Gorgeous Vintage 35 WPC Technics Receiver with Phono SA-300
$395.00
Out of stock
Email when stock available
The Technics SA-300 is a classic Vintage Japanese-made AM/FM stereo receiver from 1978-1979, offering excellent value and performance in an attractive cabinet.
This versatile 35 watts per channel receiver features a sophisticated design with a brushed aluminum faceplate, black inset knobs, and amber backlit tuning dial. Its direct-coupled output stage delivers clean, tight bass response, while the dual gate MOSFET FM tuner provides excellent sensitivity and interference rejection.
The SA-300 offers clean, detailed sound that punches above its weight class. Its reliable performance and attractive aesthetics make it a desirable vintage piece for audio enthusiasts.
Key features include:
35 watts per channel into 8 ohms with 0.04% THD
FM/AM tuner with dual function meter
Phono, Aux, and dual tape inputs
Bass, treble, and loudness controls
High filter switch
41-step volume control
Specifications:
Frequency response: 20Hz to 20kHz
Signal-to-noise ratio: 78dB (phono), 95dB (line)
Input sensitivity: 2.5mV (phono), 150mV (line)
Dimensions: 430 x 142 x 300 mm (17.1 x 5.6 x 11.8 inches), Weight: 7.7 kg (17 lbs)
Experience a piece of audio history with the Technics SA-300 – a well-crafted Japanese receiver that continues to impress decades after its release.
This SA-300 has been cleaned, tested, and de-oxidized, and is working beautifully. Asking $395.
| Weight | 20 lbs |
|---|---|
| Dimensions | 15.8 × 21.1 × 9.6 in |
Related Products
JVC JR-S201 Receiver – 35 WPC, Japan, SEA EQ, Excellent
Thirty-five watts a channel at 0.01% distortion with a damping factor of 70 — numbers most larger receivers of 1978 could not reach. A five-band S.E.A. graphic equalizer sits on the front panel at 40, 250, 1k, 5k and 15kHz, alongside MM phono, two tape loops and push-button speaker terminals. Made in Japan, arrived professionally serviced; cosmetically graded Excellent.
Pioneer SX-50 Silver Face Receiver – 50 WPC, Pre-Outs, 1983
Fifty watts a channel into 8 ohms at 0.007% distortion, and — unusually for a receiver this size — pre-out and main-in jacks on the back, so it can feed a subwoofer, take an equalizer in the loop, or hand off to a larger power amp. Introduced in 1983 with switchable CD and TV audio inputs, presets held by three AA cells, and the silver face of the decade that was ending. Graded Very Good.
Kenwood KR-A4070 Stereo Receiver – 60WPC, Phono, Original Remote
Sixty watts a channel into 8 ohms across the full band at 0.01% distortion, with an MM phono input at 2.5mV, a tape monitor loop, and separate bass, treble and balance. The original Kenwood remote is here, which is uncommon on a receiver of this age. Level 1 serviced; cosmetically graded Good, with honest wear for its years.
Sherwood S-7250 CP Stereo Receiver – 20WPC, Phono, Wood Cabinet
Twenty watts a channel into 8 ohms across the full 20 Hz to 20 kHz band, an MM phono input at 80 dB signal-to-noise, and a tape monitor loop. Sherwood built these in small runs in Chicago and sold them through the same shops that carried Marantz and McIntosh. Still in its original wood cabinet. Level 1 serviced here; condition Very Good.
Luxman R-117 Flagship Stereo Receiver — 160 WPC, MM & MC Phono
Technics SA-600 AM/FM Stereo Receiver 70 WPC — Japan
Sherwood S-8250 CP AM/FM Stereo Receiver 25 WPC
Twenty-five watts a channel into 8 ohms from Sherwood's Certified Performance series — the range where Sherwood printed the measured figures for the individual unit rather than for the model. MM phono, noise filter, mute/mono, loudness and A/B speakers, behind a brushed aluminium face with walnut-grain side panels. Level 2 serviced here: bias and DC offset set, every control deoxidised.
