Luxman R-115 Vintage Stereo Receiver – 70 WPC, Phono
$495.00
Out of stock
This one has sold. Want first dibs on the next one?
We take these in regularly. Leave your name and email, and we’ll email you the moment one is listed, so you hear first. No cost, no obligation.
Email me when one is listed
Give your next receiver Bluetooth. RA-Twin II, $39.00 →
Read the full listing and see all 3 photos ↓
Other stereo receivers we have in stock now
3 in stock · $495.00 · all ship
Sony STR-V55 Vintage Stereo Receiver – 55 WPC, Cherry Upgrade$495.00 – $514.00Price range: $495.00 through $514.00Ships
Carver HR-772 Sonic Holography Receiver – 140 WPC, Rack Ears$495.00Ships
Give your next receiver Bluetooth.
The RA-Twin II adds Bluetooth streaming to any vintage receiver or amp with a spare input. Phone to stereo in about a minute, and nothing on the receiver is modified.
RA-Twin II, $39.00 →Impressive Luxman 70 WPC Stereo Receiver with excellent Phono, Dual Sets of Pre-outs, Elite Quality (5-Gang) FM Tuner, and a wide range of other high end features.
Details below excerpted from HiFi Classic’s Exceptionally thorough and well written review: (If you don’t want to read all the details, please skim down to the summary down at the end).
Luxman’s R-115 stereo fm/am receiver offers an exceptional combination of high performance and functional, easy-to-use controls. It incorporates circuit and construction features of other Luxman products, including a Duo-Beta amplifier with separate wide-band and DC feedback paths and the STAR circuit layout, which minimizes signal-path lengths and is claimed to eliminate undesirable coupling between stages and through common ground paths.
The audio inputs of the receiver can be connected to a CD player, a turntable, and two tape decks, with dubbing from Tape 2 to Tape 1 and full monitoring facilities.
The internal signal sources of the R-115 are its digital-synthesis am and fm tuners. For installations where the fm band is supplied by a cable system, the normal 200-kHz tuning steps of the fm tuner can be changed to 25 kHz by an internal switch. The tuner has twenty preset memories in two banks of ten; each preset is assignable to an am or an fm channel.
The fm tuner features a new front end using dual-gate mosfet’s and five-gang varactor tuning for its preselector stages, which accounts for its exceptional image-rejection rating of 100 dB. The intermediate-frequency (if) section uses selected ceramic filters for improved group-delay characteristics and has a narrow-band reception mode in which an extra filter section is switched into the circuit. An auto-blend system reduces noise on weak stereo signals by narrowing the channel separation to 8 dB at 10,000 Hz.
The preamplifier section has two sets of output jacks, which can be used to drive additional amplifiers in multiple-room systems or to re- cord a signal after it has been modified by the tone controls or an external processor. The signal-processor in/out jacks are normally joined by a nearby slide switch on the rear apron. Input selectors are soft-touch push buttons that display a lighted bar when activated. An unusual feature is the separate CD straight button, which connects a CD player’s outputs to the receiver’s amplifier section directly, bypassing the tone and balance controls, loudness compensation, and subsonic filter.
Small buttons select the subsonic filter and loudness compensation or bypass the tone controls. Others select the fm tuner’s mono, stereo, or muting modes and wide or narrow if bandwidth, control the auto-seek FM tuning, and program the preset assignments. Larger, square buttons control the tape-dubbing connections, the two sets of speaker outputs, and power switching.
The display window shows the tuner’s selected frequency and band (even while one of the other inputs is in use), preset number, and operating conditions. Below it are the ten preset buttons and a large, center-pivoted rocker switch that moves the tuned frequency up or down the band. The tone and balance controls use small knobs with center detents, and the large volume-control knob contains a red LED as an index pointer.
The dual power amplifiers can deliver high currents. Although rated for only 70 watts continuous output into 8 ohms (from 20 to 20,000 Hz with no more than 0.03 percent total harmonic distortion), they are also rated to drive 2-ohm loads at up to 270 watts per channel for short periods. The large power transformer and filter capacitance give the receiver a 3-dB dynamic headroom over its rated power output into 8 ohms.
The rear apron contains the audio and video input and output jacks, a 75-ohm coaxial connector for the fm antenna, and binding-post terminals for the supplied removable wire-loop am antenna. A 300- to 75-ohm matching transformer is provided for use with 300-ohm fm antennas. The heavy, insulated binding posts for the two sets of speaker outputs accept the stripped ends of the speaker wires. Two of the three AC outlets are switched.
The attractively styled Luxman R-115 is finished in black with clear, legible white markings and red led indicators. It measures 17-1/4 inches wide, 16-3/4 inches deep and 5-1/2 inches high, and it weighs 25-1/2 pounds.
Lab Tests
The R-115’s power output at clipping into 8-ohm loads at 1,000 Hz was 105 watts per channel, well above its 70-watt rating. Into 4 ohms, the output was 148 watts, and into 2 ohms it was a potent 210 watts. The dynamic power output during a 20-millisecond tone burst was 170 watts into 8 ohms, 275 watts into 4 ohms, and 350 watts into 2 ohms. The 8-ohm clipping and dynamic headrooms were 1.77 and 3.85 dB, respectively.
The 1,000-Hz amplifier distortion was 0.01 percent or less up to the clipping point into 8- or 4-ohm loads and only slightly higher into 2 ohms. The distortion varied only slightly with power across the audio range, measuring between 0.006 and 0.02 percent from 20 to 20,000 Hz at power levels from 7 to 70 watts. The slew factor exceeded our measurement limit of 25.
The tone controls had a maximum range of about ±12 dB in the bass and ±10 dB in the treble. The loudness compensation was moderate, boosting the output by 8 and 6 dB, respectively, at the low- and high-frequency extremes. The subsonic filter appeared to have a 6-dB-per-octave slope, reducing the response by 2.5 dB at 20 Hz. The RIAA phono equalization was extremely accurate, varying only + 0.2, -0.1 dB from 20 to 20,000 Hz. The phono-input impedance was 47,000 ohms in parallel with a 175-picofarad capacitance.
As good as the amplifier section was, the fm tuner of the R-115 provided the major surprises of our test. It was very sensitive (10.8-dBf mono usable sensitivity and 14-dBf 50-dB quieting sensitivity) and had low distortion (about 0.05 percent in mono and 0.08 percent in stereo).
The frequency response was exceptionally flat, and the channel-separation readings were among the best we have measured, reaching 65 dB at 1,000 Hz. The 1-dB capture ratio was excellent, and the image rejection, 138 dB, was among the best we have encountered. The narrow – if operating mode for fm provided good selectivity without any significant increase in distortion, which remained under 0.08 percent in both mono and stereo. Even the am tuner was one of the better-sounding ones we have tested, with a frequency response down 6 dB at 20 and 3,000 Hz and a relatively low noise level.
Summary:
The Luxman R-115 is one of those too-rare products that looks good, feels good, and sounds good. Obviously, a lot of thought went into its design, and the result is a component that is thoroughly enjoyable to use and to listen to.
Most receivers in the middle and high price ranges have tuner sections that are quite good but present no challenge to a top-rank separate tuner. The fm section of the R-115, however, can hold its own with some of the best component tuners. It displayed superior capture ratio and image rejection, and we were also impressed with some characteristics that emerged in our tests, including its symmetrical response and tuning calibration that was accurate enough not to require detuning our signal generator for optimum performance.
The power-amplifier section of the R-115 exemplifies what appears to be a long-overdue trend toward high dynamic headroom in receivers. The weight, size, and cost of this receiver are consistent with those of a good 70-watt amplifier, but its actual power capability with real-world program signals and speakers is far greater.
The Luxman R-115, though not inexpensive, delivers good value for the money. It is also one of the few receivers that can hold its own with separate components anywhere near its price level.
The Luxman R-115 receiver has the following dimensions:
Width: 438 mm (17.24 inches)
Height: 139 mm (5.47 inches)
Depth: 424 mm (16.69 inches)
Weight: 11.6 kg (25.6 lbs)
Originally retailed for $750 USD. Asking just $495 Canadian for this exceptionally well designed and executed Luxman Receiver.
| Weight | 27.6 lbs |
|---|---|
| Dimensions | 20.7 × 21.24 in |
Luxman began in Osaka in June 1925 as the radio department of the Kinsuido picture-frame store, run by T. Hayakawa and his brother K. Yoshikawa, in the year radio broadcasting started in Japan. We carry Luxman stereo receivers, integrated amplifiers, preamplifiers, CD players, cassette decks and tuners. We've had 20 Luxman listings so far, covering 14 different models. Every used Luxman here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
The Luxman models we've sold most often: the RX-102 receiver, the DZ-111 CD player and the L-435 integrated amplifier.
The Luxman story, 1925 to today
Kinsuido was a picture-frame importer in Osaka. In 1925 it opened a radio department, which Luxman says was the first to display and sell radio sets in a store, and crowds stopped to listen. Its first products, the LUX-1730 phonograph and LUX-735 radio, followed in 1928.
Transformers and tubes. Lux developed its own OY-type output transformers in the early 1950s, and its first hi-fi product, the MA-7A tube power amplifier, arrived in 1958.
The Alpine years. In 1984 Luxman became part of Alpine Electronics, and some products were badged Alpine/Luxman. The fit was never easy, and Alpine sold the brand about ten years later.
Today. The International Audio Group bought Luxman in 2009, alongside Wharfedale and Quad. Luxman, based in Yokohama, celebrated its 100th anniversary in 2025.
Which Luxman is which?
Receivers: receivers such as the R-104, R-115 and our best-selling RX-102.
Integrated amplifiers: the L-series, such as the L-435.
CD players: D- and DZ-series players such as the DZ-111.
Cassette decks: K-series decks such as the K-100 and K-113.
Tube amplifiers: from the MA-7A of 1958 to models such as the MQ-88.
You may also like…
Radique Audio Gold Series RCA Stereo Interconnect Cable
RCA cables that are kind to vintage jacks: dual RCA to dual RCA, in 0.2, 0.75 or 1.5 m.
- Slim gold-plated plugs with vintage-safe grip pressure
- Dual shielding: aluminum foil and 128-strand braided copper
- Reinforced splitters; 7 mm gold cotton and nylon mesh jacket
- Three lengths, chosen above the Add to Cart button
- 1-year warranty
RA-Twin II Bluetooth Adapter for Vintage Stereo – Receiver & Transmitter
Add Bluetooth to any vintage stereo, amplifier or car stereo, or send your TV or stereo to Bluetooth headphones. Tiny but mighty, and set up in minutes.
- RX, TX and Mobile (microSD) modes
- Bluetooth 5.4, up to 10 m range
- Up to 10 hours per charge, USB-C
- Clear online manual in English & French
- 1-year warranty, Ottawa-based support
FM Dipole Antenna 300 Ohm Twin-Lead Indoor with Spade Connectors
Related Products
Carver HR-772 Sonic Holography Receiver – 140 WPC, Rack Ears
A Carver HR-772 stereo receiver, Carver's early-1990s flagship: 140 watts per channel, Sonic Holography, and rack ears with front handles.
✔️ Tested on our bench, Sonic Holography included
✔️ Very good condition
✔️ 140 WPC, stable to 2 ohms, MM phono, five-band EQ
✔️ Rack ears and handles for a 19-inch rack
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Sony STR-V2 Vintage Receiver – 25 WPC, Ottawa Valley Cherry
A 1978 Sony STR-V2 stereo receiver, dressed in Ottawa Valley cherry side panels hand-made by our master woodworker, Sean. Tested on our bench and working well.
✔️ 25 watts per channel, with a phono input for your turntable
✔️ Brushed silver faceplate with a long FM/AM dial and signal meter
✔️ Ottawa Valley cherry side panels, hand-made for this receiver
✔️ Tested on our bench and working well
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Onkyo TX-906 Stereo Receiver – 80 WPC, Dolby Pro Logic
An early-nineties Onkyo receiver with real power behind it and a phono input for your turntable, through our Level 1 service and playing as it should.
✔️ Good condition — works as it should; the black cabinet and faceplate present well
✔️ Through our Level 1 service — cleaned, deoxidized, checked and thoroughly tested on our bench
✔️ Phono input for your turntable, plus CD and two tape inputs
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Denon DRA-835R Vintage Stereo Receiver – 100 WPC, Made in Japan
The second-from-the-top model in Denon's early-nineties stereo receiver range, made in Japan and in very good condition, with 100 watts per channel, a phono stage, motorized volume and its original remote.
✔️ Very good condition — free of significant marks
✔️ 100 WPC, MM phono and motorized volume — made in Japan
✔️ Original Denon remote included
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Realistic STA-20 Compact AM/FM Stereo Receiver – 5 WPC, Serviced
Radio Shack's smallest AM/FM stereo receiver of the 1990s, the Realistic STA-20: 5 watts per channel, a rear EQ switch made for mini-speakers, a phono input and a front jack for a phone.
✔️ Serviced on our bench to our Level 1 standard
✔️ Very good condition
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
Akai AA-1115 Vintage Stereo Receiver – 15 WPC, Made in Japan
A slim late-1970s Akai AA-1115 AM/FM stereo receiver, made in Japan, silver face in its original woodgrain cabinet.
✔️ Tested on our bench, every input, output and control
✔️ Very good condition
✔️ MM phono, PLL FM tuner, speakers A and B
✔️ Covered by Radique Warranty
✔️ Includes Perpetual Trade-Back Program eligibility
✔️ Expertly packed for safe shipping
