High Quality 100% Brand new! Nakamichi Speaker banana plug connector 24k Gold.
$5.00
Twenty-four carat gold plating on the contact, a double screw lock so the wire cannot back itself out, and a non-conductive aluminum jacket that prevents an accidental short across a pair of binding posts. Accepts 8 to 20 AWG, up to 4 mm of wire. Brand new, sold by the pair.
487 in stock
Easy to install on your speaker wires 24K gold plating for maximum signal transfer & durability these Nakamichi plugs can accommodate cable with wire size up to 4mm. Accepts 8AWG to 20AWG speaker wire. Double screw locking for good connection and strong adherence. Non-conductive aluminum jacket to prevent accidental shorts.
Selling Nakamichi Banana plugs for just $5 a pair.
| Weight | 0.036 lbs |
|---|---|
| Dimensions | 5.9 × 5.4 × 0.6 in |
Nakamichi began in Tokyo in 1948, founded by Etsuro Nakamichi as a research company, and its 1000 deck of 1973 is widely credited as the first three-head cassette deck. We carry Nakamichi cassette decks, receivers and CD players. We've had more than 140 Nakamichi listings so far. Every used Nakamichi here is inspected, tested and serviced as required, then photographed in-house and covered by our Bumper-to-Bumper Warranty and Perpetual Trade-Back Program. Don't see the model you want? Tell us on First Dibs and we'll email you when one arrives.
The Nakamichi story, 1948 to today
Etsuro Nakamichi founded the company in Tokyo in 1948 as a research firm, and his brother Niro later made it known for high-end cassette decks. Before selling under its own name from 1972, it built tape recorders and cassette decks for other brands, including Harman Kardon.
Three heads. The 1000 and 700 of 1973 were three-head decks with separate record and playback heads, and the 1000 is widely credited as the first. The two-head 500 and 600 followed in 1974 and 1975, and the "Silent Mechanism" transport arrived with the 580 series in 1978.
The Dragon. The Dragon of 1982 was Nakamichi's first deck to play in both directions, with automatic playback-azimuth correction (NAAC). It was made until 1993.
Beyond tape. Nakamichi made CD players from 1984, and its Stasis receivers and amplifiers of the late 1980s used a circuit licensed from Nelson Pass of Threshold. Hong Kong's Grande Holdings took over in the late 1990s, Nakamichi Japan went into court-supervised reorganisation in 2002, and the brand now sells mainly soundbars and home theatre systems.
Which Nakamichi is which?
First-generation decks (1973 to 1979): the 1000 and 700 (three heads, dual capstan), the 500 and 600, the 550 portable, and II versions.
Second-generation "Silent Mechanism" decks (1978 onward): the 480, 580 and 680ZX families, the 1000ZXL and 700ZXL, the ZX-7 and ZX-9, and the Dragon.
Third-generation decks (1982 to 1998): the BX, CR and DR families, such as the BX-300 and CR-7.
RX auto-reverse decks (1983): the RX-202, RX-303 and RX-505, which lift the cassette and turn it over.
Receivers and amplifiers: the 730 receiver (1978 to 1982), the Stasis SR receivers and PA amplifiers, and later receivers such as the RE-2.
CD players: the OMS models from 1984 and the MusicBank changers.
Buying used Nakamichi: what to check
Belts, idler and pinch rollers. Technicians say thin belts stretch even on the shelf, and many decks need a full transport overhaul: belts, idler tire and lubrication. Ask what has been done.
Azimuth and calibration. Recalibration needs test tapes and specialist equipment. Play a known-good tape, in both directions on an auto-reverse deck.
Heads. Dull sound can come from dirty, magnetised or worn heads. On a three-head deck, make a test recording too.
Model quirks. Owners report broken switch tabs on the RX-505, and first-generation transports have nylon posts that can break in shipping, so these decks need careful packing.
Parts. Many Nakamichi parts are now hard to find.
Everything we list is inspected, tested and serviced as required here, and comes with our warranty.
Related Products
- ✔️ Genuine Kimber Kable from an authorized Canadian dealer
- ✔️ RG59-based digital coax: 22 AWG solid copper, PE foam, foil and braid shields
- ✔️ Sold as a single cable: 0.75, 1.0, 1.5 or 2.0 m (up to 5 m to order)
- ✔️ Kimber Ultraplate RCA or gold BNC
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- ✔️ Genuine Kimber Kable from an authorized Canadian dealer
- ✔️ RG6-based digital coax: 18 AWG solid copper, foamed fluorocarbon, dual shield
- ✔️ Sold as a single cable: 0.75, 1.0, 1.5 or 2.0 m (up to 5 m to order)
- ✔️ Kimber Ultraplate RCA or gold BNC
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- Radique Audio banana plugs at the amplifier, bare wire at the speaker
- Kimber’s woven four-conductor 4PR braid
- From an authorized Canadian Kimber Kable dealer
- Free shipping within Canada
- 1-year warranty
- ✔️ Genuine Kimber Kable 4PR from an authorized Canadian dealer
- ✔️ Eight braided 19.5 AWG OFE copper strands, about 13 AWG per side
- ✔️ Bulk: choose Foot or Meter as the unit; ships unterminated and un-stripped
- ✔️ Want it terminated? Use our Custom Speaker Cable Builder
- ✔️ Final sale on custom-length bulk wire: please measure twice
- ✔️ Genuine Kimber Kable 4TC from an authorized Canadian dealer
- ✔️ Eight braided 19.5 AWG OFE copper strands in Teflon insulation, about 13 AWG per side
- ✔️ Bulk: choose Foot or Meter as the unit; ships unterminated and un-stripped
- ✔️ Want it terminated? Use our Custom Speaker Cable Builder
- ✔️ Final sale on custom-length bulk wire: please measure twice
- ✔️ Genuine Kimber Kable from an authorized Canadian dealer
- ✔️ Kimber’s three-wire braid of VariStrand ultrapure copper, PE insulation
- ✔️ Sold as a stereo pair: 0.5, 1.0, 1.5 or 2.0 m (up to 5 m to order)
- ✔️ Ultratike RCA, WBT-0114 Cu RCA, or balanced XLR
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- ✔️ Genuine Kimber Kable from an authorized Canadian dealer
- ✔️ The classic three-wire braid: VariStrand hyper-pure copper, fluorocarbon insulation
- ✔️ Sold as a stereo pair: 0.5, 1.0, 1.5 or 2.0 m (up to 5 m to order)
- ✔️ Ultraplate RCA, WBT-0114 Cu RCA, or balanced XLR
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
- ✔️ Genuine Kimber Kable from an authorized Canadian dealer
- ✔️ Four-wire braid of 19 AWG VariStrand copper, FEP insulation, hand-soldered
- ✔️ Sold as a stereo pair: 0.5, 1.0, 1.5 or 2.0 m (up to 5 m to order)
- ✔️ Ultraplate Black, WBT-0114 Cu or WBT-0102 Cu RCA, or balanced XLR
- ✔️ Pick up in Kanata by appointment, or shipped across Canada and internationally
Kimber Kable V21 Digital Coaxial Cable – RCA or BNC
Kimber Kable DV30 Digital Coaxial Cable – RCA or BNC
Kimber 4PR Speaker Cables, 2 m Pair – Banana to Bare Wire
The cable that converts sceptics: a matched 2 m pair of genuine Kimber Kable 4PR, hand-terminated by us.
Kimber 4PR Speaker Cables, 2.4 m (8 ft) Pair — Pin to Banana
A matched 2.4 m (8 ft) pair of Kimber Kable 4PR, hand-terminated in our shop: Radique Audio pins at the amplifier, banana plugs at the speakers.
✔️ New — hand-assembled in Ottawa by an authorized Kimber Kable dealer
✔️ Flexible pins for spring-clip terminals, bananas for binding posts
✔️ Matched pair, 2.4 m (8 ft) per cable
✔️ Covered by Radique Warranty
✔️ Expertly packed for safe shipping
