Mirage Nanosat Wall/Ceiling Mount Bracket (Original) | Radique
$15.00
- Genuine original Mirage factory wall/ceiling mount bracket for the Nanosat satellite speaker
- Compatible with all Nanosat v1 finishes — Black/Silver, All Black, and All White
- Single-screw keyhole slot system — speaker clicks on and off cleanly
- Positions speaker right-side up or inverted for ideal Omnipolar® sound dispersion
- Includes mounting screw
6 in stock
Keep your Mirage Nanosats off the shelf and up where they belong — these are the genuine original Mirage factory wall/ceiling mount brackets, designed specifically for the Nanosat satellite speaker.
Thanks to the Nanosat’s unique Omnipolar® design, wall and ceiling mounting is actually the ideal placement — the 360° sound dispersion means the speaker performs brilliantly even mounted high near the ceiling, filling the room evenly from any position. Mirage specifically engineered this bracket with that in mind.
Mount Features
- Genuine original Mirage factory bracket — not a generic third-party mount
- Single-screw installation with keyhole slot system — speaker clicks on and off cleanly
- Positions speaker right-side up or inverted — Mirage recommends inverted when mounted more than 6 feet off the floor, so the Omniguide points toward the listening position
- Holds speaker approximately ¼” from the wall for ideal Omnipolar® sound dispersion
Mount Specifications
- Dimensions: 2.76″ L × 1.42″ W × 0.63″ D (70 × 36 × 16 mm)
- Weight: 1.3 oz (37 g) — includes mounting screw
- Mounting: Single screw keyhole slot — hardware included
Compatibility
- Fits all Nanosat v1 finish variants: Black/Silver, All Black, and All White
- Speaker dimensions for reference: 5.8″ H × 4.3″ D × 4.2″ W (14.9 × 10.7 × 11.1 cm)
- Speaker weight: 2.9 lbs / 1.3 kg per speaker
Sold individually. Sourced from original Mirage Nanosat systems.
| Weight | .1 lbs |
|---|---|
| Dimensions | 3 × 2 × 1 in |
| Mirage Nanosats | Mirage Nanosats pair black & silver, Mirage Nanosats v1 mount |
You may also like…
Mirage Nanosat Satellite Speaker — Refurbished | Radique
The Mirage Nanosat is one of the most capable compact speakers ever made — a palm-sized powerhouse delivering a full 360° Omnipolar® soundstage that fills any room, from any position. 🎵
- >Available as a single speaker or a stereo pair
>Individually inspected, tested, and refurbished by the Radique team
>Covered by our Bumper-to-Bumper Warranty 🔵
>Optional wall/ceiling mount available — select from the options below
>📸 Photos show a stereo pair. Singles and pairs available — select your quantity below.
Related Products
Paradigm Cinema 330 v3 – Genuine Wall-Mount Bracket 330 v3 Wall-mount
The factory bracket for Paradigm's Cinema 330 v3 on-wall speaker, mating directly to the rear interface for a close-to-wall fit. It sits behind the cabinet and is largely hidden once installed, which is why we supply whatever colour is in stock — black, silver or white — and cannot guarantee a choice. Wall anchors and screws are not included.
KEF HTS7001 Matching Wall Mount Bracket
A rigid metal plate that screws to the back of an HTS7001 satellite — the two machine screws for that are included — and then hangs on two wall screws through integrated keyhole slots. It goes up vertically or horizontally, whichever suits the channel. Five inches long, in black, sitting discreetly behind the speaker. Wall anchors and screws are yours to supply. Excellent condition, lightly used.
Paradigm Cinema 330 v3 – Genuine Shelf-Mount Support 330 v3 Shelf-mount
The genuine Paradigm support that lets a Cinema 330 v3 sit horizontally on a shelf, mating with the speaker’s base and tilting so the tweeter can be aimed at ear level. Four inches by 3.75, 28 grams, and no additional hardware is needed. Stock comes in black, silver or white; the colour cannot be chosen in advance.
Paradigm Cinema 200/400/Trio – Horizontal Shelf-Mount Support
The genuine Paradigm support that lets a Cinema 200, 400 or Trio sit horizontally on a shelf rather than on a wall, with adjustable tilt so the tweeter can be aimed at ear height — which matters most when it is under a television. It stays visible in use and is styled to match. 4.75 by 4.5 inches, 57 grams. Supplied in black, silver or white as stock allows; the colour cannot be chosen.
Mirage Omnisat OS 1PB-1 Omnipolar Satellite (Pair) – Made in Canada
Both drivers fire upward into spoon-shaped OMNIGUIDE reflectors, giving 360-degree dispersion with a deliberate forward bias. 70 Hz to 20 kHz, 89 dB, cast aluminum woofer baffle and butyl surrounds rather than foam. These are the original 7 lb version; the later revisions come in under five. Very good condition.
Mirage Omnisat Wall & Ceiling Mount Clip – Original Factory Part
The factory clip supplied with the first-generation Omnisat, and the part its moulded base was shaped to accept. The clip goes on the wall or ceiling first and the speaker slides down onto it under its own weight — a one-person job, and the speaker lifts off again in seconds. Three-quarters of an inch of profile. Not the v2 bracket; the two do not interchange. Very good condition.
PSB PWB-1 Wall-Mount Brackets for Imagine Mini – Pair
PSB VisionSound VS300 Aluminum On-Wall Speaker
An on-wall speaker engineered as one rather than adapted into one. It shares the tweeter, terminals and crossover of PSB's VS400 floorstander, but the port was moved to the front so the cabinet can sit flat to a wall without the wall changing what it does — and a rear switch selects NORMAL or ON-WALL, filling the 400 to 500 Hz dip that hard mounting creates. Extruded aluminium, built in Pickering, Ontario. Graded Excellent or Very Good; the only thing separating the two is a single Tic Tac-sized hole at the extreme edge of one grille frame.
Polk Audio f/x 500i Bipole/Dipole Surrounds — Made in USA, Pair
A genuine mirror-imaged pair, labelled LC and RC, with two driver arrays set 45 degrees apart and a rear-panel switch that flips them between bipole and dipole — locatable effects on the wall behind you, a diffuse field on the side walls, same speakers either way. 19.4 lbs each, half again the weight of the FXi A6 that replaced them, and 2 dB more sensitive. Built in the United States, with keyhole mounts moulded into the cabinet. Very Good condition.
Mirage Omnisat V2 Wall/Ceiling Mount Bracket (OS v2B-1)
The factory bracket for the Omnisat v2, model OS v2B-1, for wall or ceiling. A single bolt threads into the base of the speaker and the plate anchors to the surface, keeping the satellite close in and correctly aimed — tidier and safer than a universal mount. The screw is included. Some paint transfer on the wall-facing side; the hardware itself is very good.
