and internationally, packed in-house in 275 lb test double-wall boxes. Live shipping rates for your address are calculated at checkout. Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. Available for audition by appointment in Kanata.

Marantz NR1510 Specifications

  • Each HDMI input and the HDMI output
  • Phono, optical, coaxial and analog inputs
  • Both subwoofer outputs
  • Wireless features: Wi-Fi, Bluetooth and AirPlay 2
  • Type: slimline 5.2-channel AV receiver
  • Power output: 50 watts per channel into 8 ohms, 20 Hz–20 kHz, 0.08% THD (two channels driven)
  • HDMI: 6 inputs (1 on the front) and 1 output, 4K/60 Hz 4:4:4, HDR10, HLG, Dolby Vision, HDCP 2.3, eARC
  • Surround decoding: Dolby TrueHD, DTS-HD Master Audio
  • Room correction: Audyssey MultEQ, Dynamic EQ, Dynamic Volume
  • Streaming: HEOS built-in, Wi-Fi (dual-band) and Ethernet, Bluetooth, AirPlay 2, Spotify Connect, TIDAL, Deezer, Pandora, SiriusXM, TuneIn
  • Hi-res playback: FLAC, ALAC and WAV up to 24-bit/192 kHz; DSD up to 5.6 MHz
  • Voice control: works with Amazon Alexa, Google Assistant and Siri
  • Phono: moving magnet (MM)
  • Other audio inputs: 3 analog, 1 optical, 1 coaxial, USB
  • Pre-outs: front left/right, plus 2 subwoofer outputs
  • Speaker terminals: 5 pairs of screw binding posts (bare wire or banana plugs)
  • Remote: original Marantz RC040SR included
  • Dimensions: (Width x Height x Depth) 17.3 x 4.1 x 14.5 inches (440 x 105 x 368 mm)
  • Weight: approx. 18.1 lbs (8.2 kg)

🔌 Speaker Cable, Built on Our Own Bench

The speaker terminals here take banana plugs — the quickest and tidiest connection there is, and the one you want if anything ever gets moved. We hand-build speaker cable here in any length you need on our Custom Speaker Cable Builder, terminated with our own gold-plated banana plugs. If you already have cable you are happy with, we sell the plugs on their own. 👉

🔊 Two Subwoofer Outputs — Two Cables

This receiver has two independent subwoofer outputs, so a pair of subs can each be fed properly rather than sharing a split signal. Our Gold Series Subwoofer Cable is the shielded lead for that run — one per subwoofer. 👉

⚠️ Important Information for International Buyers

This unit is configured for North American 110/120V power. Buyers outside North America will require a step-down transformer and appropriate plug adapter.

✅ Buy With Confidence — The Radique Promise

Backed by Radique Audio’s Bumper-to-Bumper Warranty and our Perpetual Trade-Back Program. When you’re ready to move on, we’ll take it back. That’s the Radique difference.

📦 Watch how we protect your gear — our unboxing video.

📺 Curious about our business? Check out our YouTube channel for behind-the-scenes videos and more!

📞 Questions? Use the Ask a Question button above, or call us at 613-416-9995.

Additional information
Weight20.1 lbs
Dimensions18.5 × 21.3 × 8.1 in
About brand
Marantz at Radique

Marantz began in 1953 in Queens, New York, where Saul Marantz built tube preamplifiers and amplifiers, and by the 1970s it was making receivers with champagne-gold faceplates, blue-lit dials and flywheel tuning. We carry Marantz receivers, amplifiers and preamps, turntables, tuners, CD players and cassette decks. We've had more than 150 Marantz listings so far, covering nearly 100 different models. Every used Marantz here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Many Marantz components were sold without their wood case, so we also make new cherry WC-22 and WC-10 style cabinets. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.

Our five best-selling Marantz models so far: the SR4023 stereo receiver, the vintage 2225, the SR7000 AV receiver, the SR4320 stereo receiver and the vintage 2238B.

The Marantz story, 1953 to today

Saul B. Marantz founded the company in New York in 1953. His first product, the Audio Consolette preamplifier, became the Model 1, and Marantz dates the first Consolettes to 1952–53. Marantz says the early factory was in Woodside, Queens.

The tube years. Through the late 1950s and early 1960s Marantz built a small run of tube separates in New York that collectors still chase: the Model 7 preamplifier (1958), the Model 9 power amplifier (1960) and the Model 10B tuner (1964).

Superscope and the move to Japan. In 1964 Superscope, the company that also distributed Sony tape recorders in the US, bought Marantz, and Saul Marantz resigned at the end of 1967. The Model Eighteen of 1968 was the first Marantz receiver, rated at 40 watts per channel. Under Superscope, design moved to California and, from the late 1960s, production moved to Japan through Standard Radio, which became Marantz Japan in 1975. Receivers such as the 2230 and 2270 are listed as designed in the USA and produced in Japan.

The power race. After a 1974 Federal Trade Commission rule tightened how amplifier power was rated, receiver makers competed on watts. Marantz's Model 2500 of the late 1970s was rated at 250 watts per channel and had an oscilloscope tuning display.

Philips, Denon and today. In 1980 Philips bought Superscope's stake in Marantz Japan and the brand outside the US and Canada. Marantz says its CD-63 of 1982 was one of the first CD players, and its "KI Signature" models carry the initials of Ken Ishiwata, who joined in 1978. In 2001 Marantz Japan bought the trademark back from Philips, and in 2002 it combined with Denon to form D&M Holdings. In September 2025 HARMAN, a Samsung company, completed its purchase of Sound United, the parent of Marantz and Denon.

Which Marantz is which?

Tube separates (1950s–60s): the Models 1, 7, 8B, 9 and 10B, built in New York. Rare collector pieces.

First receivers (from 1968): the Model Eighteen, followed by the Nineteen at the end of 1969.

22xx receivers (from 1972): the first set was the 2215, 2230, 2245 and 2270, with the champagne-gold faceplate, blue-lit dial and "Gyro-Touch" flywheel tuning. A higher number generally means more power: the 2230 is rated at 30 watts per channel, the 2270 at 70. Later "B" versions such as the 2220B and 2285B followed.

Big late-1970s receivers: the 2325 (125 watts per channel), the 2500 flagship and four-channel "Quad" receivers.

1000-series integrated amplifiers: for example the 1060 (30 watts per channel, from 1971), the 1070 and the 1150 (75 watts per channel). The slim 1030, 1040, 1060 and 1070 share their case size with tuners such as the 104, 105 and 112.

Tuners: from the tube Model 10B to solid-state models such as the 2130, with its oscilloscope display.

Wood cases: Marantz sold its wood cases separately: the WC-22 for the 22xx receivers, the WC-10 for the slim 1000-series amplifiers and 100-series tuners, and the WC-1 for larger models such as the 1200. That is why so many turn up bare. A customer who sold Marantz in Ontario in the 1970s told us the cases his shop ordered were built here in Canada, by Westinghouse. Our own cherry WC-22 and WC-10 style cabinets are made in Canada too.

CD players: from the CD-63 of 1982 to the KI Signature versions.

Buying used Marantz: what to check

Dial and meter lamps. Burnt-out bulbs are common on 1970s receivers and are often replaced, sometimes with LEDs. Ask which, if the look of the dial matters to you.

The dial itself. The diffuser sheet behind the dial ages and can dull the glow. Check that the Gyro-Touch pointer moves smoothly and tracks the stations; dial cords are a common replacement part.

Controls and switches. Crackle when you turn a control or work a switch usually means dirt. Try every input, and walk away from a unit that drops a channel.

Capacitors and bias. Electrolytic capacitors in 1970s gear are often past their best, and full restorations replace them. Restorers also set the bias and DC offset.

Cosmetics. Pitting on the faceplate points to damp storage, and dents or water stains to rough handling.

Everything we list is inspected, tested and serviced as required here, and comes with our warranty.