High End PSB Tower Speakers in Black Ash Stratus Silver
$995.00
Out of stock
This one has sold. Looking for one?
We take these in regularly. Leave your name and we’ll email you the moment one arrives, before it goes up for sale.
Email me when one arrives
Whatever you end up with, it needs cable. Build a set to length →
Other towers we have in stock now
3 in stock · $445.00–$1,295.00 · all ship
PSB Imagine T Towers – Gorgeous Dark Cherry Real Wood Veneer$1,295.00Ships
PSB Image 4T 2.5-Way Tower Speakers — Made in Canada, Bi-Wire$445.00Ships
Attractive, Great Sounding B&W 3-Driver Floor-Standers DM603$895.00Ships
Whatever you end up with, it needs cable.
We hand-build speaker cable to your exact length and terminate it however you like: banana, spade, pin or bare wire. Tell us the run and the ends, and it ships ready to plug in.
Build a set to length →High End PSB Tower Speakers in attractive Black Ash, Beautiful Condition.
The Stratus Silvers used to be the 2nd best speakers in PSB’s lineup (after the Stratus Golds). However, compared to the Stratus Golds which were very power hungry and required a high current amp to sound their best, the Silvers are quite efficient and sound great with a wide variety of amplifiers from quality receivers to high end amps.
Another advantage the Silvers have over their bigger brother is that they are not nearly as sensitive to placement. Put the Golds too close to the back wall & they’re almost certainly sound boomy whereas the Silvers are significantly more versatile, placement-wise. For these reasons, many audiophiles actually prefer the Silvers over the Golds.
Frequency Range Response (Anechoic Chamber) On Axis @ 0° ±3dB 35-21000 Hz On Axis @ 0° ±1.5dB 40-20000 Hz Off Axis @ 30° ±1.5dB 40-10000 Hz Lf Cutoff -10dB 26 Hz
Sensitivity (1w (2.83V) @ 1m IEC-filtered Pink Noise C-weighted) Anechoic Chamber 89 dB, Typical Listening Room 91 dB
Impedance: Nominal 4 Ohms, Minimum 4 Ohms
Input Power (RMS Clipping < 10% of the Time) Recommended 15-250 Watts Program 200 Watts Dynamic Peak 400 W
Acoustic Design Tweeter (Nominal) 1″ (25 mm) Aluminum Dome with Ferrofluid
Woofer (Nominal) 2 x 6 1/2″ (165 mm) Polypropylene Cone Rubber Surround 1 1/2″ Voice Coil 20 oz (794 g) Magnet)
Crossovers 2100 Hz, 24 dB/octave Linkwitz-Riley 500 Hz, 18 dB/octave Butterworth
Dimensions Internal Volume 200 cu ft (56.27 liter)
Design Type: Bass Reflex, 2 1/2″ Front Port
Dimensions: Size (W x H x D) Millimeters 241 x 990 x 349 mm with 25 mm base, Inches 9 1/2 x 39 x 13 ¾” with 1″ base
Net Weight: Kilograms 25.2 kg /each, Pounds 56 lb /each
Original Price (CAN MSRP): $2399.00/pair + Tax
Only $995 for these fabulous, Canadian-made floor-standers from PSB.
| Weight | 112 lbs |
|---|---|
| Dimensions | 19 × 78 × 28 in |
Related Products
- >
- — We deliver in-person anywhere along the Windsor–Québec City corridor, carefully and on your schedule.
Tannoy Profile 633 (D30) Towers — Black Ash, UK-Built, Bi-Wire
Mirage 550 Towers — Made in Canada, Sealed 10-Inch, Walnut
Definitive Technology BP-10 4-Driver Bipolar Towers — USA-Built
Each tower is two complete two-way systems, one facing forward and one facing directly backward, both radiating in phase. That is the whole point: where a dipole panel's front and rear bass partially cancel and the speaker has to come several feet into the room, these reinforce each other and the tower is happiest eight to twelve inches off the wall. Four drivers a side, bass to 20 Hz, built in Baltimore. Graded Good, and the grade is the high-gloss end caps — three decades of black lacquer carries scuffs and a few small chips.
Tannoy Mercury F3 Slim Floorstanding Speakers — Apple Finish
A two-way floorstander built on a deliberately simple recipe: one 6.5 inch bass and midrange driver covering everything below a 1 inch textile dome, crossed at 2.7 kHz by a fourth-order Linkwitz-Riley — no midrange handover in the region the ear is most sensitive to, and drivers that sum flat and stay in phase through the crossing. 89 dB into a nominal 8 ohms, happy on anything from 10 to 100 watts, and eight inches wide. The light Apple finish hardly ever comes up. Very Good condition.
Totem Acoustic Sttaf Floorstanders — Maple, Made in Canada
Totem's slim, hand-built Montreal floorstander in the maple veneer the factory charged extra for — a single 5.5-inch driver and a textile dome in a narrow mono-shell cabinet that images far wider than its size and reaches 39 Hz. Happiest at civilised levels in a small to medium room. Fitted here with Radique Audio bi-wire bridges. Pair, ships from Kanata, ON.
Totem Claw Speaker Isolation Feet — Set of 6, Machined Aluminum
Totem's own decoupling feet — the same machined aluminium Claws the factory fits to the Forest and the Wind — as a complete set of six, enough for one pair of speakers at three per cabinet. They fix with the included self-tapping screws, so no threaded insert is needed, and work on hardwood, tile or concrete where spikes do not. Ball bearings included.
Paradigm Monitor 11 v3 Floorstanding Speakers – 5-Driver Towers
Energy Connoisseur C-8 Tower Speakers, High Gloss Black, Canada
🚚 Shipping Note for This Item
Due to its size, weight, or fragility, this product cannot be shipped by standard courier — but we’ve got you covered. We offer two great alternatives:
Personal delivery
>Freight shipping — We ship skid-mounted via freight carrier to anywhere in Canada, and we stand behind it — if something arrives damaged, we make it right.
Full details on both options are on our Curbside Delivery page. 👈
Ready to make it yours? To hold the item and avoid missing out, go ahead and purchase using Local Pickup at checkout — then contact us to arrange delivery or freight for an additional fee. We’ll take it from there!
