Axiom CT-60 Floorstanding Speakers 2.5 Way – Canadian-Made
$245.00
Thirty-six inches tall on an eight-inch baffle: two 5.25-inch woofers and a 1-inch dome tweeter, wired 2.5-way so both woofers carry the midbass but only the upper one continues into the midrange. Rear-ported, so leave 8 to 18 inches behind them. 89dB sensitive and content on 25 watts. Designed and built in Canada. Good condition, tested.
1 in stock
Axiom CT-60 Floorstanding Speakers – Canadian-Made Towers, Good Condition, Tested
Bring classic Canadian hi-fi performance into your system with these Axiom CT-60 floorstanding speakers—slim, 36-inch tall towers designed and built in Canada and voiced in the tradition of Axiom’s NRC-inspired engineering. Featuring a 2.5-way, 3-driver configuration with dual 5.25″ woofers and a 1″ dome tweeter, the CT-60 delivers balanced, articulate sound with surprising bass authority from a compact footprint. With rear-ported enclosures, fixed cloth grilles, and gold-plated 5-way binding posts, these towers combine practical home-theater versatility with the neutral, detailed sound Axiom is known for. Tested and confirmed fully functional, they are an excellent choice for music or movies in a small-to-medium room.
Design and Sound:
The CT-60 follows Axiom’s long-standing design philosophy: accurate, wide-bandwidth sound from a relatively compact cabinet. At 36 inches tall and only 8 inches wide, each tower has a small footprint yet enough internal volume to deliver satisfying bass without relying on a subwoofer for everyday listening. The 2.5-way crossover design allows both 5.25-inch woofers to reproduce midbass, while only the upper woofer extends into the critical midrange frequencies—reducing intermodulation distortion and creating a more cohesive sonic image. The 1-inch dome tweeter handles high frequencies with the smooth, extended response that characterized Axiom’s collaboration with Canada’s National Research Council.
The rear-firing port extends low-frequency response while keeping the front baffle clean and décor-friendly, and the fixed front grille gives a tidy, understated look that blends easily into most living rooms. At 89dB sensitivity, the CT-60 is reasonably efficient, working well with amplifiers from modest vintage receivers (25+ watts) up to modern integrated amps and AVRs delivering 100 watts or more.
Placement and Use Cases:
Standing 36 inches tall with a modest 8-inch wide baffle, the CT-60 works well:
Main Left/Right Speakers – Stereo vinyl or streaming setup with genuine full-range performance.
Home Theater Front Channels – Timbre-matches well with other Canadian designs of the era.
Living Room / Den / Media Room – “Real speaker” dynamics without a visually imposing cabinet.
Rear ports prefer a bit of breathing room—ideally 8–18 inches from the back wall—allowing the bass alignment to work as intended while preserving clarity and imaging. Gold-plated 5-way binding posts provide a solid connection for bare wire, spades, or banana plugs.
Specifications:
Type: 2.5-Way Floorstanding Tower, Rear-Ported
Driver Configuration: Dual 5.25″ (133mm) Woofers + 1″ (25mm) Dome Tweeter
Enclosure: Ported MDF Tower with Fixed Cloth Grille
Nominal Impedance: 8Ω
Sensitivity: 89dB (2.83V/1m)
Power Handling: 100W RMS
Recommended Amplifier Power: 25–100W per channel
Terminals: Gold-Plated 5-Way Binding Posts
Dimensions: 203 × 914 × 305 mm (8″ W × 36″ H × 12″ D)
Weight: 13.6 kg (30 lbs) per speaker
Made in: Canada
Sound Character:
The CT-60 embodies the “Canadian school” of speaker design—neutral tonal balance, wide dispersion, and honest reproduction. The dual 5.25-inch woofers provide more cone area than a single 6.5-inch driver, yielding tighter, more controlled bass with better power handling. The 2.5-way crossover reduces the burden on each driver, allowing the upper woofer to focus on clean midrange while both woofers combine for solid low-frequency foundation. Expect a presentation that is open, detailed, and fatigue-free—ideal for long listening sessions with vinyl, streaming, or Blu-ray soundtracks.
Condition:
These CT-60 towers are in good overall cosmetic condition, with light wear consistent with age and responsible use. The fixed front grilles present cleanly, cabinet edges are intact, and there are no structural issues. Both speakers have been tested and verified: all three drivers output cleanly with no rubbing, buzzing, or distortion, and the rear ports and binding posts are intact and secure. Ready to drop into your system and enjoy.
Summary:
The Axiom CT-60 towers offer an appealing blend of Canadian engineering, slim floorstanding form factor, and neutral, room-friendly sound. For listeners who value clarity, imaging, and honest tonal balance over exaggerated “boom and sizzle,” they make an excellent choice as the backbone of a stereo or home-theater system—especially when paired with a quality Canadian or Japanese receiver. With dual woofers, 2.5-way design, and 89dB sensitivity, they deliver full-range performance that punches well above their modest size.
Purchase with Confidence
Includes Radique Audio “Bumper to Bumper” Warranty
Perpetual Trade-Back Policy—upgrade or swap with peace of mind
Canadian-built, tested, good condition, and ready to bring full-range performance to your room; asking $245.
| Weight | 65 lbs |
|---|---|
| Dimensions | 16 × 22 × 40 in |
Related Products
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
Monitor Audio Bronze 3 Towers — Shot-Loaded, Made in England
Dynaco A-35 Floor Standers — Ottawa Valley Cherry, Denmark
A pair of the famous Dynaco A-35 floor-standing loudspeakers, rebuilt in our shop with brand-new cabinets in genuine Ottawa Valley cherrywood veneer, expertly applied by hand, serviced, and fitted with upgraded five-way binding posts.
✔️ Condition: not graded with a word in the copy — cabinets are new work; drivers "through our service bench and perform as they should"; grilles NOT included
✔️ claimed, level unspecified — "been through our service bench"
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Paradigm 11se Mk II Towers, Pair — Dual 8″, Made in Canada
Built in Canada by Paradigm, and the largest speaker in the SE range — the one the rest of the series was working up to.
✔️ Condition: Good — cabinets touched up; repaired and working correctly
✔️ repaired, unattributed — Mark said "repaired now", not who; NO Level stated; do not attribute it to our bench without Mark naming it
✔️ Sold as-is — for parts or repair, no warranty
✔️ Curbside delivery, local collection or freight within Canada
Klipsch RF-62 Reference IV Floorstanding Speakers, Pair — 97dB
The RF-62 is the tower that made Klipsch's Reference line the default answer for anyone who wanted a big, unforced sound without buying a big, expensive amplifier to get it.
✔️ Condition: Good — cabinets carry touched-up wear; drivers Very Good throughout
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Curbside delivery, local collection or freight within Canada
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.













